|
|
|
|
|
Thread Tools | Search this Thread | Display Modes |
|
05-24-2015, 08:59 PM | #1 |
Member
Join Date: Jan 2012
Location: Concord, NC
Posts: 406
|
Full Replacement LED Headlight for Voyager/Vaquero in Under an Hour
I tackled the LED headlight today and it is SUPER simple to install so I thought I would do a quick write up. You will have to cut 2 tabs off of the mounting plate of the OE headlight assembly so this will not be reversible without sourcing a new headlight bracket.
I used a J.W. Speaker 8700 Evolution 2 Headlight: http://www.jwspeaker.com/products/le...0-evolution-2/ This is the updated model with better side dispersion properties, these are American made and of superior quality; knockoffs can be had cheaper and there are other name brands as well such as Truck Lite, etc. I'm just familiar with J.W. from the 4X4 community and I prefer the look. J.W. offers a universal trim ring which I used: http://www.jwspeaker.com/products/le...ion-2/3156351/ To install: 1. Remove headlight shroud by removing one allen bolt directly under the headlight and gently tugging on the assembly to release top two posts. 2. Remove headlight assembly (4 bolts and the plug) 3. Completely disassemble headlight assembly until you are left with the black ring in the pic below. 4. There are three tabs on the OE bracket, you must remove the ones at the 3 O'clock and 9 O'clock position; the other is fine to stay. 5. Remove the tab at the 6 O'clock position on the J.W. Speaker bracket as it will interfere with the tab that secures your headlight shroud on the OE bracket. 6. Install headlight into J.W. bracket and then install headlight and J.W. bracket into factory bracket using OE trim ring. *Note* At this point I used some nuts and bolts I had handy to install the OE trim ring rather than reusing the factory push pin fasteners, for this reason I had to slightly enlarge the holes on the fairing when reinstalling; choose a smaller nut and bolt if you don't wish to increase the diameter of the holes. 7. Plug in headlight, reinstall factory bracket with factory hardware and reinstall the headlight shroud. 8. Pimp your new headlight!! Finished pics are in 3rd post; could only attach 5 to this one...
__________________
'11 Vaquero '00 Nomad 1500fi - Sold - '92 Vulcan BUBF 1500 Bobber -Sold - VBA Member # 02057 Login or Register to Remove Ads
Last edited by xlock; 05-24-2015 at 11:50 PM.
|
|
05-24-2015, 09:03 PM | #2 |
Sr. Member
Join Date: Mar 2012
Location: Orleans, ON, Canada
Posts: 1,162
|
Do you retain the adjustability of the light? or is it fixed in place.
__________________
Smokey Capt(retd) Canadian Forces National President CVFR (Canadian Veteran Freedom Riders) 2010 VN1700 Voyager, ABS www.cvfr.ca VBA #02220 |
|
05-24-2015, 09:06 PM | #3 |
Member
Join Date: Jan 2012
Location: Concord, NC
Posts: 406
|
Finished Product
Maxed out on pics above; here's the rest...
__________________
'11 Vaquero '00 Nomad 1500fi - Sold - '92 Vulcan BUBF 1500 Bobber -Sold - VBA Member # 02057 |
|
04-09-2017, 08:25 AM | #4 |
Member
Join Date: May 2013
Location: Ottawa Ontario
Posts: 78
|
|
|
04-10-2017, 07:11 PM | #6 |
Join Date: Nov 2012
Posts: 21
|
|
|
04-11-2017, 10:31 AM | #7 |
Advanced Member
Join Date: Sep 2015
Posts: 542
|
Can you confirm which H8 bulb you used?
https://www.superbrightleds.com/more...ink/3933/8569/ https://www.superbrightleds.com/more...ed-tower/1274/ |
|
04-11-2017, 07:26 PM | #8 |
Join Date: Nov 2012
Posts: 21
|
I used the first one, kit comes as a pair,
https://www.superbrightleds.com/moreinfo/led-headlight-bulbs-conversion-kits/led-headlight-kit-h8-led-headlight-bulbs-conversion-kit-with-compact-heat-sink/3933/8569/ |
|
05-24-2015, 09:07 PM | #9 |
Member
Join Date: Jan 2012
Location: Concord, NC
Posts: 406
|
It's 100% adjustable...it's mounted in a proper, full function ring which is then attached to the bike using the plate of the OE assembly.
__________________
'11 Vaquero '00 Nomad 1500fi - Sold - '92 Vulcan BUBF 1500 Bobber -Sold - VBA Member # 02057
Last edited by xlock; 05-24-2015 at 10:05 PM.
|
|
05-25-2015, 04:39 PM | #10 |
Advanced Member
Join Date: Apr 2014
Location: N.C.
Posts: 727
|
that looks good . is it priced like hd's daymaker?
|
|
05-25-2015, 10:04 PM | #11 |
Member
Join Date: Jan 2012
Location: Concord, NC
Posts: 406
|
J.W. Speaker actually makes the Day Maker for Harley...I'm not sure if there are any spec differences or it just amounts to a logo. The 8700 Evolution 2 is their top of the line light at the moment and it's around $300. I think I paid about $50 for the bracket.
__________________
'11 Vaquero '00 Nomad 1500fi - Sold - '92 Vulcan BUBF 1500 Bobber -Sold - VBA Member # 02057 |
|
05-26-2015, 06:57 AM | #12 |
Advanced Member
Join Date: Apr 2014
Location: N.C.
Posts: 727
|
That's not to awful bad. so not a big deal to install huh!
wiring is really not a strong suit for me but it looks to be plug and play after you trim the bracket no big deal. thanks for posting xlock enjoyed the pics looks great SKULLSHAKER |
|
11-04-2015, 08:22 PM | #13 | |
Jr. Member
Join Date: Jun 2015
Location: Virginia Beach
Posts: 1
|
Quote:
I like what you did with the headlight, in fact I am going to do the same thing. Have you thought about installing the JW Speaker Fog Lights? Maybe model 6045? I'm trying to figure out how I can get those on the bike as well.
__________________
Vance and Hines Exhaust Vulcan Nomad Backrest 10" Wind Vest Windshield
Last edited by tpattison; 11-04-2015 at 08:25 PM.
|
|
|
05-26-2015, 09:00 AM | #14 |
Jr. Member
Join Date: Jun 2014
Posts: 37
|
thanks for the write-up and multitude of pics!
|
|
05-26-2015, 06:18 PM | #15 |
Member
Join Date: Jan 2012
Location: Concord, NC
Posts: 406
|
Thanks gents! Just let me know if I can help further.
__________________
'11 Vaquero '00 Nomad 1500fi - Sold - '92 Vulcan BUBF 1500 Bobber -Sold - VBA Member # 02057 |
|