ECU Flash from Ivan's Performance available - Page 34

Lumberjack · 06-07-2016, 07:27 PM

I feel bad for those who don't have a spare ECU...

Quote:

Originally Posted by Puckman77

Had the reflash done at Ivan's shop yesterday since I live a 30 minute drive south of him. I feel bad for those that had to ship their ECU in. As everyone knows, no matter the product you are researching, nothing beats side by side or in this case, back to back comparisons. To ride to his shop in stock form and then leave with the reflash is to immediately be able to compare the difference...I was expecting noticeable improvement from this thread, but WOW!!!!
I also have the RACNRAY throttle mod which is 10000% compatible. I will never know if I would have needed it if I knew about the reflash first, but I don't regret getting it either as it DID improve low speed drivability for a very reasonable price while waiting for Ivan's work to be done on the 2015s.
As many of you have noted, it is like getting a new bike.
Thank you Ivan!

Scootergptx · 06-08-2016, 08:38 AM

Quote:

Originally Posted by Lumberjack

I feel bad for those who don't have a spare ECU...

I got lucky. Went on a 10 day vacation. Sent it off before I left. Got a call from Ivan saying it was ready about 4 days after I left. It was waiting for me when I got home.

Even better, got this slid by the wife and she still doesn't know.

notmighty · 06-08-2016, 08:51 AM

Quote:

Originally Posted by Scootergptx

I got lucky. Went on a 10 day vacation. Sent it off before I left. Got a call from Ivan saying it was ready about 4 days after I left. It was waiting for me when I got home.

Even better, got this slid by the wife and she still doesn't know.

mine shipped back from Ivan Tuesday when he called he said there is something that has to be done prior to install, I said yeah I know disconnect the o2. But he said there was something else, what is it?

I've been racking my brain trying to figure out what it is, I was a little frustrated that he wouldn't take 30seconds to explain it to me but I had already given him my CC info so he was done with my sale LOL.

Scootergptx · 06-08-2016, 09:02 AM

Did you get the instruction page with the ECU? I don't recall having to do anything before putting it back in. You do have to unhook the battery. I'd have to check to be sure on which terminal. Someone with a better memory may know that offhand. Install the ECU, hook the battery back up, then turn the key on (don't start it) for a few seconds for the system to recognize the ECU.

Lumberjack · 06-08-2016, 09:57 AM

Plug it in turn on bike (don't start) and will get error code 98. Turn off wait 10 seconds and unplug battery, wait 10 seconds plug back in.

Scootergptx · 06-08-2016, 10:04 AM

Quote:

Originally Posted by Lumberjack

Plug it in turn on bike (don't start) and will get error code 98. Turn off wait 10 seconds and unplug battery, wait 10 seconds plug back in.

Thanks for correcting that.

Something about getting older and my memory.

Lumberjack · 06-08-2016, 10:07 AM

Make sure to wait before unplugging battery

Quote:

Originally Posted by Scootergptx

Thanks for correcting that.

Something about getting older and my memory.

**JD Hog** · 06-08-2016, 01:27 PM

Here is a scan of the instructions I received for my ECU re-flash.

https://www.dropbox.com/s/mk30599z87...tions.jpg?dl=0

notmighty · 06-08-2016, 01:30 PM

Thank you ALL! I didn't have the ECU back from Ivan when I posted earlier today, but FedEx just dropped it off, I have a 16 so I just have to disconnect the battery. Super Excited can't wait to take it for a ride tonight.

Ken Vega · 06-09-2016, 08:23 AM

Quote:

Originally Posted by notmighty

Thank you ALL! I didn't have the ECU back from Ivan when I posted earlier today, but FedEx just dropped it off, I have a 16 so I just have to disconnect the battery. Super Excited can't wait to take it for a ride tonight.

You are going to love it. Wish this was around before all my trials and errors with the EJK and PCV

Erilflynn · 06-09-2016, 09:23 AM

Quote:

Originally Posted by notmighty

Thank you ALL! I didn't have the ECU back from Ivan when I posted earlier today, but FedEx just dropped it off, I have a 16 so I just have to disconnect the battery. Super Excited can't wait to take it for a ride tonight.

