Vulcan Classic 1700 Knocking

[Jono252525]

I have a knocking noise under the tank for quite some time and I found to day that the rubber engine mounts , I think are not wright.
Also the ignition Key silver ring is popping out of it place all the time, I have to push it back in place.
Here some pictures of what I found because I need your expertise.
I cant believe that the engine adjustment went off by themselves.
Look at the front left engine damper,it is 1/8 '' from the bracket and the right damper is squeeze tight on the right bracket.
And the right rear bracket adjustment is nut flush with the frame like the manual said.


I try to upload picture but your system will not load the size of my jpeg or Bitmap or Zip?

[redjay]

Are you the original owner of the bike ? Maybe the engine has been out and not fitted back correctly ?

I fixed the ignition surround rattle by putting an elastic band around it (underneath out of sight).

[Jono252525]

No, I only have it for 2 years and that noise was there from the ferst day.
It look like a big job to replace those rubber mounts and readjust the engine.
The bike had 38,000 Kl when Y got it, now I have 60,000 kl.
It is a 2013 and the engine run fine.


It is to bad that the forum system cannot take my pictures.

[redjay]

Originally Posted by Jono252525

No, I only have it for 2 years and that noise was there from the ferst day.
It look like a big job to replace those rubber mounts and readjust the engine.
The bike had 38,000 Kl when Y got it, now I have 60,000 kl.
It is a 2013 and the engine run fine.


It is to bad that the forum system cannot take my pictures.

Let a dealer take a look for a quote to repair ?