|
04-18-2009, 09:45 AM | #1 |
Join Date: Mar 2009
Location: Greeley, Colorado
Posts: 6,772
|
Does anyone know if these risers will fit?
Will either of these risers fit a 1600 Nomad?
http://cgi.ebay.com/ebaymotors/Kawas...rkparms=65%3A2|39%3A1|240%3A1318 http://cgi.ebay.com/ebaymotors/Yamah...rkparms=65%3A2|39%3A1|240%3A1318 I know that these particular risers are made for 7/8" bars, but the seller also has 1". My real question is if the pullback is going to be an issue? Thanks in advance!
__________________
Jared
VBA #1051 (Former President) Login or Register to Remove Ads |
|
04-18-2009, 10:03 AM | #2 |
Sr. Member
Join Date: Jul 2007
Location: Chesapeake, Ohio
Posts: 1,537
|
Does anyone know if these risers will fit?
Don't be surprised if you dont have to replace cables with those risers. Aeromach makes a 4-1/2" and chuckster makes some too those are your 2 best bets unless you eant to change lines and cables. Also look into the scootworks and Phatt II's. All those are ones you keep stock cables with, I do believe.
__________________
|
|
04-18-2009, 03:20 PM | #3 |
Join Date: Mar 2009
Location: Greeley, Colorado
Posts: 6,772
|
Does anyone know if these risers will fit?
I don't want to swap the cables.
Anyone with hands on experience with these? To me, they look very similar in size to the aeromach risers, but half the price. If these don't work, I'll probably end up machining my own set.
__________________
Jared
VBA #1051 (Former President) |
|
04-18-2009, 05:31 PM | #4 |
Sr. Member
Join Date: Mar 2009
Posts: 1,200
|
Does anyone know if these risers will fit?
Unless I am reading the auction wrong, these will not fit.
<blockquote>Fitment: All Honda, Kawasaki, Yamaha cruisers with 7/8" bar diameter</blockquote> The Nomad has 1" bars.
__________________
Cory 2013 Honda GL1800 Goldwing 2008 Kawasaki KLR 650 (for sale) 2007 Honda ST1300 (sold) 2005 Kawasaki Nomad (sold) 2004 Suzuki Hayabusa (sold) http://www.strobel.ws VBA #01021 VROC #29389 |
|
04-18-2009, 05:44 PM | #5 | |
Join Date: Mar 2009
Location: Greeley, Colorado
Posts: 6,772
|
Does anyone know if these risers will fit?
Quote:
I'm only concerned with the risers hitting the back of the speedo housing.
__________________
Jared
VBA #1051 (Former President) Login or Register to Remove Ads |
|
|
04-18-2009, 05:45 PM | #6 |
Sr. Member
Join Date: Mar 2009
Posts: 1,200
|
Does anyone know if these risers will fit?
Sorry, missed that in the original... :-[
What I can add though is that the Aeromach come very close on the Nomad to the speedo cowling, if these are at all different they likely will hit.
__________________
Cory 2013 Honda GL1800 Goldwing 2008 Kawasaki KLR 650 (for sale) 2007 Honda ST1300 (sold) 2005 Kawasaki Nomad (sold) 2004 Suzuki Hayabusa (sold) http://www.strobel.ws VBA #01021 VROC #29389 |
|
04-18-2009, 06:56 PM | #7 |
Join Date: Jul 2007
Location: Peoples Republic of New York State
Posts: 15,154
|
Does anyone know if these risers will fit?
Judging from the pic I would say they will fit.
The pull back doesn't look as as far back as the Phat 2's I have and mine just touch my speedo bezel at full lock. That being said, with the 5 1/2" rise I think you will have to change your cables. At the very least you will have to re-route them.
__________________
Tim "TC" Conley VBA #9 2011 Victory Kingpin mine 2013 Victory Boardwalk -hers [LEFT][COLOR=#000000] [SIZE=4] |
|
04-18-2009, 07:39 PM | #8 |
Join Date: Mar 2009
Location: Greeley, Colorado
Posts: 6,772
|
Does anyone know if these risers will fit?
The Phat 2s touch the speedo housing? I didn't know that.....
__________________
Jared
VBA #1051 (Former President) |
|
04-18-2009, 08:10 PM | #9 |
Join Date: Jul 2007
Location: Peoples Republic of New York State
Posts: 15,154
|
Does anyone know if these risers will fit?
They are not supposed to. They come with two mounting holes. One will give you more pull back than the other. I installed mine for the most pull back I could get. Therefore they just touch the bezel at full lock. Not a problem for me.
__________________
Tim "TC" Conley VBA #9 2011 Victory Kingpin mine 2013 Victory Boardwalk -hers [LEFT][COLOR=#000000] [SIZE=4] |
|
04-18-2009, 08:50 PM | #10 |
Join Date: Mar 2009
Location: Greeley, Colorado
Posts: 6,772
|
Does anyone know if these risers will fit?
Oh, that makes sense.
__________________
Jared
VBA #1051 (Former President) |
|
04-18-2009, 11:50 PM | #11 |
Join Date: Mar 2009
Location: Greeley, Colorado
Posts: 6,772
|
Does anyone know if these risers will fit?
I could just drill and tap another hole....right?
__________________
Jared
VBA #1051 (Former President) |
|
04-19-2009, 12:25 PM | #12 |
Member
Join Date: Oct 2007
Location: Hollister, CA
Posts: 158
|
Does anyone know if these risers will fit?
Those risers hit my speedo big time on my 1500. Went with Phat IIs using the offset hole.
|
|
04-19-2009, 05:38 PM | #13 |
Top Contributor
Join Date: Jul 2007
Posts: 5,263
|
Does anyone know if these risers will fit?
when you install them, just swing the handlebars left-right. if you end up with a dent in each side of the nacelle(like Beezer) then it don't fit. you must aquit. :-)
|
|
04-19-2009, 07:54 PM | #14 |
Join Date: Nov 2007
Location: Gowrie, IA
Posts: 803
|
Does anyone know if these risers will fit?
With the Phat II's, you might loosen the speedo housing, then push it rearward as far as it will go (not much), then tighten the housing back down while applying the rearward pressure. I don't have any problem with the Phat II's hitting the housing. They were easy to install too. (My bike is an '06.) BnG
__________________
Dave Mills AKA BiscuitsNGravy 2006 Vulcan Nomad "BiscuitsNGravy" Kawanow #150 Vietnam @ Jan67-Jan68 Retired USAF Patriot Guard Riders/American Legion #431 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Will Barons tach fit with PhatII risers?? | creed | Vulcan Nomad/Vaquero/Voyager | 8 | 08-26-2009 05:44 AM |
Will it fit? | dennisbailey | Vulcan Nomad/Vaquero/Voyager | 3 | 06-07-2009 12:31 AM |
Will these fit ?? | Jared | Vulcan Nomad/Vaquero/Voyager | 9 | 03-24-2009 09:43 PM |
Do these risers fit? | samkjr | 1500 & 1600 Nomad | 6 | 09-21-2008 06:30 PM |
Will H-D Chrome Lowers Fit? | superduty | Vulcan Nomad/Vaquero/Voyager | 5 | 08-14-2008 11:04 PM |