Quote:
Originally Posted by HwyRider
Go to an auto parts store or home improvement store and pick up a small roll of 14 gauge wire in red and one in black. Run those back from your lights to your aux fuse panel if you put one in.
If you put a fuse panel in and don't want the items of the fuse panel to come on before the bike is started run a wire from the battery to a relay and then from the relay to the fuse panel. You would trip the relay with whatever circuit you were using that just fried or another one that doesn't come on until the bike starts.
This is the best type of system to use for a fuse panel. After you install the fuse panel you would just connect other items to a positive and negative on the panel.
http://www.amazon.com/Blue-Sea-Syste...sea+fuse+block
|
That's a nice fuse block! I like having the negative bus on it.
Fuse blocks on relays are your friends if you add accessories.