Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > 1500 & 1600 Nomad

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 06-30-2012, 07:42 PM   #1
Sgt. Country   Sgt. Country is offline
Member
 
Sgt. Country's Avatar
 
Join Date: Mar 2012
Location: Port Richey, FL.
Posts: 195
Waving Gadgets Page does it again

On the 26th I installed a set of V&H Bagger Duals on my 1999 Nomad, I had a lot of popping on decel and when shifting gears . After checking everything, gaskets, leaks, etc. I stated looking at other causes. I found a section in Gadgets Pages about MARBLEING, this was simple I removed the filters and all associated parts and took the hose loose to the air valve, put a marble in and reinstalled the hose. While at it I decided to plug the hoses to the reed valves. The front hose was loose so I put a marbe in and reinstalled the front hose. I found the rear reed valve hose completely off the valve. I put a marble in to plug the hose and reinstalled the hose. Now...NO MORE popping of any kind just the beautiful sound of singing pipes . Everybody have a great evening. Take care, ride safe and God bless.
__________________
Vietnam May '68 till Dec. '69,
Patriot Guard Rider
I ride in memory of the 58,479 brothers and sisters who did not return home.
All Gave Some / Some Gave All
Life should not be a journey to the grave with the intention of arriving safely in an attractive and well preserved body,
But rather to skid in sideways,hotdog in one hand, a beer in the other, body thoroughly used up, totally worn out and yelling.........WOO HOO, WHAT A RIDE!!!!!!!!!!!
VBA# 02002
VROC# 34933



Login or Register to Remove Ads
 
Reply With Quote
 





Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.