Judges clutch washers

**ringadingh** · 06-17-2012, 09:25 PM

If you want to try to make your own washers, here are the specs. I made then from a snowmobile driven clutch shim, it was already very close to the size required. I had to file out the center hole a little and sand it a little thinner. These shims come in different thicknesses,and any snowmobile or ATV dealer should have them.

1 pc 2.540 OD X 1.790 ID x .0365 thickness
1 pc 2.540 OD X 1.890 ID x .0365 thickness

06-17-2012, 09:25 PM	#1
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Judges clutch washers If you want to try to make your own washers, here are the specs. I made then from a snowmobile driven clutch shim, it was already very close to the size required. I had to file out the center hole a little and sand it a little thinner. These shims come in different thicknesses,and any snowmobile or ATV dealer should have them. 1 pc 2.540 OD X 1.790 ID x .0365 thickness 1 pc 2.540 OD X 1.890 ID x .0365 thickness __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951 Login or Register to Remove Ads
	0