help wiring stebel on 09 Nomad

[paddyo]

Originally Posted by Sin City Stan

I have a drawing around here somewhere if someone wants to see it.

If you can find it or tell me where to find it, I would appreciate it.

[paddyo]

Update/Additional Question:

I pulled the 10 amp fuse for the horn in the fuse box and connected the 85 and 86 posts of the relay to the into the two contact points. When I press the horn button, the stebel sounds but the stock horn does not. It seems like both should sound since the circuit is going through the relay, closing the contact in the relay for the stebel, and continuing on to close the circuit for the stock horn. When I take the relay out of the way and jump the connecters with a piece of wire the stock horn sounds. When I connect the jumper wire to the ends of the wires going to the 85/86 posts of the relay and connect across the fuse, the stock horn sounds but not the stebel. Anyone have any ideas?

[Top Cat]

I have an idea.
Put the stock horn on the shelf and wire it up the way I stated in my first post. ;)

[Sin City Stan]

Originally Posted by paddyo

If you can find it or tell me where to find it, I would appreciate it.

Can't find it. I will draw something up this weekend. Your problem is the combination of a ground being switched by the horn button and the +12V being switched by the relay.

It's an easy fix but not an easy explanation without a picture.

[paddyo]

Thanks Stan. I just figured it out. I will post thread as to how I did it. Thanks again

[egetaseb]

Very useful info here. I will be installing my stebel hourn in a few days.