Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Riding > Rallies & Rides > 2018 CanadaEast/Northeast U.S. Rally

Reply
 
Thread Tools Search this Thread Display Modes
Old 07-24-2018, 05:02 PM   #1
Patriot   Patriot is offline
Member
 
Patriot's Avatar
 
Join Date: Jul 2013
Posts: 167
Pissed Baddeck Rally That Just Keeps Giving

So far prior to leaving for Baddeck I flushed my gas tank and lines. Replaced the Fuel Filter and Fuel Pump. On the ride I had spark issue, felt it was the battery. So even though the battery was only a couple years old, swopped it out in North Sydney. Then continued with everyone enjoying ridding the island. On my way home from my overnight in Truro, the voltage meter on the bike started to fluctuate between 12.6V to 11.8V not good. Turning everything off not needed made no difference.
Just retuned from having the Stator tested, there lied the problem. The Stator connector to the rear of the Duel Stators was melted and burnt. So "New Duel Stators And Connectors" are ordered, and should be here by ( I hope ) Friday.
One very good battery thrown away. But the good side, I was able to still ride with my " VERY GOOD FRIENDS ". So it was worth the price of a battery to do so, " NO REGRETS ".
If you are looking for bike parts at reasonable prices check out this web site. They have both Canadian and American decisions.

rmstator.com (be sure you're on the correct site for where you are)



Login or Register to Remove Ads
 
Reply With Quote
Old 07-24-2018, 05:34 PM   #2
Badger: Black Hills   Badger: Black Hills is offline
 
Badger: Black Hills's Avatar
 
Join Date: Mar 2009
Location: Black Hills, SD
Posts: 200
Quote:
Originally Posted by Patriot View Post
So far prior to leaving for Baddeck I flushed my gas tank and lines. Replaced the Fuel Filter and Fuel Pump. On the ride I had spark issue, felt it was the battery. So even though the battery was only a couple years old, swopped it out in North Sydney. Then continued with everyone enjoying ridding the island. On my way home from my overnight in Truro, the voltage meter on the bike started to fluctuate between 12.6V to 11.8V not good. Turning everything off not needed made no difference.
Just retuned from having the Stator tested, there lied the problem. The Stator connector to the rear of the Duel Stators was melted and burnt. So "New Duel Stators And Connectors" are ordered, and should be here by ( I hope ) Friday.
One very good battery thrown away. But the good side, I was able to still ride with my " VERY GOOD FRIENDS ". So it was worth the price of a battery to do so, " NO REGRETS ".
If you are looking for bike parts at reasonable prices check out this web site. They have both Canadian and American decisions.

rmstator.com (be sure you're on the correct site for where you are)


Glad you were able to ride with every one. Based on past experience I would forgo the connectors and just hard wire the stator. I have had those connectors melt twice now. Make sure it is a good, well-sautered (if that's how you spell it) splice.
__________________
2009 National, Custer, SD
2010 NW Regional, Kalispell, MT
2011 National, Maggie Valley, NC
2011 Rally in the Redwoods, CA
2013 National, Estes Park, CO
2013 SE Regional, Blairsville, GA
2014 NW Regional, Orifino, ID
2014 NC/SC Regional in the Ozarks, AR
2016 NC Regional, Hillsboro, WI
2016 E. Canada/NE Regional, Quebec
2017 National, Lake George, NY
2018 SC/NC, Custer, SD
2018 Antlers, OK
 
Reply With Quote
Old 07-24-2018, 05:55 PM   #3
plumber63   plumber63 is offline
 
plumber63's Avatar
 
Join Date: Apr 2012
Location: NE Indiana
Posts: 997
Noel Its spelled "Soldered"
__________________
Troy Donat
VBA #02401
2015 Voyager
2006 1600 Nomad black(sold)

2016 Salem, Antlers,
2017 Eureka Springs, Lake George, Antlers
2018 Custer NR, Antlers
 
Reply With Quote
Old 07-26-2018, 12:57 PM   #4
Badger: Black Hills   Badger: Black Hills is offline
 
Badger: Black Hills's Avatar
 
Join Date: Mar 2009
Location: Black Hills, SD
Posts: 200
Quote:
Originally Posted by plumber63 View Post
Noel Its spelled "Soldered"
Thank you!
__________________
2009 National, Custer, SD
2010 NW Regional, Kalispell, MT
2011 National, Maggie Valley, NC
2011 Rally in the Redwoods, CA
2013 National, Estes Park, CO
2013 SE Regional, Blairsville, GA
2014 NW Regional, Orifino, ID
2014 NC/SC Regional in the Ozarks, AR
2016 NC Regional, Hillsboro, WI
2016 E. Canada/NE Regional, Quebec
2017 National, Lake George, NY
2018 SC/NC, Custer, SD
2018 Antlers, OK
 
Reply With Quote
Old 07-26-2018, 03:40 PM   #5
cnc   cnc is offline
 
cnc's Avatar
 
Join Date: May 2009
Location: Montreal QC
Posts: 12,034
Quote:
Originally Posted by plumber63 View Post
Noel Its spelled "Soldered"
Quote:
Originally Posted by Badger: Black Hills View Post
Thank you!
Troy there is an apostrophe between the T and the S!
Actually we don’t care about grammar or spelling in the North East section, so long as you post.
__________________

Norm Ward
2008 blue / silver nomad
kawanow / VBA #01136



Login or Register to Remove Ads
 
Reply With Quote
Old 07-27-2018, 08:43 PM   #6
plumber63   plumber63 is offline
 
plumber63's Avatar
 
Join Date: Apr 2012
Location: NE Indiana
Posts: 997
Quote:
Originally Posted by cnc View Post
Troy there is an apostrophe between the T and the S!
Actually we don’t care about grammar or spelling in the North East section, so long as you post.
I don't care either, but he kinda asked about how it was spelled.
__________________
Troy Donat
VBA #02401
2015 Voyager
2006 1600 Nomad black(sold)

