Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > 1700 Nomad, Vaquero & Voyager

Reply
 
Thread Tools Search this Thread Display Modes
Old 06-15-2015, 09:57 AM   #1
gv550   gv550 is offline
Advanced Member
 
Join Date: Jan 2009
Location: Listowel, Ontario
Posts: 642
Garry's Fork Brace

Last winter I developed a fork brace for my Voyager, and have had it on my bike now for 20,000 kms. I continue to be amazed at how well it works, the suspension moves more freely and the bike is very stable through curves and bumps. I now have a post in the Classified section for anyone interested in purchasing one for their bike.
Attached Images
File Type: jpg fork brace 003.jpg (90.4 KB, 362 views)
__________________


Garry

2009 1700 Voyager KACT, sold at 679,465 kms
2011 1700 Nomad
Improve handling, suspension and tire life
with Garry's Fork Brace.
PM for details.



Login or Register to Remove Ads
 
Reply With Quote
Old 06-15-2015, 11:25 AM   #2
smokey   smokey is offline
Sr. Member
 
smokey's Avatar
 
Join Date: Mar 2012
Location: Orleans, ON, Canada
Posts: 1,162
Got one off Garry last week and it goes on and fits very well, a little tight to get on but if you follow the instructions it goes on pretty good, the hardest part was taking the forks off to remove the chrome cover, I ended up putting the rubber fork protectors on, I found that if I leave the bottom of the rubber boots free from the clamp they work just as well. Make sure you put a small hole in the bottom to let the air out when the rubber compresses or else it can split the boot over time.
__________________
Smokey
Capt(retd) Canadian Forces
National President CVFR
(Canadian Veteran Freedom Riders)
2010 VN1700 Voyager, ABS
www.cvfr.ca
VBA #02220
 
Reply With Quote
Old 06-15-2015, 11:43 AM   #3
RACNRAY   RACNRAY is offline
Sr. Member
 
RACNRAY's Avatar
 
Join Date: Sep 2011
Location: SOUTH FLORIDA
Posts: 1,210
I concur!!!

I too have this brace from Garry. It was most certainly a well needed improvement to the front end of my Vaq...WELL WORTH THE $$!!!



THANX GARRY!!!

RACNRAY
__________________
"TRUE HAPPINESS IS IN THE HEART, NOT IN THE OUTSIDE FIXES"
WITH OVER 46 YEARS AS A MOTORCYCLE TECHNICIAN/HI-PO SHOP OWNER I AM A PURVEYOR OF FACT NOT FICTION!
"WE LIVE OUR LIVES IN CHAINS NEVER KNOWING WE HAD THE KEY"
 
Reply With Quote
Old 08-16-2015, 07:34 PM   #4
tonik   tonik is offline
Advanced Member
 
Join Date: Dec 2009
Location: Cleveland Ohio
Posts: 714
Add me to the list of satisfied customers. Ordered it last weekend, it arrived from Canukistan in five days. EDIT: There was no import or duty taxes.

Looks: As you can see below, it looks factory. The cnc'd aluminum is almost identical to the brushed aluminum look of the lower half of the forks. I went nekkid on the boots, I am thrilled with the appearance. It looks very cool on the bike. Not worried at all about no boots, it's a street bike. Fork seals will be fine.

Install: No big deal, if you have ever taken your forks out, that is all you do. I installed it, changed the fork oil and put on front brake pads in 2.5 hours including putting the tools away.

Performance: I push my Voyager hard, I love curves and twisties. I have a 20 mile route near home that is my after work stress reliever. I know every corner and bump like the back of my hand. I hit it hard this morning and this is one of the top mods I have ever done on any bike as far as bang for the buck. It now runs the corners like it is on rails. Prior to adding this it did not make me confident, I could feel the forks flexing and the bumps made it worse. I have no idea why this thing makes bumps better...even in a straight line...but I am certain it does. The improvement in front end handling is massive.

Pics below. Any questions feel free to ask me. This is an unpaid endorsement. I don't know Garry and if this thing sucked I would say so. Thank you Garry, you have made a great bike awesome.
Attached Images
File Type: jpg IMG_20150815_190623.jpg (42.6 KB, 201 views)
File Type: jpg IMG_20150815_190600.jpg (58.0 KB, 178 views)

Last edited by tonik; 08-17-2015 at 10:56 AM.
 
