|
04-15-2017, 12:37 AM | #1 |
Member
Join Date: Oct 2015
Location: Northern Virginia
Posts: 63
|
Swing arm pivot and steering stem bearings
The manual says lube the swing arm pivot and steering stem bearings every 15000 miles. The show that does my regular maintenance quoted a very high price for this (particularly the swing arm), which caused me to consider whether it's really necessary. He told me that for the swing arm alone, it's a 4-5 hour job to take it apart, lube the bearings, and put it back together.
I ride a lot and have 16,500 miles after a year and a quarter. Is it really necessary to "take the entire bike apart" (shop's words) and lube the swing arm at this point? Maybe at 30K instead? Thoughts?
__________________
2011 Nomad (Chuckster's Light Bar, Rac'N Ray's Throttle Mod, Homemade Oversize Lowers, Ivan's ECU Flash, Kawasaki Trunk) 2014 Vulcan 900 Classic LT (sold) 1975 Suzuki GT 185 (first bike) Login or Register to Remove Ads |
|
04-15-2017, 03:57 AM | #2 | |
Advanced Member
Join Date: Oct 2013
Location: Stockton, Ca.
Posts: 568
|
Quote:
__________________
Too much fun Is never enough. You make a living by what you get, You make a life by what you give. The measure of a man can be summed up by how he treats people who are the least significant to him. |
|
|
04-15-2017, 07:38 AM | #3 |
Join Date: Dec 2014
Location: Ontario, Canada
Posts: 305
|
There are a lot of threads that share how when taken apart there wasn't much grease in there from the factory.
If you ride a lot, then consider getting it done when you get your rear tire replaced. Then there is a lot of the disassembly that should be part of the tire replacement cost and not the swing arm service. That is what I did and it helped bring the price down. If it hasn't been done since you got your ride, I would consider getting it done.
__________________
2003 Nomad 1500 Memphis Shades batwing fairing | Chuckster dual plate BAK | Dobeck EJK | Mustang seat | Victory Boardwalk handlebars | Garry's fork brace with modified KLR fork boots |
|
04-15-2017, 08:18 AM | #4 |
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
If its never been done yet, I would definitely take it apart and clean and grease it.Some bikes come from the factory almost dry of grease. Once you know it has sufficient grease you could leave it for 3-4 seasons or more. Ive done mine about three or four times since 2002 and there has always been plenty of grease left inside the swingarm.
__________________
2002 Nomad aka Bountyhunter VBA #27 VROC #18951 |
|
04-15-2017, 09:28 AM | #5 |
Advanced Member
Join Date: Jan 2009
Location: Listowel, Ontario
Posts: 642
|
On a 1700, swingarm lube really is quite a bit of work. Have to remove the saddlebags, exhaust headers and mufflers, rear wheel, rear brake hose, and the pivot shaft to get at the bearings. It would be a good idea to get it done at least once so you know there is lots of grease in there, however the bearings and seals in a 1700 are significantly better (bigger) than previous 1500/1600 bikes and they will go a long time with minimal service. I used to break the needle bearings in my 1600 on a regular basis even tho I lubed them regularly, my 1700 has original bearings and seals without issue. After the initial lube service I grease mine every 100,000 miles.
Steering head should be done more frequently, those delicate little ball bearings are highly loaded.
__________________
Garry 2009 1700 Voyager KACT, sold at 679,465 kms 2011 1700 Nomad Improve handling, suspension and tire life with Garry's Fork Brace. PM for details. Login or Register to Remove Ads |
|
04-15-2017, 08:17 PM | #6 |
Member
Join Date: Mar 2014
Location: Midwest
Posts: 273
|
Save some time
I thought the swingarm was too much work for the first 40K miles. When I got to it, I cut a socket down and welded a piece of flat stock to it. I was then able too remove the swingarm nut without all the exhaust removal headache. Yep -was nearly dry and damaged the shaft and bearings. Now has a grease zerk!
|
|
04-17-2017, 12:36 PM | #7 |
Mega-Contributor
Join Date: Sep 2007
Location: Where it doesn't snow...ever!
Posts: 21,926
|
Removing the swingarm isn't hard, but it is fairly time consuming. When I took mine apart, the bushings were dry. It's not something that has to be done with great frequency, but I would at least do it once because there typically is not a lot of grease from the factory.
__________________
Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08|Custer '09|Cortez '10|Crescent City '11|Kanab '12|Antlers '12|Estes Park '13|Antlers '13|Orofino '14|The Dalles '17 |
|
04-17-2017, 04:13 PM | #8 |
Member
Join Date: May 2016
Posts: 119
|
Bummer. 26000 miles in 4 years & many miles left on Michelins. Looks like I'll spend some time in the garage soon regreasing.
Sent from my SM-G900V using Tapatalk |
|
04-18-2017, 11:07 AM | #9 |
Member
Join Date: Oct 2015
Location: ontario canada
Posts: 94
|
grease fitting
where exactly on the swingarm would you drill and tap for a grease fitting?
__________________
2015 vulcan vaquero ABS SE mettalic carbon grey 12in. windshield grasshopper driver backrest oem aux lights ram mount for gps freedom performance true duals tank bra saddle bag chaps kuryakin longhorn cruise pedals black isso grips chucksters risers k&n air filter ivanized VBA#03256 |
|
04-18-2017, 09:54 PM | #10 | |
Member
Join Date: Mar 2014
Location: Midwest
Posts: 273
|
Quote:
|
|
|