|
06-16-2015, 11:50 PM | #1 |
Member
Join Date: Feb 2008
Location: Stony Plain, Alberta
Posts: 153
|
Rear wheel
I've taken off rear rim and tire. When pushing on the pulley it moves about 1/2 " side to side. When read manual there are dampeners inside. Is this normally the movement?
__________________
John 1964 305 super hawk 1985 500 Shawdow 2006 900 Kawa Classic 2007 1600 Nomad 2013 Voyager Login or Register to Remove Ads |
|
06-17-2015, 12:47 AM | #2 |
Advanced Member
Join Date: Oct 2013
Location: Stockton, Ca.
Posts: 568
|
I have a 2011 vaquero. If its like mine it will pull free of the wheel assembly. The way it lays in your picture, just keep wiggling it and lift at the same time. I pulled mine while it was still under the rear of my skoot. It gave me more room to tilt the wheel assembly sideways and pull it out from under the swing frame. That way I didn't have to lift the rear frame up much at all. You need to remove the axle shaft spacers on both sides first then slide the wheel to the left so you have room to pull the wheel pulley free of the wheel.
__________________
Too much fun Is never enough. You make a living by what you get, You make a life by what you give. The measure of a man can be summed up by how he treats people who are the least significant to him. |
|
06-17-2015, 10:38 AM | #3 |
Member
Join Date: Feb 2008
Location: Stony Plain, Alberta
Posts: 153
|
Thanks, I took it all apart, and it looks ok.
__________________
John 1964 305 super hawk 1985 500 Shawdow 2006 900 Kawa Classic 2007 1600 Nomad 2013 Voyager |
|