|
|
10-22-2012, 01:10 PM | #1 |
Member
Join Date: May 2012
Location: Hernando, FL
Posts: 197
|
Air Filter
Does anybody know if this http://www.ebay.com/itm/370659109635...84.m1423.l2649 might fit on a 1600? Even if I had to make som modifications to it I could handle it. Are the throttle bodies much different between the VN200 and the VN1600? I just like the look of it because it is different from most others I have seen. Any info or advice would be appreciated.
Login or Register to Remove Ads |
|
10-22-2012, 05:30 PM | #2 |
Sr. Contributor
Join Date: Apr 2008
Location: Tamworth New Hampster 06 1600
Posts: 12,484
|
I don't know seek out MAS he might know.....
__________________
06 1600 Nomad Just call me Mac molon labe come and get it |
|
10-22-2012, 09:54 PM | #3 |
Advanced Member
Join Date: Mar 2008
Location: Deer Park, TX
Posts: 513
|
Comparing the amount of material around the intake holes it looks like it will be too tall to fit under the gas tank.
|
|
10-23-2012, 12:26 AM | #4 |
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
I'm not sure if it will fit either, perhaps someone with a V2K could give you a couple measurements.
__________________
2002 Nomad aka Bountyhunter VBA #27 VROC #18951 |
|
10-23-2012, 02:55 PM | #5 |
Sr. Member
Join Date: Feb 2008
Location: Charlotte, NC
Posts: 1,464
|
You would have to make your own backing plate (not hard, I did for my 6 inch set up) and move the holes for Throttle bodies as close to the top as you can with out undercutting the filter element and it would fit then cause there is no curve to the element.
But the VN2000 cylinders are considerably taller than the 15/1600 Nomad's. I think you'd find that cover/filter would be overly large in appearance on the Nomad.
__________________
trosco: just call me Ross 2007 Black & Titanium Nomad (Nomad made 65K but got replaced 2014) 2010 Titanium Goldwing 2014 KLR 650 New Edition Login or Register to Remove Ads |
|