Reply With Quote
Old 08-17-2015, 12:28 AM   #5
hayes   hayes is offline
Member
 
hayes's Avatar
 
Join Date: Apr 2013
Location: Aurora CO
Posts: 302
Why doesn't this work for the Nomad?
__________________
|| Former President | Denver Vulcan Riders Association | Chapter 1-30 ||
||2012 Kawasaki Nomad||
||VBA #03091||



Login or Register to Remove Ads
 
Reply With Quote
Old 08-17-2015, 05:54 AM   #6
HwyRider   HwyRider is offline
 
HwyRider's Avatar
 
Join Date: Jun 2013
Location: South Shore, MA
Posts: 4,629
Back in the old days a fork brace was used to tighten up the front end of large touring bikes or bikes without fender. There really isn't any need for one on the Nomad.
__________________
VBA # 02424
VROC # 35971

2010 Nomad 1700
Metallic Diablo Black/Metallic Titanium
 
Reply With Quote
Old 08-17-2015, 07:56 AM   #7
gv550   gv550 is offline
Advanced Member
 
Join Date: Jan 2009
Location: Listowel, Ontario
Posts: 642
Quote:
Originally Posted by hayes View Post
Why doesn't this work for the Nomad?
The 1700 Nomad has smaller diameter fork tubes and narrower centre-to-centre distance than the Voyager and Vaquero. 1500 and 1600 Nomads are even smaller again. My brace fits only the large diameter slider and centre distance.
Any Nomad, and especially those with added trunk and/or fairing could definitely benefit from a fork brace. I'd need a donor bike to work with.

Edit.... VN1700 Nomad fork brace is now available.
__________________


Garry

2009 1700 Voyager KACT, sold at 679,465 kms
2011 1700 Nomad
Improve handling, suspension and tire life
with Garry's Fork Brace.
PM for details.

Last edited by gv550; 03-01-2017 at 08:02 PM.
 
Reply With Quote
Old 08-17-2015, 10:51 AM   #8
hayes   hayes is offline
Member
 
hayes's Avatar
 
Join Date: Apr 2013
Location: Aurora CO
Posts: 302
I'd donate, but you're a little far.
__________________
|| Former President | Denver Vulcan Riders Association | Chapter 1-30 ||
||2012 Kawasaki Nomad||
||VBA #03091||
 
Reply With Quote
Old 08-17-2015, 09:15 PM   #9
ringadingh   ringadingh is offline
 
ringadingh's Avatar
 
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
Ive often thought that a fork brace would help a lot on my Nomad, but it may be tough to make one that fits because of the fork design. I can feel the forks flex a fair bit when I'm going through the corners.
I'm in Newmarket, if you need a donor bike, perhaps we could get together if your interested in trying to make one work.
__________________

2002 Nomad aka Bountyhunter
VBA #27
VROC #18951
 
Reply With Quote
Old 08-17-2015, 10:26 PM   #10
gv550   gv550 is offline
Advanced Member
 
Join Date: Jan 2009
Location: Listowel, Ontario
Posts: 642
Quote:
Originally Posted by ringadingh View Post
Ive often thought that a fork brace would help a lot on my Nomad, but it may be tough to make one that fits because of the fork design. I can feel the forks flex a fair bit when I'm going through the corners.
I'm in Newmarket, if you need a donor bike, perhaps we could get together if your interested in trying to make one work.
Private message sent.
__________________


Garry

2009 1700 Voyager KACT, sold at 679,465 kms
2011 1700 Nomad
Improve handling, suspension and tire life
with Garry's Fork Brace.
PM for details.
 
Reply With Quote
Old 09-12-2015, 04:11 PM   #11
gv550   gv550 is offline
Advanced Member
 
Join Date: Jan 2009
Location: Listowel, Ontario
Posts: 642
Thanks to Steve (ringadingh) I have used his Nomad to prototype a fork brace for the 1500. See the classified section for details.
__________________


Garry

2009 1700 Voyager KACT, sold at 679,465 kms
2011 1700 Nomad
Improve handling, suspension and tire life
with Garry's Fork Brace.
PM for details.
 
