Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > Vulcan Nomad/Vaquero/Voyager

Reply
 
Thread Tools Search this Thread Display Modes
Old 05-24-2015, 08:59 PM   #1
xlock   xlock is offline
Member
 
xlock's Avatar
 
Join Date: Jan 2012
Location: Concord, NC
Posts: 406
Full Replacement LED Headlight for Voyager/Vaquero in Under an Hour

I tackled the LED headlight today and it is SUPER simple to install so I thought I would do a quick write up. You will have to cut 2 tabs off of the mounting plate of the OE headlight assembly so this will not be reversible without sourcing a new headlight bracket.

I used a J.W. Speaker 8700 Evolution 2 Headlight:

http://www.jwspeaker.com/products/le...0-evolution-2/

This is the updated model with better side dispersion properties, these are American made and of superior quality; knockoffs can be had cheaper and there are other name brands as well such as Truck Lite, etc. I'm just familiar with J.W. from the 4X4 community and I prefer the look.

J.W. offers a universal trim ring which I used:

http://www.jwspeaker.com/products/le...ion-2/3156351/

To install:

1. Remove headlight shroud by removing one allen bolt directly under the headlight and gently tugging on the assembly to release top two posts.

2. Remove headlight assembly (4 bolts and the plug)

3. Completely disassemble headlight assembly until you are left with the black ring in the pic below.

4. There are three tabs on the OE bracket, you must remove the ones at the 3 O'clock and 9 O'clock position; the other is fine to stay.

5. Remove the tab at the 6 O'clock position on the J.W. Speaker bracket as it will interfere with the tab that secures your headlight shroud on the OE bracket.

6. Install headlight into J.W. bracket and then install headlight and J.W. bracket into factory bracket using OE trim ring.

*Note* At this point I used some nuts and bolts I had handy to install the OE trim ring rather than reusing the factory push pin fasteners, for this reason I had to slightly enlarge the holes on the fairing when reinstalling; choose a smaller nut and bolt if you don't wish to increase the diameter of the holes.

7. Plug in headlight, reinstall factory bracket with factory hardware and reinstall the headlight shroud.

8. Pimp your new headlight!!

Finished pics are in 3rd post; could only attach 5 to this one...
Attached Images
File Type: jpg vaqhl1.jpg (101.1 KB, 485 views)
File Type: jpg vaqhl2.jpg (99.0 KB, 468 views)
File Type: jpg vaqhl3.jpg (88.5 KB, 464 views)
File Type: jpg vaqhl4.jpg (96.5 KB, 512 views)
File Type: jpg vaqhl5.jpg (97.9 KB, 504 views)
__________________
'11 Vaquero
'00 Nomad 1500fi - Sold -
'92 Vulcan BUBF 1500 Bobber -Sold -

VBA Member # 02057



Login or Register to Remove Ads
Last edited by xlock; 05-24-2015 at 11:50 PM.
 
Reply With Quote
Old 05-24-2015, 09:03 PM   #2
smokey   smokey is offline
Sr. Member
 
smokey's Avatar
 
Join Date: Mar 2012
Location: Orleans, ON, Canada
Posts: 1,162
Do you retain the adjustability of the light? or is it fixed in place.
__________________
Smokey
Capt(retd) Canadian Forces
National President CVFR
(Canadian Veteran Freedom Riders)
2010 VN1700 Voyager, ABS
www.cvfr.ca
VBA #02220
 
Reply With Quote
Old 05-24-2015, 09:06 PM   #3
xlock   xlock is offline
Member
 
xlock's Avatar
 
Join Date: Jan 2012
Location: Concord, NC
Posts: 406
Finished Product

Maxed out on pics above; here's the rest...
Attached Images
File Type: jpg vaqhl6.jpg (99.5 KB, 502 views)
File Type: jpg vaqhl7.jpg (96.6 KB, 486 views)
File Type: jpg vaqhl8.jpg (98.4 KB, 469 views)
__________________
'11 Vaquero
'00 Nomad 1500fi - Sold -
'92 Vulcan BUBF 1500 Bobber -Sold -

VBA Member # 02057
 
Reply With Quote
Old 05-24-2015, 09:07 PM   #4
xlock   xlock is offline
Member
 
xlock's Avatar
 
Join Date: Jan 2012
Location: Concord, NC
Posts: 406
It's 100% adjustable...it's mounted in a proper, full function ring which is then attached to the bike using the plate of the OE assembly.
__________________
'11 Vaquero
'00 Nomad 1500fi - Sold -
'92 Vulcan BUBF 1500 Bobber -Sold -

VBA Member # 02057

Last edited by xlock; 05-24-2015 at 10:05 PM.
 
Reply With Quote
Old 05-25-2015, 04:39 PM   #5
skullbagger   skullbagger is offline
Advanced Member
 
skullbagger's Avatar
 
Join Date: Apr 2014
Location: N.C.
Posts: 727
that looks good . is it priced like hd's daymaker?



