|
02-01-2021, 08:11 AM | #1 |
Jr. Member
Join Date: Jan 2019
Location: Ontario, Canada
Posts: 11
|
Signal Module Replacement
Just curious, but has anyone found a plug and play or Quasi plug and play signal module that will work with an LED conversion and KEEPS the auto cancelling feature?
I'm Looking for something that will work with the original signal module wires. Also, do the New cruisers use factory LED or incandescent and if they use LED can those modules be retrofitted to the older bikes? 03 VN1500fi L4 Login or Register to Remove Ads |
|
02-01-2021, 12:57 PM | #2 |
Member
Join Date: Feb 2016
Location: Nova Scotia
Posts: 405
|
Wasn't their a mod where you could add a resistor to the actual flasher module so you didn't lose the cancelling feature?
I looked and couldn't find it......Mike
__________________
'09 Voyager |
|
02-01-2021, 02:40 PM | #3 |
Jr. Member
Join Date: Jan 2019
Location: Ontario, Canada
Posts: 11
|
If you want to use the original module with a full led change then yes, you can add Load resistors to the circuit along with diodes for the dash light and it will work fine. The resistors tend to get warm so placement is important. I am looking to get away from resistors and go to a digital module and keep the auto cancel. There are a few aftermarket modules that autocancel, however they want your left leg in price. I was just curious if anyone has found a plug and play one. The original module uses a timer of 8 seconds and then a distance count from the speed sensor for 65 meters and it is a relay module and not digital so there is no easy way to wire around it.
|
|
02-19-2021, 05:08 PM | #4 |
Advanced Member
Join Date: Aug 2012
Location: Morrow, Ga.
Posts: 830
|
__________________
02 1500 Nomad (07 1600 Motor) 160,000 Red & Black 12" mini apes Galfer lines (6' over) EJK Dobeck Reckless Fairing. Led H4 headlight All LED lights Rockford Fosgate radio |
|