|
06-07-2014, 11:00 PM | #1 |
Member
Join Date: Sep 2013
Location: Ohio
Posts: 83
|
gas in the oil
Ok, I did my first oil change today, it was a bit overdue at 1300 miles but the dealer can't get me in for first service till the 14th.
I drained out the old oil and got a bit on my hand, just wiped it off and finished the change. After I was done my hand smelled like gasoline. I couldn't figure out where I got gas on me. I smelled the oil in the drain pan and it reeked of gas. Checking the oil level in the bike after a ride the dipstick smells like gas too. Google searches tell be it's probably a faulty fuel petcock or the float in the carb is stuck open. Nothing about fi bikes. What the hell is going on here? The only thing I've done is put slip on exhaust on her. Login or Register to Remove Ads |
|
06-08-2014, 06:50 AM | #2 |
Join Date: Oct 2013
Location: chandler okla
Posts: 854
|
gas in the oil
Take it to the dealer and have them look at the stick! document what They tell You and see what They say .But if it is getting gas in the oil You should not ride it .They should step right up and take care of it .
|
|
06-08-2014, 08:33 AM | #3 |
Join Date: May 2009
Location: Montreal QC
Posts: 12,034
|
I am assuming this is a new bike with only 1300 miles on it, you don't have any info listed in you sig line.
Has your oil level gone up since the change? If there is fuel getting in the gas, I'd guess it might be a leaky injector letting some drip into a cylinder when you shut off the bike.
__________________
Norm Ward 2008 blue / silver nomad kawanow / VBA #01136 |
|
06-08-2014, 08:38 AM | #4 |
Top Contributor
Join Date: Feb 2008
Location: Ontario
Posts: 6,982
|
I would save the oil you drained out of it and take it to the dealer when you take the bike in.
Last edited by redjay; 06-08-2014 at 09:01 AM.
|
|
06-08-2014, 09:42 AM | #5 |
Sr. Contributor
Join Date: Nov 2007
Location: Way East Valley
Posts: 12,017
|
What year and model bike is it?
I think the oil they put in new bikes is break in oil, at least it used to be. It's thinner and I remember when I did my first oil change on my 1600 Nomad the oil was beat to piss and stunk. Not so much after that. If you have a 1700, did you drain both drain locations? There are two plugs.
__________________
Ponch VBA 0019 VROC 8109-R BMWMOA 162849 BMWRA 41335 BMW: When you care enough to ride the very best. My Motorrad Blog My Motorrad YouTube 2009 BMW R1200RT Previous bikes:2007 Nomad | 2001 Vulcan 800 Classic | 1984 GPz750 | 1978 KZ1000A2 Rallies: Custer '09|Prairie Du Chien '10|Crescent City '11 Login or Register to Remove Ads |
|
06-08-2014, 09:51 AM | #6 |
Top Contributor
Join Date: Feb 2008
Location: Ontario
Posts: 6,982
|
I think it is a brand new Vaquero ?
|
|
06-08-2014, 10:10 AM | #7 |
Member
Join Date: Sep 2013
Location: Ohio
Posts: 83
|
It's a 13 vaquero. Dunno how to get my Sig line to show up
__________________
VBA# 2750 13 vaquero flat black 05 c50 limited edition |
|
06-08-2014, 10:11 AM | #8 |
Sr. Contributor
Join Date: Nov 2007
Location: Way East Valley
Posts: 12,017
|
Should be a rule that posters put the year, model and brand in the title. It is on other forums I am on, but then BMW people tend to be anal. If it's a 1700, my comments apply. The 900 is like the 800, so it has one drain plug, but has a screen as well. Not sure if the 1700 has a screen. It's a real good idea to clean the screen the first time around.
