|
04-14-2017, 09:17 AM | #1 |
Member
Join Date: Aug 2014
Location: Saskatoon
Posts: 57
|
Exhaust Gaskets
Received and going to install my new FP 2 into 1 exhaust. The stock exhaust is removed but I cant seem to locate the old gaskets? I have a set of new OEM gaskets and was wondering if it makes a difference which side they're installed (facing) in that one side of the gasket is flat and one side is rounded. Any suggestions/thoughts
Login or Register to Remove Ads |
|
04-14-2017, 09:41 AM | #2 |
Sr. Member
Join Date: May 2015
Location: Saskatchewan , Canada
Posts: 1,441
|
Good morning ! I had the same question when I installed my V&H's about three years ago . The boy's at the dealer told me to put the flat side towards the engine and to use a little grease to hold them in place . It made sense to me . Haven't had any issues !!
Enjoy your day !! |
|
04-14-2017, 11:20 AM | #3 | |
Member
Join Date: Aug 2014
Location: Saskatoon
Posts: 57
|
Quote:
Any idea what I should torkue the acorn nuts and should I use a locktite? |
|
|
04-14-2017, 11:41 AM | #4 |
Advanced Member
Join Date: Apr 2014
Location: N.C.
Posts: 727
|
NO loctite, and re- torque after the engine has ran and is still hot
__________________
" If your like most people its not for you " VULCAN VAQUERO |
|
04-14-2017, 07:47 PM | #5 |
Join Date: May 2009
Location: Greenwood, Ark.
Posts: 4,736
|
Use some anti-seize.
__________________
Dave Jesse 2012 1700 Gray/Black Voyager 2006 1600 Nomad Green/Silver Sold VBA #1108 2010- Eureka Springs - Antlers - 2011- Maggie Valley - Antlers 2012- Margaritaville Ride - Van Buren - Antlers - 2013- Estes Park - Antlers 2014- Mountain View - Antlers - 2015- Eureka Springs - Antlers 2016- Salem - Antlers - 2017- Eureka Springs - Lake George - Antlers - 2018- Custer - Antlers Login or Register to Remove Ads |
|
04-15-2017, 06:14 AM | #6 |
Join Date: May 2015
Location: DBQ Iowa
Posts: 1,807
|
|
|