Finally put my air horn on... - Page 2

recumbentbob · 11-22-2015, 06:11 PM

Quote:

Originally Posted by JD Hog

It's part bat

May I suggest a Batwing fairing..

Lumberjack · 11-22-2015, 08:41 PM

Your welcome everyone...

Vulcanrider03 · 11-22-2015, 08:44 PM

ahahah oops went wrong here

recumbentbob · 11-22-2015, 08:55 PM

Kick stand on that side of bike. I've never seen that before

Vulcanrider03 · 11-23-2015, 07:13 AM

recumbentbob

As you can see its on a jack for the winter

mattman · 11-24-2015, 07:41 PM

Quote:

Originally Posted by Chuck A.

With these air horns, did you just connect it direstly to your factory horn wires or did you run it through the suggested after market harness and relay? I just purchased a Denali SoundBomb Split Dual-Tone Air Horn.http://www.twistedthrottle.com/denal...-tone-air-horn

The Kuryakyn kit came with a relay that I needed to be used as not to overload the horn button.

shepsvoyager · 11-25-2015, 05:43 AM

Quote:

Originally Posted by captj3

You may want to reconsider keeping the horn in that location. If the front compresses to much it will dent the fender. Don't ask how I know.

+1 Don't ask how I know this either. Who said a 900 pound bike won't wheelie? LOL

NavelJessyn · 09-17-2024, 07:41 AM

Just catching up on this old post—great job with the Wolo install! I had similar fit issues with my setup and found that mounting it under the frame worked best for me too. I used a Bosshorn in a similar spot, and it’s been pretty reliable. Water exposure is definitely something to watch out for, so it’s worth checking the seal from time to time. It’s impressive how much a good horn can improve things; my old one just didn’t cut it.

11-22-2015, 08:44 PM	#18
Vulcanrider03 Advanced Member Join Date: Dec 2011 Location: Rockland,ont Posts: 519	ahahah oops went wrong here __________________ Lukster National CVFR SAA Rockland,Ont Nomad 2010 Voyager trunk Alleycat intake / YVANIZE ECU, Freedom performance 2 into 1 Kuryaken grip with Throttle mod lost of chrome add on Sound digital 1200.4 2 ohm 6 x 9 MPX 690 Hertz in custom fairing 6.5 hcx hertz speakers in hard bags 6.5 MPX hertz in pods
	0

11-22-2015, 08:55 PM	#19
recumbentbob Sr. Member Join Date: Mar 2009 Location: Newburgh IN Posts: 3,404	Kick stand on that side of bike. I've never seen that before __________________ VBA #01084 "A well regulated militia being necessary to the security of a free State, the right of the People to keep and bear arms shall not be infringed."
	0

11-23-2015, 07:13 AM	#20
Vulcanrider03 Advanced Member Join Date: Dec 2011 Location: Rockland,ont Posts: 519	recumbentbob As you can see its on a jack for the winter __________________ Lukster National CVFR SAA Rockland,Ont Nomad 2010 Voyager trunk Alleycat intake / YVANIZE ECU, Freedom performance 2 into 1 Kuryaken grip with Throttle mod lost of chrome add on Sound digital 1200.4 2 ohm 6 x 9 MPX 690 Hertz in custom fairing 6.5 hcx hertz speakers in hard bags 6.5 MPX hertz in pods Login or Register to Remove Ads
	0

09-17-2024, 07:41 AM	#23
NavelJessyn Jr. Member Join Date: Aug 2022 Posts: 2	Just catching up on this old post—great job with the Wolo install! I had similar fit issues with my setup and found that mounting it under the frame worked best for me too. I used a Bosshorn in a similar spot, and it’s been pretty reliable. Water exposure is definitely something to watch out for, so it’s worth checking the seal from time to time. It’s impressive how much a good horn can improve things; my old one just didn’t cut it. Last edited by NavelJessyn; 09-19-2024 at 05:58 AM.
	0