For Sale

dabull · 08-28-2009, 01:26 PM

1 set of slightly used baffles

Drilled and out in 10 minutes.

BEFORE

AFTER

Cobra FI200r is next....

blowndodge · 08-28-2009, 01:36 PM

Just Say No! to Baffles!!

dabull · 08-28-2009, 01:48 PM

question about the cleanup grinding....

i have put the grinder to the inside of the cut...angled on the outside to sensire it was smooth. Whne it comes to cleaning the rear end of the exhaust prior to painting, should i gring off ALL the black? or just clean it well then paint over the entire tip?

cactusjack · 08-28-2009, 02:24 PM

Quote:

Originally Posted by DaBull

question about the cleanup grinding....

i have put the grinder to the inside of the cut...angled on the outside to sensire it was smooth. Whne it comes to cleaning the rear end of the exhaust prior to painting, should i gring off ALL the black? or just clean it well then paint over the entire tip?

Just paint it.

phenrichs · 08-28-2009, 02:33 PM

put some tape around the outside to cover the chrome and paint it. Use a good paint I would also recommend giving it plenty of time to dry and set before running it so you don't have to smell it. I just use a small wire wheel on my dremel to clean out the chunks and sprayed it.

dabull · 08-28-2009, 02:48 PM

will just paint it:) Cobra FI now istalled with green light....ready to gas and go----go get paint that is :)

trosco · 08-28-2009, 03:46 PM

Derry, i bought small can of hi temp satin black engine paint for 3.99 from walmart. Knocked the burrs off where cut was done with a file, gave both tips a shot of spray carb cleaner and wipe with old underware, then wet both down on end and inside pipe with paint, imed. wiped overspray off chrome edge on tip and it was done in 10 minutes and dry in another15.
Set you cobra to 3 / 5 / 0 if no intake mods, use 3.25 / 5.25 / 0.25 if intake openned up.

billz410 · 08-28-2009, 03:51 PM

Those baffles come with the towel?

dabull · 08-28-2009, 03:52 PM

Quote:

Originally Posted by trosco

Derry, i bought small can of hi temp satin black engine paint for 3.99 from walmart. Knocked the burrs off where cut was done with a file, gave both tips a shot of spray carb cleaner and wipe with old underware, then wet both down on end and inside pipe with paint, imed. wiped overspray off chrome edge on tip and it was done in 10 minutes and dry in another15.
Set you cobra to 3 / 5 / 0 if no intake mods, use 3.25 / 5.25 / 0.25 if intake openned up.

took a wet cloth and cleaned the tips...have tape and hi-heat spray paint (guess I'll tape off a bit more than just the pipes;)

Cobra set at 3/5/0, no air mods....

thanks for the help gang!

ccmjr77 · 08-28-2009, 04:27 PM

I didn't even paint mine. Now you can not tell anyway.

audiogooroo · 08-28-2009, 04:54 PM

Quote:

Originally Posted by DaBull

1 set of slightly used baffles

Drilled and out in 10 minutes.

BEFORE

AFTER

Cobra FI200r is next....

I love how the sun is shining brighter in the "after" clip. :)

dogdoc · 08-28-2009, 08:32 PM

throw in a case of BudLite and I might consider the baffles which I would ship back to bd. :-)

dabull · 08-29-2009, 06:18 PM

300+ mile trip today with the new debaffled mufflers -

Survey says: LOVED THENEW RUMBLE!! ALL GEARS.

08-28-2009, 01:26 PM	#1
dabull Sr. Member Join Date: Oct 2008 Location: Crestview, FL Posts: 2,409	For Sale 1 set of slightly used baffles Drilled and out in 10 minutes. BEFORE AFTER Cobra FI200r is next.... Login or Register to Remove Ads
	0

08-28-2009, 01:36 PM	#2
blowndodge Sr. Contributor Join Date: Jul 2007 Location: Washington City, Utah Posts: 16,474	For Sale Just Say No! to Baffles!! __________________ I love my Victory Cross Country Tour 106. Smells like Victory! Ultra's are Limited There are two types of Harley riders. Those that trailer them and those that push them. The most Interesting Man in the World "Find the things in life you don't do well and don't do those things" Member # 0005
	0

08-28-2009, 01:48 PM	#3
dabull Sr. Member Join Date: Oct 2008 Location: Crestview, FL Posts: 2,409	For Sale question about the cleanup grinding.... i have put the grinder to the inside of the cut...angled on the outside to sensire it was smooth. Whne it comes to cleaning the rear end of the exhaust prior to painting, should i gring off ALL the black? or just clean it well then paint over the entire tip?
	0

08-28-2009, 02:33 PM	#5
phenrichs Sr. Member Join Date: Jun 2008 Location: Sioux Falls, SD Posts: 2,498	For Sale put some tape around the outside to cover the chrome and paint it. Use a good paint I would also recommend giving it plenty of time to dry and set before running it so you don't have to smell it. I just use a small wire wheel on my dremel to clean out the chunks and sprayed it. Login or Register to Remove Ads
	0

08-28-2009, 02:48 PM	#6
dabull Sr. Member Join Date: Oct 2008 Location: Crestview, FL Posts: 2,409	For Sale will just paint it:) Cobra FI now istalled with green light....ready to gas and go----go get paint that is :)
	0

08-28-2009, 03:46 PM	#7
trosco Sr. Member Join Date: Feb 2008 Location: Charlotte, NC Posts: 1,464	For Sale Derry, i bought small can of hi temp satin black engine paint for 3.99 from walmart. Knocked the burrs off where cut was done with a file, gave both tips a shot of spray carb cleaner and wipe with old underware, then wet both down on end and inside pipe with paint, imed. wiped overspray off chrome edge on tip and it was done in 10 minutes and dry in another15. Set you cobra to 3 / 5 / 0 if no intake mods, use 3.25 / 5.25 / 0.25 if intake openned up. __________________ trosco: just call me Ross 2007 Black & Titanium Nomad (Nomad made 65K but got replaced 2014) 2010 Titanium Goldwing 2014 KLR 650 New Edition
	0

08-28-2009, 03:51 PM	#8
billz410 Advanced Member Join Date: Nov 2008 Location: Dodgeville, WI COLD!!! Posts: 550	For Sale Those baffles come with the towel?
	0

08-28-2009, 04:27 PM	#10
ccmjr77 Advanced Member Join Date: Aug 2007 Location: Anthem, AZ Posts: 642	For Sale I didn't even paint mine. Now you can not tell anyway. __________________ ccmjr77 2007 Kawasaki Nomad 1600
	0

08-28-2009, 08:32 PM	#12
dogdoc Top Contributor Join Date: Jul 2007 Posts: 5,263	For Sale throw in a case of BudLite and I might consider the baffles which I would ship back to bd. :-)
	0

08-29-2009, 06:18 PM	#13
dabull Sr. Member Join Date: Oct 2008 Location: Crestview, FL Posts: 2,409	For Sale 300+ mile trip today with the new debaffled mufflers - Survey says: LOVED THENEW RUMBLE!! ALL GEARS.
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
For Sale	csguru	Parts & Accessories	1	03-28-2010 06:03 PM
for sale	rickmeister56	Parts & Accessories	5	07-30-2009 05:45 PM
99 for sale	bbbbbb911	Complete Bikes	0	07-29-2009 02:23 AM
For sale in UK	trevwales	Parts & Accessories	0	06-04-2009 12:31 PM
07 For Sale	misunderstood	Complete Bikes	1	04-10-2008 07:33 PM