Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > 1700 Nomad, Vaquero & Voyager

Reply
 
Thread Tools Search this Thread Display Modes
Old 01-03-2016, 11:28 PM   #1
Joncaudill   Joncaudill is offline
Jr. Member
 
Join Date: Jun 2014
Location: S W Indiana
Posts: 6
In regards to pc5 tweaking

I have a pc5 on my Vaquero and I'm running a pretty nice map from another forum member. I found all kinds of power and drivability improvement with the pc5. I've also modded my throttle tube so i dont have to rotate my arm 720 degrees to find wot. The thing i was lacking was the ability to feather the first 10 percent of throttle at stop or going. It was a real bummer and herky jerky feeling.

I totally stumbled on a not so obvious setting in pc5 software that straight up cured my ail. Its simply the tool to calibrate the tps. Mine was far enough out of whack that the pc5 was seeing zero until i damn near was at 10% of my voltage range. So this might only have been my turd that responded to this but it's at least worth looking at if you have trouble sliding away from a stop buttery smooth with almost no gas.



Login or Register to Remove Ads
 
Reply With Quote
Old 01-04-2016, 01:45 AM   #2
RACNRAY   RACNRAY is offline
Sr. Member
 
RACNRAY's Avatar
 
Join Date: Sep 2011
Location: SOUTH FLORIDA
Posts: 1,210
The tp setting is usually spot on but every now and then I get one that's off. Good thing you got it set right.

RACNRAY
__________________
"TRUE HAPPINESS IS IN THE HEART, NOT IN THE OUTSIDE FIXES"
WITH OVER 46 YEARS AS A MOTORCYCLE TECHNICIAN/HI-PO SHOP OWNER I AM A PURVEYOR OF FACT NOT FICTION!
"WE LIVE OUR LIVES IN CHAINS NEVER KNOWING WE HAD THE KEY"
 
Reply With Quote
Reply





Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.