Login or Register to Remove Ads
 
Reply With Quote
Old 05-25-2015, 10:04 PM   #6
xlock   xlock is offline
Member
 
xlock's Avatar
 
Join Date: Jan 2012
Location: Concord, NC
Posts: 406
J.W. Speaker actually makes the Day Maker for Harley...I'm not sure if there are any spec differences or it just amounts to a logo. The 8700 Evolution 2 is their top of the line light at the moment and it's around $300. I think I paid about $50 for the bracket.
__________________
'11 Vaquero
'00 Nomad 1500fi - Sold -
'92 Vulcan BUBF 1500 Bobber -Sold -

VBA Member # 02057
 
Reply With Quote
Old 05-26-2015, 06:57 AM   #7
skullbagger   skullbagger is offline
Advanced Member
 
skullbagger's Avatar
 
Join Date: Apr 2014
Location: N.C.
Posts: 727
That's not to awful bad. so not a big deal to install huh!
wiring is really not a strong suit for me but it looks to be plug and play after you trim the bracket no big deal. thanks for posting xlock enjoyed the pics looks great
SKULLSHAKER
 
Reply With Quote
Old 05-26-2015, 09:00 AM   #8
Jester03zx6r   Jester03zx6r is offline
Jr. Member
 
Join Date: Jun 2014
Posts: 37
thanks for the write-up and multitude of pics!
 
Reply With Quote
Old 05-26-2015, 06:18 PM   #9
xlock   xlock is offline
Member
 
xlock's Avatar
 
Join Date: Jan 2012
Location: Concord, NC
Posts: 406
Thanks gents! Just let me know if I can help further.
__________________
'11 Vaquero
'00 Nomad 1500fi - Sold -
'92 Vulcan BUBF 1500 Bobber -Sold -

VBA Member # 02057
 
Reply With Quote
Old 05-26-2015, 10:45 PM   #10
robj   robj is offline
Member
 
Join Date: Jul 2012
Location: St Louis
Posts: 64
looks great
 
Reply With Quote
Old 05-27-2015, 12:40 AM   #11
Duc796canada   Duc796canada is offline
Member
 
Join Date: Mar 2015
Location: Ontario Canada
Posts: 146
Finally!! This what I was looking for, pretty much plug and play. Thanks
__________________
2014 Vaquero SE
Cirius engine guard lights
Vizi-Tec Supa-brake II
Afterburner 4500LM LED headlamp
Ivan's Performance
12 VDC plug-in
BAK Thunder mfg.
Cobra Tri-Flo
2011 Ducati Monster 796
2006 GSXR 600 (track bike)

Last edited by Duc796canada; 05-27-2015 at 12:54 AM.
 
Reply With Quote
Old 06-01-2015, 06:31 PM   #12
hlknvlcn60   hlknvlcn60 is offline
Advanced Member
 
hlknvlcn60's Avatar
 
Join Date: Jun 2014
Location: crooked river ranch oregon
Posts: 723
Awesome looks great.....something I may look at doing someday.
__________________
2012 Vaquero S.E.
Chuckster's tear drop intake, Freedom true dual racing exhaust, Ivan flash, Clearview windscreen, Corbin gunfighter seat, Clockwerk's hugger style front fender, Kawasaki KQR backrest and luggage rack, kuryakyn iso grips and rear passenger boards, front highway pegs, revolutionspeed clutch and primary covers and reservoir and switch box covers and Kuryakyn skeleton rearview mirrors.
 
Reply With Quote
Old 06-04-2015, 07:11 PM   #13
smokey   smokey is offline
Sr. Member
 
smokey's Avatar
 
Join Date: Mar 2012
Location: Orleans, ON, Canada
Posts: 1,162
Just a note that this will not work with the Kuryakin phase 7 as it will not let you use the oem retaining ring, I know because I just tried it, so you will probably only be able to use with the 8700 led light.
__________________
Smokey
Capt(retd) Canadian Forces
National President CVFR
(Canadian Veteran Freedom Riders)
2010 VN1700 Voyager, ABS
www.cvfr.ca
VBA #02220
 
Reply With Quote
Old 06-04-2015, 09:22 PM   #14
xlock   xlock is offline
Member
 
xlock's Avatar
 
Join Date: Jan 2012
Location: Concord, NC
Posts: 406
I used the J.W. Speaker Universal Headlight Bracket/Retaining Ring mated to the OEM assembly...the 8700 wouldn't fit the stock assembly either. Did you use an adaptor ring of any kind? If not I'm sure the same one would work; all the specs for it are in my 2nd link in the first post.
__________________
'11 Vaquero
'00 Nomad 1500fi - Sold -
'92 Vulcan BUBF 1500 Bobber -Sold -

VBA Member # 02057
 
Reply With Quote
Old 06-04-2015, 10:58 PM   #15
smokey   smokey is offline
Sr. Member
 
smokey's Avatar
 
Join Date: Mar 2012
Location: Orleans, ON, Canada
Posts: 1,162
Quote:
Originally Posted by xlock View Post
I used the J.W. Speaker Universal Headlight Bracket/Retaining Ring mated to the OEM assembly...the 8700 wouldn't fit the stock assembly either. Did you use an adaptor ring of any kind? If not I'm sure the same one would work; all the specs for it are in my 2nd link in the first post.
I got the same ring you used, I was hesitant about cutting the two tabs off as once they are off you cannot go back to the stock headlight, good job I dry fitted before as it wouldn't work. Also how did you attach the bracket to the OEM one? or does the retainer ring hold everything in place.
__________________
Smokey
Capt(retd) Canadian Forces
National President CVFR
(Canadian Veteran Freedom Riders)
2010 VN1700 Voyager, ABS
www.cvfr.ca
VBA #02220
 
Reply With Quote
Reply





Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.