Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > Vulcan Nomad/Vaquero/Voyager

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 08-01-2023, 09:07 PM   #1
andyvh1959   andyvh1959 is offline
Advanced Member
 
andyvh1959's Avatar
 
Join Date: Dec 2017
Location: Green Bay WI
Posts: 768
A VN900 full dresser

I know this is a much smaller Vulcan than we normally see on this forum, but I am quite pleased in my results of heavily modifying a late 70's Pacifico Shadow fairing and Kutter saddlebags, along with a $85 ebay tail trunk, to turn my buddy's VN900 Classic into a full dresser. I think it works well to compliment the lines and paint of the original bike.

I learned TONS about modifying ABS, forming, welding, bonding, even to the point of finding ABS flat stock and pipe/tube that I could cut/form to fit the project. Acetone and ABS plumbing cement are very effective to modify/repair motorcycle plastics. The fairing that I bought on CL for $80 (fairing and Kutter bags) needed a lot of crack repairs, and areas filled in that were hacked to fit speakers. What I learned from this project has led me to a similar Pacifico Shadow project on my own VN1600 Classic, to turn it into a full dresser.
Attached Images
File Type: jpg VN1600 fairing.jpg (33.1 KB, 25 views)
File Type: jpg VN900 TCD 2.jpg (84.3 KB, 30 views)
File Type: jpg VN900 TCD 1.jpg (73.2 KB, 35 views)
__________________
My $1200 Vulcan, to start from.



Login or Register to Remove Ads
Last edited by andyvh1959; 08-01-2023 at 09:17 PM.
 
Reply With Quote
 





Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.