|
|
04-12-2014, 12:57 PM | #1 |
Sr. Member
Join Date: Jul 2013
Location: Mesa Az
Posts: 1,400
|
Ideas on checking rear wheel alignment?
This came up in another thread and I thought I would throw it out there in an attempt to get some ideas. Occasionally I get the overwhelming feeling my '05 1600 is not tracking straight. It feels like the rear end is pushing slightly to the right I have even consider putting a sheet metal or aluminum spacer in between the final drive and swingarm housing connection to bump the wheel slightly CCW (looking down from the top).
The first thing to do would be to take some sort of measurement to confirm the wheel is not straight. Anybody have any ideas on how a guy might go about doing this? BTW...I've noticed this long before I did the Harley front wheel mod.
__________________
---------------------------------------------------------------------------------------------------------------------------------------------------------------- '05 1600CL. Originator 18" Harley wheel mod, Dobeck TFI, True Duals, Mutazu hardbags, Flanders handlebars n' a bunch more. Sometimes I miss the good ol' days but most times I'm just glad I survived them Login or Register to Remove Ads |
|
04-12-2014, 02:48 PM | #2 |
Sr. Member
Join Date: Mar 2012
Location: Belgrade, MT
Posts: 2,824
|
So are you saying that you think the top of the wheel is out of alignment vetically with the bottom ? Or like the camber on a car?
__________________
Dave "(dshelly)" Shellenberger 2014 Harley Ultra Classic 2007 1600 Nomad (Black) Shellenberger Machine Belgrade, MT Various Bagger Member (Harley Chapter) VBA # 2395 |
|
04-12-2014, 06:24 PM | #3 |
Sr. Member
Join Date: Jul 2013
Location: Mesa Az
Posts: 1,400
|
No. Front to back. I was giving your pole idea (different thread) some thought. I could rig up one of those easy with some 1/2 inch conduit and a piece of all thread. Next tire change I may just do dat.
__________________
---------------------------------------------------------------------------------------------------------------------------------------------------------------- '05 1600CL. Originator 18" Harley wheel mod, Dobeck TFI, True Duals, Mutazu hardbags, Flanders handlebars n' a bunch more. Sometimes I miss the good ol' days but most times I'm just glad I survived them |
|
04-12-2014, 06:32 PM | #4 |
Top Contributor
Join Date: Feb 2008
Location: Ontario
Posts: 6,978
|
With the handlebars in the straight ahead position get a long straight edge and hold it against the rear tire (front to back). Get another person to measure from the straight edge to the front tire. Do the same thing on the other side of the bike. Measurement should be the same.
|
|
04-12-2014, 06:35 PM | #5 | |
Sr. Member
Join Date: Jul 2013
Location: Mesa Az
Posts: 1,400
|
Quote:
__________________
---------------------------------------------------------------------------------------------------------------------------------------------------------------- '05 1600CL. Originator 18" Harley wheel mod, Dobeck TFI, True Duals, Mutazu hardbags, Flanders handlebars n' a bunch more. Sometimes I miss the good ol' days but most times I'm just glad I survived them Login or Register to Remove Ads |
|
|
04-12-2014, 08:03 PM | #6 |
Join Date: May 2009
Location: Montreal QC
Posts: 12,034
|
With regard to what you copied from the other thread. Interesting but how did he determine if the front wheel was positioned dead straight? If it was off even by a few degrees, it would make the measurement with the string useless.
A long straight edge might work but if the front and rear tires are of different widths it also may induce some error. Maybe two straight edges, one on each side?
__________________
Norm Ward 2008 blue / silver nomad kawanow / VBA #01136 |
|
04-13-2014, 12:18 PM | #7 | |
Sr. Member
Join Date: Jul 2013
Location: Mesa Az
Posts: 1,400
|
Quote:
But how do you know the bike is perfectly straight?