__________________
Ponch VBA 0019 VROC 8109-R BMWMOA 162849 BMWRA 41335 BMW: When you care enough to ride the very best. My Motorrad Blog My Motorrad YouTube 2009 BMW R1200RT Previous bikes:2007 Nomad | 2001 Vulcan 800 Classic | 1984 GPz750 | 1978 KZ1000A2 Rallies: Custer '09|Prairie Du Chien '10|Crescent City '11 |
|
06-08-2014, 10:12 AM | #9 |
Sr. Contributor
Join Date: Nov 2007
Location: Way East Valley
Posts: 12,017
|
Did you drain both plugs?
__________________
Ponch VBA 0019 VROC 8109-R BMWMOA 162849 BMWRA 41335 BMW: When you care enough to ride the very best. My Motorrad Blog My Motorrad YouTube 2009 BMW R1200RT Previous bikes:2007 Nomad | 2001 Vulcan 800 Classic | 1984 GPz750 | 1978 KZ1000A2 Rallies: Custer '09|Prairie Du Chien '10|Crescent City '11 |
|
06-08-2014, 10:14 AM | #10 |
Member
Join Date: Sep 2013
Location: Ohio
Posts: 83
|
Yeah, I pulled both drain plugs and filter. The original oil was black as coal. I'm gonna put up some of the old oil and block off the pair valve today. Love this ride but glad it's under warranty.
__________________
VBA# 2750 13 vaquero flat black 05 c50 limited edition |
|
06-08-2014, 10:17 AM | #11 |
Sr. Contributor
Join Date: Nov 2007
Location: Way East Valley
Posts: 12,017
|
And it will be, especially after 1300 miles. Not sure what you replaced it with, but you might want to dump that oil after 3000 miles and then go on schedule.
__________________
Ponch VBA 0019 VROC 8109-R BMWMOA 162849 BMWRA 41335 BMW: When you care enough to ride the very best. My Motorrad Blog My Motorrad YouTube 2009 BMW R1200RT Previous bikes:2007 Nomad | 2001 Vulcan 800 Classic | 1984 GPz750 | 1978 KZ1000A2 Rallies: Custer '09|Prairie Du Chien '10|Crescent City '11 |
|
06-08-2014, 10:30 AM | #12 | |
Member
Join Date: Sep 2013
Location: Ohio
Posts: 83
|
Quote:
As for new users putting info in the Sig line, gotta give folks time to figure out how.
__________________
VBA# 2750 13 vaquero flat black 05 c50 limited edition |
|
|
06-08-2014, 10:56 AM | #13 |
Sr. Member
Join Date: Jul 2013
Location: Mesa Az
Posts: 1,400
|
The only way I can think of that gas would be in the oil is one of your fuel injectors is leaking fuel into the cylinder. The gas would work itself past the piston rings into the crankcase. If there is raw gas dripping into one cylinder when you start it up I would expect a backfire from the muffler due to the excessive fuel collecting in there. Is it doing that?
Whatever the case, I would take it to the dealer right away.
__________________
---------------------------------------------------------------------------------------------------------------------------------------------------------------- '05 1600CL. Originator 18" Harley wheel mod, Dobeck TFI, True Duals, Mutazu hardbags, Flanders handlebars n' a bunch more. Sometimes I miss the good ol' days but most times I'm just glad I survived them |
|
06-08-2014, 11:05 AM | #14 |
Member
Join Date: Sep 2013
Location: Ohio
Posts: 83
|
It's not backfiring at startup but popping like crazy on decel between 1500 and 2k rpm.
__________________
VBA# 2750 13 vaquero flat black 05 c50 limited edition |
|
06-08-2014, 02:00 PM | #15 |
Sr. Member
Join Date: Aug 2008
Location: wheatland,wy.
Posts: 3,642
|
they all pop on decal after installing aftermarket exhaust,there are ways to mitigate that as I am sure you will learn.lot's of post on here dealing with that subject.
__________________
bob wittman VBA # 745 COG #11621 wheatland,wy. rallies-custer 09,kalispell 10,crescent city 11,kanab 12,estes park 13,orifino 14.,red lodge 16 2015 ninja 1000 abs 2014 concourse 14 2012 concourse 14-sold 2011 vaquero-sold 2008 nomad-sold 2005 classic-sold |
|