Luggage Rack?

[radco]

Who has the Scootworks luggage rack or has made their own?
I have the templae for the side mount brackets but I do not know the space between the 2 to make the top plate,, and I still have 2 ft of snow around the shed,, I would like to cut all the metal and either chrome it or powder coat it before spring,, Im still out of work for at least 4/6 weeks or when the Doc says i can go back,,so I have alot of extra time .THANKs Rich

[VulcanE]

Radco, are you asking about the rack you mount a trunk on, like the wompus rack (witch scootworks sells)? I could get the dimensions off mine, but mine is a 1600, and I think they're different.

[cactusjack]

Rich,

Since your picture shows your bike with a luggage rack, I will assume you are referring to a rack to mount a trunk on? The Scootworks rack is a Wompus rack.

[phenrichs]

I am fabricating mine using tubes that will bolt in place of the stock backrest so that those nice grab bars remain in place. I will then form the "grid" of steel that the trunk will bolt to (rubber mounted of course). I will then weld in an angled gusset on each side for extra stability. Check out this discussion I had with Master Mac http://kawanow.proboards77.com/index...ad=8271&page=1

[radco]

I am going to get rid of my back rest and rack , and install a trunk,, Idaho sent me a template of the side rails of the one he made,, So the Wompas or Scootworks one should be the same width between the rails..........THANKs I need a winter project.. Ill still be out of work at least a month.depending on what the Doc says next month........so Ill sand my trunk and get it ready for paint,, and get the rack done,,,,Rich

[radco]

Originally Posted by OP

I am fabricating mine using tubes that will bolt in place of the stock backrest so that those nice grab bars remain in place. I will then form the "grid" of steel that the trunk will bolt to (rubber mounted of course). I will then weld in an angled gusset on each side for extra stability. Check out this discussion I had with Master Mac http://kawanow.proboards77.com/index...ad=8271&page=1

THANKs another option... Thanks for link,,,Rich

[coacha]

I have a wompas on my 1500 if you need dimensions.

[schoeney]

Rich. I may be interested in buying your old luggage rack. PM sent.

Greg

[phot]

I made my own rack based on the Scootworks, and mounted the Scootworks Trunk/Backrest/Chrome Rack. I was sad to loose the stock passenger grab rails so made my own from polished stainless steel to replace them and was pleased with the result.

[radco]

Originally Posted by schoeney

Rich. I may be interested in buying your old luggage rack. PM sent.

Greg

GREG If I do the rack,, which I sure I will,, Ill give a shout,,, BUT keep a eye open ,,I will post a pic of the new one befor I sell,, I may need a reminder LOL. I saved your PM message.............Rich

[skimo]

Radco

Terrebone did a one back in October using the existing a brackets

http://kawanow.proboards77.com/index...ad=7424&page=1

[Bdog]

Its about time more fabricators at kawanow started some projects...good to see guys..Bdog

[tokyobilly]

Radco, I have a Scootworks rack for a 1500 Nomad, I'll sell for $200.00 shipping included.
E-mail me at juboquiren@hotmail.com

[tomm]

Hi,
Just bought the luggage rack and trunk from Scootworks for a 1600, but haven't installed it yet. Between 13-15/16th and 14 inches between the side rails (inside) where they join the plate, depending on where I measure (front / middle / back.)
Tom

[radco]

Originally Posted by tomm

Hi,
Just bought the luggage rack and trunk from Scootworks for a 1600, but haven't installed it yet. Between 13-15/16th and 14 inches between the side rails (inside) where they join the plate, depending on where I measure (front / middle / back.)
Tom

Tom Thanks for the post.. I am also going to do a 1600 rack,, what is the space from left to right for the Top of the rack?? Basicly LxW I have the template for a 1600 Side Rails,, just need the top .....Thanks Rich