|
02-18-2024, 03:26 PM | #1 |
Jr. Member
Join Date: Nov 2022
Posts: 3
|
Helmet buffet
Replaced my Nomad 1600 windshield a few years ago with a shield that was 2 inches higher than what was on it ( 22 inches if I remember right). It blocked the wind well but sometimes had sun glare and moisture problems since I had to look thru the shield. Measured nose high and cut about 4 inches off of the shield. I can see over the shield and rides nice until I get up to 55 or 60 and then I get helmet shake. I cut a 1 inch gap in the lower part of the windshield and this helped some. Nomad has the stock fork deflectors so I was thinking about making some larger ones to see if that cures the shakes. Stock ones seem sorta small. Anyone ever try this?
Login or Register to Remove Ads |
|