And the 02 Sensor

hlknvlcn60 · 06-09-2016, 09:10 PM

Really....had Ivan's posts and tunes been available sooner, I too would have saved some good scratch on worthless fuel tuners. It is hindsight now and no regrets.....love the way the big Vulcan runs and as it should.

notmighty · 06-10-2016, 08:50 AM

Quote:

Originally Posted by Ken Vega

You are going to love it. Wish this was around before all my trials and errors with the EJK and PCV

Ya I feel for those that went with the tuners, I did that on my Yamaha stryker as Ivan didn't offer anything for them. Once he did I jumped on it, sold my EJK and never looked back. I rode my vaquero straight home and pulled the ECU out, I even made a step by step youTube video.

terryd · 06-10-2016, 09:55 AM

Quote:

Originally Posted by notmighty

Ya I feel for those that went with the tuners, I did that on my Yamaha stryker as Ivan didn't offer anything for them. Once he did I jumped on it, sold my EJK and never looked back. I rode my vaquero straight home and pulled the ECU out, I even made a step by step youTube video.

Hey, that video will be helpful to people who haven't done this yet. Hope you post it.

notmighty · 06-10-2016, 01:33 PM

here is the link:

06-08-2016, 09:02 AM	#499
Scootergptx Advanced Member Join Date: Sep 2015 Location: Grand Prairie, TX Posts: 654	Did you get the instruction page with the ECU? I don't recall having to do anything before putting it back in. You do have to unhook the battery. I'd have to check to be sure on which terminal. Someone with a better memory may know that offhand. Install the ECU, hook the battery back up, then turn the key on (don't start it) for a few seconds for the system to recognize the ECU. __________________ 2011 Vaquero V&H slip ons Roaring Toyz intake PCV (removed) Ivan's ECU flash
	0

06-08-2016, 09:57 AM	#500
Lumberjack Advanced Member Join Date: Sep 2015 Posts: 542	Plug it in turn on bike (don't start) and will get error code 98. Turn off wait 10 seconds and unplug battery, wait 10 seconds plug back in. Login or Register to Remove Ads
	0

06-08-2016, 01:27 PM	#503
JD Hog Join Date: Mar 2014 Location: Placerville, CA Posts: 2,946	Here is a scan of the instructions I received for my ECU re-flash. https://www.dropbox.com/s/mk30599z87...tions.jpg?dl=0 __________________ Jim Diebolt 2015 Vulcan 1700 Voyager ABS The Black Kaw 2005 Vulcan Nomad Sold 2006 Honda 1800 VTX (Freebie) Sold 2008 Harley Ultra Classic Sold 2001 Harley Ultra Classic Sold Hangtown, Kalifornia VBA #2625
	0

06-09-2016, 09:10 PM	#507
hlknvlcn60 Advanced Member Join Date: Jun 2014 Location: crooked river ranch oregon Posts: 723	Really....had Ivan's posts and tunes been available sooner, I too would have saved some good scratch on worthless fuel tuners. It is hindsight now and no regrets.....love the way the big Vulcan runs and as it should. __________________ 2012 Vaquero S.E. Chuckster's tear drop intake, Freedom true dual racing exhaust, Ivan flash, Clearview windscreen, Corbin gunfighter seat, Clockwerk's hugger style front fender, Kawasaki KQR backrest and luggage rack, kuryakyn iso grips and rear passenger boards, front highway pegs, revolutionspeed clutch and primary covers and reservoir and switch box covers and Kuryakyn skeleton rearview mirrors.
	0

06-08-2016, 01:30 PM	#504
notmighty Member Join Date: May 2016 Posts: 202	Thank you ALL! I didn't have the ECU back from Ivan when I posted earlier today, but FedEx just dropped it off, I have a 16 so I just have to disconnect the battery. Super Excited can't wait to take it for a ride tonight.
	0

06-10-2016, 01:33 PM	#510
notmighty Member Join Date: May 2016 Posts: 202	here is the link:
	0