__________________
---------------------------------------------------------------------------------------------------------------------------------------------------------------- '05 1600CL. Originator 18" Harley wheel mod, Dobeck TFI, True Duals, Mutazu hardbags, Flanders handlebars n' a bunch more. Sometimes I miss the good ol' days but most times I'm just glad I survived them |
|
|
04-13-2014, 01:35 PM | #8 | |
Join Date: May 2009
Location: Montreal QC
Posts: 12,034
|
Quote:
I'm thinking a laser level.might be useful, not the short little kind, I have one that is about 18in long. If the bike is dead upright and the front wheel were removed then this might work well. Position the bike facing a wall, actually the further back the better as any misalignment will show more the further away. Maybe 10 feet. If you could find and mark two points under the frame that are dead center, rad and swing arm area, you could lay the straight edge of the level along this line with the laser on. Have a helper mark the exact laser spot on the wall with a marker. Draw a level line horizontally about a foot in each direction where this mark is. Next lay the level along one side of the rear tire bringing the level up or down till the laser rests on this horizontal line, again mark the spot. Next lay the level along the other side of the tire bringing the laser up or down to rest on the line, mark that spot. You now have 3 marks along a horizontal line, measure the distance between each outer mark to the center mark and you should be able to see any mid alignment and which way to go to correct.
__________________
Norm Ward 2008 blue / silver nomad kawanow / VBA #01136 |
|
|
04-14-2014, 02:57 PM | #9 | |
Member
Join Date: Jun 2013
Location: Charlotte, NC
Posts: 81
|
Quote:
A true alignment plate for motorcycles sets the bike on it's side and they take measurements based of the frame. This also tells them if the frame is straight.
__________________
2005 Nomad 1600 |
|
|
04-14-2014, 08:56 PM | #10 |
Join Date: May 2009
Location: Montreal QC
Posts: 12,034
|
Guess I didn't see any reference to it being the rear wheel he taped the string to and when the explanation said he stretched the string from the back of the wheel to the center of the swing arm pivot well again I assumed since doing that on the rear wheel would mean the string bending around the wheel, he was some how doing it off the front.
__________________
Norm Ward 2008 blue / silver nomad kawanow / VBA #01136 |
|
04-12-2014, 08:07 PM | #11 |
Top Contributor
Join Date: Feb 2008
Location: Ontario
Posts: 6,978
|
Different width tires front and back should make no difference when using a straight edge.
It is the measurement to the front tire from the straight edge you are interested in. |
|
04-12-2014, 08:19 PM | #12 |
Join Date: May 2009
Location: Montreal QC
Posts: 12,034
|
I disagree, put the straight edge and lay it parallel to the rear tire, if the front wheel is turned even one degree from straight ahead, your reading will be off and make the rear wheel appear out of line. I'm thinking with one down each side, measurement on both sides will confirm if any misalignment is the result of the rear wheel or the front wheel slightly turned.
__________________
Norm Ward 2008 blue / silver nomad kawanow / VBA #01136 |
|
04-13-2014, 10:07 AM | #13 |
Join Date: Oct 2013
Location: chandler okla
Posts: 854
|
I would think something more like finding two points on each side of the frame cradle around the rear mounts and measure to the center of the rear axle on each side .Should tell You if the rear wheel is tracking with Bike .Just a thought .
|
|
04-13-2014, 11:08 AM | #14 |
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
I'd check for sideplay in the swingarm, mine had about a 1/8" gap which I shimmed to make it stop moving back and forth.
__________________
2002 Nomad aka Bountyhunter VBA #27 VROC #18951 |
|
04-13-2014, 12:21 PM | #15 |
Sr. Member
Join Date: Jul 2013
Location: Mesa Az
Posts: 1,400
|
It has been 24K since the last swingarm service. I intend to grease the bearings again my next tire change and will check it again.
__________________
---------------------------------------------------------------------------------------------------------------------------------------------------------------- '05 1600CL. Originator 18" Harley wheel mod, Dobeck TFI, True Duals, Mutazu hardbags, Flanders handlebars n' a bunch more. Sometimes I miss the good ol' days but most times I'm just glad I survived them |
|