Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > 1700 Nomad, Vaquero & Voyager

Reply
 
Thread Tools Search this Thread Display Modes
Old 06-04-2024, 01:56 PM   #1
Mcarmack29483   Mcarmack29483 is offline
Jr. Member
 
Join Date: Jan 2024
Location: South Carolina
Posts: 3
Replacing rear shocks

Got one rear shock dumping oil, want to replace both. OEM shock pricing is well, shocking...What are my options that are more budget friendly? These are air-over-hydraulic.

2014 Vulcan Vaquero ABS SE



Login or Register to Remove Ads
 
Reply With Quote
Old 06-04-2024, 02:21 PM   #2
redjay   redjay is offline
Top Contributor
 
Join Date: Feb 2008
Location: Ontario
Posts: 6,943
Let me guess, it was the drive side shock that was leaking ? I had mine replaced under warranty.

My guess is the dealers have replaced quite a few that were not covered by the warranty. I would start there for a recommendation ?

Have you looked at the Progressive website for a replacement shock ?
 
Reply With Quote
Old 06-04-2024, 03:57 PM   #3
Mcarmack29483   Mcarmack29483 is offline
Jr. Member
 
Join Date: Jan 2024
Location: South Carolina
Posts: 3
Yep, the drive side....The dealer here is of no help. Warranty long expired. Please send a link for Progressive. Thanks
 
Reply With Quote
Old 06-04-2024, 07:01 PM   #4
redjay   redjay is offline
Top Contributor
 
Join Date: Feb 2008
Location: Ontario
Posts: 6,943
https://www.progressivesuspension.com/products/metric
 
Reply With Quote
Old 06-04-2024, 07:43 PM   #5
Mcarmack29483   Mcarmack29483 is offline
Jr. Member
 
Join Date: Jan 2024
Location: South Carolina
Posts: 3
Quote:
Originally Posted by redjay View Post
Progressive has obsoleted the shocks for my model/year...Looks like I'm stuck with the $922 OEM that's not serviceable. Can't replace both. Ugh



Login or Register to Remove Ads
 
Reply With Quote
Old 06-04-2024, 08:00 PM   #6
plumber63   plumber63 is offline
 
plumber63's Avatar
 
Join Date: Apr 2012
Location: NE Indiana
Posts: 989
https://www.ebay.com/itm/26521845245...DLi5WllW4_RWRA

These say they fit
__________________
Troy Donat
VBA #02401
2015 Voyager
2006 1600 Nomad black(sold)

2016 Salem, Antlers,
2017 Eureka Springs, Lake George, Antlers
2018 Custer NR, Antlers
 
Reply With Quote
Old 06-04-2024, 08:07 PM   #7
plumber63   plumber63 is offline
 
plumber63's Avatar
 
Join Date: Apr 2012
Location: NE Indiana
Posts: 989
This is from a older thread off the Vulcan forum. Not my bike or post. But may help.

Here’s my mods to a 2011 Voyager:
Ohlins HD 146 rear shocks with Racetech 4825040R springs. 47.8mm diameter, 254mm long, 4kg/mm spring spec. About 25mm preload.
Shock has same stock eyelet mount size, no shims required. The mount end is a little narrower than stock. I added one washer.
Racetech front springs 1.1 kg/mm. Racetech spring selector will indicate preload. Stock is 35mm

Kawasaki manual says 3.2” rear wheel travel. Stock shock sag with just bike is about 3/8” @ 30 psi air. With rider and gear 1”. Sag with Ohlins shock about the same.
Manual says about 390 lb front, 500 lb rear . Each fork or shock carries 1/2 fr-rr respective load.

I found the stock suspension soft in front, too much dive on braking. The replacement springs are constant rate to calculate rate needed for preferred sag with preload. You can’t go wrong choosing near the stiffest springs from Racetech. These bikes are heavy.

Peg observation correct, that Ohlins shock much better than stock. Wife and I ride loaded to near but under GVWR.
__________________
Troy Donat
VBA #02401
2015 Voyager
2006 1600 Nomad black(sold)

2016 Salem, Antlers,
2017 Eureka Springs, Lake George, Antlers
2018 Custer NR, Antlers
 
Reply With Quote
Old 06-04-2024, 08:25 PM   #8
plumber63   plumber63 is offline
 
plumber63's Avatar
 
Join Date: Apr 2012
Location: NE Indiana
Posts: 989
This is from that same post Using the shocks off EBAY.

I just ordered and installed these. I'm 300 lbs, usually ride 1 up with approx 30-40 lbs of gear in storage. They do lower the bike .75 inches in the back and I also let my front end down on the pinch clamps about 1/2 inch. Pipes do scrape a little on hard corners but you can ride in such a way to avoid this. Let me tell you.. I was a little skeptical due to the price point but the handling is night and day. It has 5 preload settings. Got mine on 4 - fairly stiff but I'm a big dude. Bike has never ridden better. Kawasaki VN1700 Voyager 13.25" Dual Spring Short Black Shocks | eBay They also come in chrome same price.

https://www.ebay.com/itm/26522078660...IAAOSwVNtg5HKS

https://www.ebay.com/itm/25504372248...gAAOSwmPpkhgfS
__________________
Troy Donat
VBA #02401
2015 Voyager
2006 1600 Nomad black(sold)

2016 Salem, Antlers,
2017 Eureka Springs, Lake George, Antlers
2018 Custer NR, Antlers
 
Reply With Quote
Reply





Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.