Voyager Fuel Filter - Page 3

The Black Knight · 02-21-2024, 12:03 PM

Quote:

Originally Posted by redjay

Anything that stops fuel flow could cause bogging and a no start condition.

JohnJohn1101 · 02-25-2024, 05:14 PM

Quote:

Originally Posted by redjay

Anything that stops fuel flow could cause bogging and a no start condition.

Well changed that, easy, now it will start with some effort but dies just as its
about to settle at idle?

redjay · 02-25-2024, 07:26 PM

I presume you have tried cleaning the throttle body with carb cleaner and a toothbrush ?
Have you tried some Seafoam or an injector cleaner in the gas ?

These instructions are for a 1500 but apply to the Voyager also.

https://www.vulcanbagger.com/forums/...ad.php?t=15771

JohnJohn1101 · 02-26-2024, 01:45 PM

Quote:

Originally Posted by redjay

I presume you have tried cleaning the throttle body with carb cleaner and a toothbrush ?
Have you tried some Seafoam or an injector cleaner in the gas ?

These instructions are for a 1500 but apply to the Voyager also.

https://www.vulcanbagger.com/forums/...ad.php?t=15771

Yes sir, seafoam a few times a season and did the injector cleaner and did the throttle body. I didn't use a tooth brush but will do so today and report back.
Thanks for your help.

JohnJohn1101 · 02-26-2024, 04:16 PM

Quote:

Originally Posted by JohnJohn1101

Yes sir, seafoam a few times a season and did the injector cleaner and did the throttle body. I didn't use a tooth brush but will do so today and report back.
Thanks for your help.

Still no joy. Tested the coils and they are ok. Next are the plugs but the tool in the oem kit is too small?! Ordered a 18 mm thin wall from Amazon that should show in a couple days.

JohnJohn1101 · 02-26-2024, 04:45 PM

Any insight on error 58? Not finding information on this???

**JD Hog** · 02-26-2024, 05:04 PM

Here is a link for error codes from the shop manual.

https://drive.google.com/file/d/1cHl...ew?usp=sharing

The link should open a .PDF document.

JohnJohn1101 · 02-26-2024, 05:28 PM

Quote:

Originally Posted by JD Hog

Here is a LINK for error codes from the shop manual.

link no worky

JohnJohn1101 · 02-26-2024, 06:55 PM

Well code 58 is ETV and it passed both Shop tests. Shop manual says next step is replacing throttle body. WTF. Any thoughts?

JohnJohn1101 · 03-01-2024, 05:03 PM

Solved, fouled plugs. Friend of a friend of a friend, small town Harley guy mentioned blued pipes and guaranteed me that was it.

JohnJohn1101 · 03-25-2024, 09:35 PM

Pro tip: don't forget too fully seat both injection plugs! Made service appointment out of frustration then noticed the loose connection. Runs fine.

02-25-2024, 07:26 PM	#33
redjay Top Contributor Join Date: Feb 2008 Location: Ontario Posts: 6,982	I presume you have tried cleaning the throttle body with carb cleaner and a toothbrush ? Have you tried some Seafoam or an injector cleaner in the gas ? These instructions are for a 1500 but apply to the Voyager also. https://www.vulcanbagger.com/forums/...ad.php?t=15771 Last edited by redjay; 02-25-2024 at 07:28 PM.
	0

02-26-2024, 05:04 PM	#37
JD Hog Join Date: Mar 2014 Location: Placerville, CA Posts: 2,960	Here is a link for error codes from the shop manual. https://drive.google.com/file/d/1cHl...ew?usp=sharing The link should open a .PDF document. __________________ Jim Diebolt 2015 Vulcan 1700 Voyager ABS The Black Kaw 2005 Vulcan Nomad Sold 2006 Honda 1800 VTX (Freebie) Sold 2008 Harley Ultra Classic Sold 2001 Harley Ultra Classic Sold Hangtown, Kalifornia VBA #2625 Last edited by JD Hog; 02-26-2024 at 06:46 PM. Reason: New link
	0

02-26-2024, 04:45 PM	#36
JohnJohn1101 Jr. Member Join Date: Dec 2023 Location: Central Ohio Posts: 10	Any insight on error 58? Not finding information on this???
	0

02-26-2024, 06:55 PM	#39
JohnJohn1101 Jr. Member Join Date: Dec 2023 Location: Central Ohio Posts: 10	Well code 58 is ETV and it passed both Shop tests. Shop manual says next step is replacing throttle body. WTF. Any thoughts?
	0

03-01-2024, 05:03 PM	#40
JohnJohn1101 Jr. Member Join Date: Dec 2023 Location: Central Ohio Posts: 10	Solved, fouled plugs. Friend of a friend of a friend, small town Harley guy mentioned blued pipes and guaranteed me that was it.
	0

03-25-2024, 09:35 PM	#41
JohnJohn1101 Jr. Member Join Date: Dec 2023 Location: Central Ohio Posts: 10	Pro tip: don't forget too fully seat both injection plugs! Made service appointment out of frustration then noticed the loose connection. Runs fine.
	0