Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > 1700 Nomad, Vaquero & Voyager

Reply
 
Thread Tools Search this Thread Display Modes
Old 05-27-2024, 09:28 PM   #1
Jono252525   Jono252525 is offline
Jr. Member
 
Join Date: Sep 2022
Posts: 2
Vulcan Classic 1700 Knocking

I have a knocking noise under the tank for quite some time and I found to day that the rubber engine mounts , I think are not wright.
Also the ignition Key silver ring is popping out of it place all the time, I have to push it back in place.
Here some pictures of what I found because I need your expertise.
I cant believe that the engine adjustment went off by themselves.
Look at the front left engine damper,it is 1/8 '' from the bracket and the right damper is squeeze tight on the right bracket.
And the right rear bracket adjustment is nut flush with the frame like the manual said.


I try to upload picture but your system will not load the size of my jpeg or Bitmap or Zip?



Login or Register to Remove Ads
Last edited by Jono252525; 05-28-2024 at 12:32 AM.
 
Reply With Quote
Old 05-28-2024, 09:10 AM   #2
redjay   redjay is offline
Top Contributor
 
Join Date: Feb 2008
Location: Ontario
Posts: 6,982
Are you the original owner of the bike ? Maybe the engine has been out and not fitted back correctly ?

I fixed the ignition surround rattle by putting an elastic band around it (underneath out of sight).
 
Reply With Quote
Old 05-28-2024, 05:16 PM   #3
Jono252525   Jono252525 is offline
Jr. Member
 
Join Date: Sep 2022
Posts: 2
No, I only have it for 2 years and that noise was there from the ferst day.
It look like a big job to replace those rubber mounts and readjust the engine.
The bike had 38,000 Kl when Y got it, now I have 60,000 kl.
It is a 2013 and the engine run fine.


It is to bad that the forum system cannot take my pictures.
 
Reply With Quote
Old 05-29-2024, 09:54 AM   #4
redjay   redjay is offline
Top Contributor
 
Join Date: Feb 2008
Location: Ontario
Posts: 6,982
Quote:
Originally Posted by Jono252525 View Post
No, I only have it for 2 years and that noise was there from the ferst day.
It look like a big job to replace those rubber mounts and readjust the engine.
The bike had 38,000 Kl when Y got it, now I have 60,000 kl.
It is a 2013 and the engine run fine.


It is to bad that the forum system cannot take my pictures.
Let a dealer take a look for a quote to repair ?
 
Reply With Quote
Reply

Tags
engine knocking





Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.