2010 nomad stock got real hot real fast in hot weather
added dobeck fi2050st adjusted #1 pot @ 1800 rpm to best lean run & cooled it off really well later added chaps from the Canadian co. air-something and that helps too way to tell without guage just note how often the fan runs also check around the rad. heads. crank case with thermometer [infrared]
I only use the #1 pot to richen the low end up to @ 3000 rpm and it does not take as much as recommended im set less than 1:00 @3/4 if to rich u get slight stumble off idle u can adjust as often as needed until its right their directions are easy to follow esp. if u are used to engine/fuel repair
|