|
06-17-2012, 08:25 PM | #1 |
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
Judges clutch washers
If you want to try to make your own washers, here are the specs. I made then from a snowmobile driven clutch shim, it was already very close to the size required. I had to file out the center hole a little and sand it a little thinner. These shims come in different thicknesses,and any snowmobile or ATV dealer should have them.
1 pc 2.540 OD X 1.790 ID x .0365 thickness 1 pc 2.540 OD X 1.890 ID x .0365 thickness
__________________
2002 Nomad aka Bountyhunter VBA #27 VROC #18951 Login or Register to Remove Ads |
|