Techlusion TFi FI-2050ST

dlauffenburger · 09-13-2010, 08:47 AM

I have been reading a lot of posts IRT adding the TFi and am thinking abut the upgrade, but would like your inputs:

- Does the upgrade make much of a difference on a 09 NOMAD 1700 if i am running the standard pipes and air cleaner?

- Does adding it effect the warranty?

- How do you set the pots if you do not have a Tach?

Thanks for any info.

Dave

redjay · 11-27-2011, 07:04 PM

Did you get a processor for the bike and did it make any difference ?

UNCLE WILLIE · 06-16-2015, 03:48 PM

2010 nomad stock got real hot real fast in hot weather
added dobeck fi2050st adjusted #1 pot @ 1800 rpm to best lean run & cooled it off really well later added chaps from the Canadian co. air-something and that helps too way to tell without guage just note how often the fan runs also check around the rad. heads. crank case with thermometer [infrared]

I only use the #1 pot to richen the low end up to @ 3000 rpm and it does not take as much as recommended im set less than 1:00 @3/4 if to rich u get slight stumble off idle u can adjust as often as needed until its right their directions are easy to follow esp. if u are used to engine/fuel repair

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Techlusion TFI Warranty	Cajunrider	Vulcan Nomad/Vaquero/Voyager	6	06-17-2015 05:19 PM
Just put a Techlusion TFI on my bike, a discussion	slomo	1500 & 1600 Nomad	12	07-18-2011 03:02 PM
Dobeck Techlusion TFI fuel processor	scott2007nomad	Vulcan Nomad/Vaquero/Voyager	6	05-03-2010 09:54 PM
techlusion tfi installation	kudzufarmer	1500 & 1600 Nomad	5	10-26-2009 05:57 AM
Techlusion TFI & Cost	rooster1	Vulcan Nomad/Vaquero/Voyager	11	12-31-2008 06:46 PM

09-13-2010, 08:47 AM	#1
dlauffenburger Jr. Member Join Date: Sep 2010 Posts: 2	Techlusion TFi FI-2050ST I have been reading a lot of posts IRT adding the TFi and am thinking abut the upgrade, but would like your inputs: - Does the upgrade make much of a difference on a 09 NOMAD 1700 if i am running the standard pipes and air cleaner? - Does adding it effect the warranty? - How do you set the pots if you do not have a Tach? Thanks for any info. Dave Login or Register to Remove Ads
	0

11-27-2011, 07:04 PM	#2
redjay Top Contributor Join Date: Feb 2008 Location: Ontario Posts: 6,927	Did you get a processor for the bike and did it make any difference ?
	0

06-16-2015, 03:48 PM	#3
UNCLE WILLIE Member Join Date: Jun 2015 Location: knoxville tn Posts: 227	2010 nomad stock got real hot real fast in hot weather added dobeck fi2050st adjusted #1 pot @ 1800 rpm to best lean run & cooled it off really well later added chaps from the Canadian co. air-something and that helps too way to tell without guage just note how often the fan runs also check around the rad. heads. crank case with thermometer [infrared] I only use the #1 pot to richen the low end up to @ 3000 rpm and it does not take as much as recommended im set less than 1:00 @3/4 if to rich u get slight stumble off idle u can adjust as often as needed until its right their directions are easy to follow esp. if u are used to engine/fuel repair
	0