|
|
09-05-2016, 08:55 PM
|
#1 |
|
Member
Join Date: Aug 2014
Location: Joplin, Mo
Posts: 70
|
2010 Nomad No turn signal or flashers
So sometime while out today the turn signals stopped working. Doing a search and reading the forum they only mention the relay. I have no front or rear signal but when I turn on a signal I here a clicking and assume that's the relay could it still be bad ?
Login or Register to Remove Ads |
|
|
09-05-2016, 11:34 PM
|
#2 |
|
Advanced Member
Join Date: Oct 2013
Location: Stockton, Ca.
Posts: 568
|
[QUOTE=houndawg;669460]So sometime while out today the turn signals stopped working. Doing a search and reading the forum they only mention the relay. I have no front or rear signal but when I turn on a signal I here a clicking and assume that's the relay could it still be bad ?[/QUOTE
Yes it still could be bad. Check the fuses first. Use a meter to verify the power is getting through the fuse. The relay has power in and ground out for the relay to work. There will be power in and power out for the lights. There should be a small schematic on the back of the flasher that will help identify the terminals and what they do. They can have numbered terminals to identify each location. If they don't get a schematic to identify the wires and what they do. All of these electrical connections can corrode so make sure the connections are clean and tight. 
__________________
Too much fun Is never enough. You make a living by what you get, You make a life by what you give. The measure of a man can be summed up by how he treats people who are the least significant to him. |
|
|
Linear Mode