2016 Salem, Antlers,
2017 Eureka Springs, Lake George, Antlers
2018 Custer NR, Antlers
 
Reply With Quote
Old 07-27-2018, 09:15 PM   #7
cnc   cnc is offline
 
cnc's Avatar
 
Join Date: May 2009
Location: Montreal QC
Posts: 12,034
Quote:
Originally Posted by plumber63 View Post
I don't care either, but he kinda asked about how it was spelled.
Yeah l know, just busting chops!
__________________

Norm Ward
2008 blue / silver nomad
kawanow / VBA #01136
 
Reply With Quote
Old 07-29-2018, 11:30 PM   #8
Badger: Black Hills   Badger: Black Hills is offline
 
Badger: Black Hills's Avatar
 
Join Date: Mar 2009
Location: Black Hills, SD
Posts: 200
Quote:
Originally Posted by plumber63 View Post
I don't care either, but he kinda asked about how it was spelled.
And I appreciated the help!
Noel
__________________
2009 National, Custer, SD
2010 NW Regional, Kalispell, MT
2011 National, Maggie Valley, NC
2011 Rally in the Redwoods, CA
2013 National, Estes Park, CO
2013 SE Regional, Blairsville, GA
2014 NW Regional, Orifino, ID
2014 NC/SC Regional in the Ozarks, AR
2016 NC Regional, Hillsboro, WI
2016 E. Canada/NE Regional, Quebec
2017 National, Lake George, NY
2018 SC/NC, Custer, SD
2018 Antlers, OK
 
Reply With Quote
Old 07-24-2018, 07:20 PM   #9
cnc   cnc is offline
 
cnc's Avatar
 
Join Date: May 2009
Location: Montreal QC
Posts: 12,034
A multi meter would have been handy on the trip to see what was going on. Your stator (s) were obviously putting out power when Mike boosted you Pete, having said that I wouldn’t have missed the chance to test my crash gear!
__________________

Norm Ward
2008 blue / silver nomad
kawanow / VBA #01136
 
Reply With Quote
Old 07-24-2018, 08:20 PM   #10
Patriot   Patriot is offline
Member
 
Patriot's Avatar
 
Join Date: Jul 2013
Posts: 167
Quote:
Originally Posted by cnc View Post
A multi meter would have been handy on the trip to see what was going on. Your stator (s) were obviously putting out power when Mike boosted you Pete, having said that I wouldn’t have missed the chance to test my crash gear!
The problem was intermittent, hardly noticeable. Just seemed like a bad battery. From Truro home, once the bike got good and hot is when the problem became very noticeable. Phoned my machanic Monday morning, he advised me to have the Stator tested. If it passed then change out the Voltage Regulator. Didn't need to go that far. Once the cover was removed, the problem was quite visible.
I look at it this way, I was able to enjoy the rally and make it home after. I'll be back on the road in no time.
" SO! NEWFOUNDLAND NEXT ?"
 
Reply With Quote
Old 07-24-2018, 11:07 PM   #11
Sabre-t   Sabre-t is offline
 
Sabre-t's Avatar
 
Join Date: May 2015
Location: Marietta, GA
Posts: 838
Quote:
Originally Posted by Patriot View Post
The problem was intermittent, hardly noticeable. Just seemed like a bad battery. From Truro home, once the bike got good and hot is when the problem became very noticeable. Phoned my machanic Monday morning, he advised me to have the Stator tested. If it passed then change out the Voltage Regulator. Didn't need to go that far. Once the cover was removed, the problem was quite visible.
I look at it this way, I was able to enjoy the rally and make it home after. I'll be back on the road in no time.
" SO! NEWFOUNDLAND NEXT ?"
You should still get the stator and R/R tested. It's an easy test. Noel is right, though, solder the wires and skip the connectors.
 
Reply With Quote
Old 07-26-2018, 08:57 AM   #12
Patriot   Patriot is offline
Member
 
Patriot's Avatar
 
Join Date: Jul 2013
Posts: 167
Quote:
Originally Posted by Sabre-t View Post
You should still get the stator and R/R tested. It's an easy test. Noel is right, though, solder the wires and skip the connectors.
The inner stater was fried, amazed I was able to get home. As I'm changing one, I feel it best to swop out both. Which is recommended anyway. Had a tail /indicator light out yesterday (was checking the bike over, post trip), so changed them both. I save the good one for an emergency.
 
Reply With Quote
Old 07-24-2018, 09:12 PM   #13
cnc   cnc is offline
 
cnc's Avatar
 
Join Date: May 2009
Location: Montreal QC
Posts: 12,034
Speak to Cindy, Newfoundland was her idea.
__________________

Norm Ward
2008 blue / silver nomad
kawanow / VBA #01136
 
Reply With Quote
Old 07-26-2018, 08:47 AM   #14
Patriot   Patriot is offline
Member
 
Patriot's Avatar
 
Join Date: Jul 2013
Posts: 167
Received the battery booster in the mail today. It is now fully charged, manual read, and ready to Putin my side bag. I may never need it but someone may.
 
Reply With Quote
Old 07-26-2018, 10:09 AM   #15
cnc   cnc is offline
 
cnc's Avatar
 
Join Date: May 2009
Location: Montreal QC
Posts: 12,034
Good to hear you got to the bottom of things Pete, as for your indicator light burning out, I think you wore it out at the Tremblant rally!
__________________

Norm Ward
2008 blue / silver nomad
kawanow / VBA #01136
 
Reply With Quote
Reply





Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.