Quote:
Originally Posted by blowndodge
I ran 18 ga wire. I used a regular metal bolt and the nut that cinches down the air temp sensor down with the thin flat washer thats on the inside of the dog bowl. I ran the black wiring straight up underneath my gas tank, behind the plastic wiring loom covers at the steering stem and behind my right side chrome cover 6 inches below the top of my forks. behind that cover is part of your tubing for the front brakes lines. I used zip ties to secure it behind there and clipped off the excess. Pretty much invisible..
|
No Duct tape
jobs not done right if you don't use duct tape
Seriously though, do you think this mod would be an improvement on any FI Nomad\Vulcan with or without a tfi, open intake or aftermarket exhaust?