techlusion tfi installation
alright to move on to the next project....in installing the techlusion TFI do you plug the connectors on the tfi into the injectors at the heads or do you plug them in under the seat?.....do you have to remove the gas tank...how do you identify what to plug them into.......I have done it on a C50 and there you plugged into the injectors at the heads and had to remove the tank.
thanks |
techlusion tfi installation
The plug into the injectors between the cylinders. The instructions that come with it are quite good. You will likely need to at least lift the tank, most seem to, it is a tight fit to get in there without at least lifting the tank.
|
techlusion tfi installation
Kudz, I documented my installation with pictures in a thread in April of this year. The link to the thread is below.
http://www.vulcanbagger.com/phpBB3/v...t=9828&start=0 |
techlusion tfi installation
Quote:
|
techlusion tfi installation
Cajun did a great installtion write-up.
Although it can be done by lifting the tank, suggest you remove tank. Ideal time to remove all the plumbing and install coasters as well. Plus you can tighten quite a few things and check wires for rubbing, etc. |
techlusion tfi installation
Taking the tank off is real easy and the perfect time to tighten hoses/ rad coolant change etc
|
All times are GMT -4. The time now is 12:56 PM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.