Reply With Quote
Old 09-13-2015, 12:09 AM   #12
dlars   dlars is offline
Member
 
dlars's Avatar
 
Join Date: Oct 2012
Posts: 89
Smile

Quote:
Originally Posted by RACNRAY View Post
I too have this brace from Garry. It was most certainly a well needed improvement to the front end of my Vaq...WELL WORTH THE $$!!!



THANX GARRY!!!

RACNRAY
It's good to hear that it worked for you but I'm just curious as to what issues you folks were having with the bikes that warranted the installation of an additional brace. I did have some front end wandering with my old tires and it didn't inspire much confidence in high speed corners. With a new set of tires at factory spec pressure and fresh fork oil I can let go of the bars at speed or hit any corner with a light touch on the bars and she is rock solid. I actually don't recall the bike riding this nice even when it was new

Last edited by dlars; 09-13-2015 at 12:11 AM.
 
Reply With Quote
Old 09-13-2015, 07:47 PM   #13
gv550   gv550 is offline
Advanced Member
 
Join Date: Jan 2009
Location: Listowel, Ontario
Posts: 642
Quote:
Originally Posted by dlars View Post
It's good to hear that it worked for you but I'm just curious as to what issues you folks were having with the bikes that warranted the installation of an additional brace. I did have some front end wandering with my old tires and it didn't inspire much confidence in high speed corners. With a new set of tires at factory spec pressure and fresh fork oil I can let go of the bars at speed or hit any corner with a light touch on the bars and she is rock solid. I actually don't recall the bike riding this nice even when it was new
I can't speak for Ray, but I can go through my reasons for wanting a fork brace. As you say, with new tires, fresh fluids and good maintenance the stock Voyager actually feels quite solid and well mannered, but I found when riding 2-up, full saddlebags and a trunk full of 'girl' stuff my steering would begin to feel rubbery and the bike would not hold a steady line through a curve if there were any bumps or tar snakes. I have a fork brace on my KLR and felt the improvements it made so I began thinking of a way to mount one on my Voyager. The KLR brace is 9 separate pieces plus 8 capscrews, and 4 nuts...... but I wanted something much simpler and stronger for the big bike. I came up with the design you see here, one piece of aluminum and 2 capscrews.... and no Kawasaki parts are modified, the bike can be put back to stock if you don't like the brace on there.
After installing the brace the bike handles significantly better when loaded heavy, to the point of not being able to feel any flex at all through bumpy curves. As an added benefit, the front suspension just performs so much better even when travelling straight, solo or 2-up.
This mod certainly won't appeal to everyone, and for many riders it may not be warranted.
I recall when Ray introduced his throttle mod, lots of discussion, even a few critics but those who tried it raved about it. I expect there are several hundred riders out there with modified throttle tubes and I haven't heard of anyone wanting it put back to stock!
Same with the fork brace, after having tasted the nectar of better handling and suspension I could never go back to stock..... honestly I'd sell the bike and get a Triumph Trophy or Connie14 if I had to remove the brace.
__________________


Garry

2009 1700 Voyager KACT, sold at 679,465 kms
2011 1700 Nomad
Improve handling, suspension and tire life
with Garry's Fork Brace.
PM for details.

Last edited by gv550; 09-13-2015 at 08:05 PM.
 
Reply With Quote
Old 09-13-2015, 07:51 PM   #14
hayes   hayes is offline
Member
 
hayes's Avatar
 
Join Date: Apr 2013
Location: Aurora CO
Posts: 302
Let me know if you make one for the 1700 nomad.
__________________
|| Former President | Denver Vulcan Riders Association | Chapter 1-30 ||
||2012 Kawasaki Nomad||
||VBA #03091||
 
Reply With Quote
Old 09-13-2015, 09:51 PM   #15
duffy   duffy is offline
Sr. Member
 
duffy's Avatar
 
Join Date: Apr 2009
Location: Hot Springs, SD and other warm and dry places
Posts: 1,043
Do you make one for the 1500 Classic FI?
 
Reply With Quote
Reply





Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.