RacnRay Throttle mod

[RACNRAY]

Originally Posted by Monkeyman

I think it's just for the FBW ('09+) bikes. On the older bikes (1600s at least), you can just tighten the throttle cables. I have zero slack in my cables and the response is as crisp as it's going to be on a Nomad.

I have performed this mod for MANY Nomads, matter of fact the first customer that had this mod done is local here in South Florida and owns a Nomad. His results were documented here and on another forum, matter of fact he started the "throttle modification" thread!
The Nomads respond well to this mod as it has the same delay programmed into the ECU as the other Vulcans. Zero slack in the cables does NOT alter the ratio of grip rotation to throttle plate operation.

RACNRAY

[dmyers]

That could be
We did it to shorten the throttle turn it was a cheap 1/4 turn throttle.

[jp58]

If you remove the cover to the throttle plates on the FBW 1700 and run the engine with stock throttle. The plates do not open right away when you turn the throttle. That is the lag and the jerkyness you get at part throttle. Racnrays mod fixes that. The plates open right away as soon as you twist the throttle. You cannot adjust the stock throttle to remove the lag. You need this mod.

[rickyboy]

and you get this where????

[jestephens]

Originally Posted by rickyboy

and you get this where????

The mod is done to the throttle grip itself, so if you have any inclination of changing out the stock grips, do it at the same time. I bought some Avon air cushions from Ray and he modified the throttle grip before shipping them out. A one stop shop!
Ray will chime in as he always does, but here's his info:

HEY GUYS...

I have been gettin enuff requests for my quick turn throttle mod for the 1600/1700/2000 Vulcans that i have decided to produce these and offer them for sale.

I checked Kawi's part numbers and my mod fits ALL years 1700 and 2000 Vulcans and 2008 1600 Nomad. There may be other Vulcans this mod will fit, i will have to have samples to see. The OEM Kawi part # for the grip is 46019-1109 so please double check the part nmbr for your skoot. This mod IS APPLICABLE to Kuryakyn AND avon grips. If you are considering changing grips at the same time i can supply your choice of grips already modified. Let me know and i can supply pricing. This mod can be performed on Kuryakyn and Avon grips.


ANYWAYS....i have one stock throttle in stock already modded, and i'll try to have at least one more ready to go. I will be setting up an ordering process as follows...

You send me your throttle tube/grip, i will mod it and send it back, cost will be $59.00 PLUS the cost of ground shipping via USPS to the 50 states only. I only ship via usps due to convienence, but they have already lost 2 throttle grips. I suggest that you ship your grip and i will only be shipping back via "insured and signature required".

If you DO NOT want your skoot down waiting for the throttle, then you can order a tube from me. I will ship it out asap, you will then ship your tube to me. A core charge" will be charged in the amount of $47.00 in addition to the $59.00 at the time of order (this is to cover my cost in replacing the tube if i don't get one back). When i recieve your GOOD USABLE grip back i will credit back your card $42.00 ($47.00 less $5.00 service charge).

If i recieve a damaged core that i cannot use, then i will not be able to refund the core charge.If I don't reieve a grip back in 15 days, there will be an additional $5.00 service charge. If I DO NOT recieve a grip back in 30 days, the core charge is forfeited.

SO...i hope i have not confused anyone as i felt it was necessary to offer two types of ordering. Any one wanting quicker than ground service will be charged accordingly.

This is a simple mod to perform, some mechanical experience is necessary for proper installation, i will be glad to offer technical support over the phone. No other mods are needed, no tuning ,etc. Acceleration will be improved, especially in the lower rpm/throttle position areas.

I hope this pm finds everyone well and hungry for more MOJO, I was very happy with the improvement on my skoot.

You may call me directly at the shop...954-455-9665,
Tue-Fri 9-6:30 (closed for lunch 2-3 pm) and Sat 9-3 all day, Florida time.

VISA,M/C,DISCOVER,AM/EX accepted.

THANX ALL
RACNRAY

[cnc]

OK, I'm confused. I thought this mod was for Fly by wire bikes only, But Ray mentions the 2008 Nomad as well, which is cable.

[jp58]

Originally Posted by cnc

OK, I'm confused. I thought this mod was for Fly by wire bikes only, But Ray mentions the 2008 Nomad as well, which is cable.

They are all cable driven. Even the 1700 FBW has 2 cables to the throttle body, we will say left side. From there it drives an electronic servo motor on the right side of the throtle body. That opens the throtle plates. The mod fixes the 1700 lag the computor gives. From what ray says it will give the 1600 and 2000 a quicker throttle turn. Not really fixing a lag just a quick turn response.

[sacarriker]

And how much does this mod cost?

[jp58]

Originally Posted by sacarriker

And how much does this mod cost?

I think it was around $65.00 shiped. You provide the throttle and send it to him.

[Jackag]

There are others that do the same mod, for less.

[RACNRAY]

Originally Posted by Jackag

There are others that do the same mod, for less.

To make that statement without proof is erroneous. Frst, I am sure not you or them have
seen my mod and how it is made; are the materials used the same, is the machining/final design the same? Have they offered support and taken the time to post specific instructions on removal/installation/adjustment as I have ?

Unlike you I can't and won't make such a blanket statement comparing my mod to someone else's unless i have seen, inspected and tried their modification. Then and ONLY then would i be knowledgeable enough to offer my experience.

Maybe you can post some testimonials relaying the experiences others are having with the other mods available.

Until you have proof due to a direct and un-biased comparison there is something that is the same/better/cheaper it's not wise to offer info making that kind of statement.

THANX
RACNRAY

[glwilson]

Originally Posted by Jackag

There are others that do the same mod, for less.

Are you serious with your comment?

You are on a site that a fellow member is making what appears to be a good product... backed by an increasing number of testimonials and you make an asinine statement like this? And then add contact information without any backing of what the hell your guy makes.

I have never been accused of having tact... but I think you have me beat...

[sacarriker]

Cant find pricing or even a site that offers the mod for sale.

[jp58]

Originally Posted by sacarriker

Cant find pricing or even a site that offers the mod for sale.

Racnray's price is on the vulcanforums.com Go to the 1700 page and click on throttle modification. All info is there. Lots of pages to read.

[sacarriker]

Originally Posted by jp58

Racnray's price is on the vulcanforums.com Go to the 1700 page and click on throttle modification. All info is there. Lots of pages to read.

Great thanks!