Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > 1500 & 1600 Nomad

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 04-22-2024, 05:55 PM   #3
BigRiig   BigRiig is offline
Jr. Member
 
BigRiig's Avatar
 
Join Date: Oct 2015
Location: Northern California
Posts: 31
Ok so y'all can disregard this. I fixed it!

Good thing I still have contact with the previous owner. It turns out that he installed a relay to add air horns. He ended up removing the air horns since they were a bit too much. He reinstalled a stock-style horn that was louder but never removed the relay.

When I replaced the battery last year, I inadvertently connected both relay wires to ground. This meant that the horn button would trigger the relay but no power was being sent to the horn. I just removed the relay and spliced the original wires back together and, BOOM, I now have a horn.
 
Reply With Quote
 





Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.