Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > 1700 Nomad, Vaquero & Voyager

Reply
 
Thread Tools Search this Thread Display Modes
Old 09-22-2024, 12:35 AM   #1
Tortuga   Tortuga is offline
Advanced Member
 
Join Date: Mar 2016
Location: Sahuarita, AZ
Posts: 562
Oil Level Check

2014 Nomad 1700 ABS.
Could someone/s please explain the oil check directions logic? If my bike has sat all night, hasen't all the oil that's going drain down drained down? What's the point of warming up a cold bike, letting it drain down a certain amount of time and then checking it? I can just imagine how popular I'd be at the gas station stop with my friends while they wait for me to go through the official procedure. About as happy as a group of woke bikers wait while everyone stands around waiting hours for their electric bikes charge.



Login or Register to Remove Ads
 
Reply With Quote
Old 09-22-2024, 05:05 PM   #2
JD Hog   JD Hog is offline
 
JD Hog's Avatar
 
Join Date: Mar 2014
Location: Placerville, CA
Posts: 2,960
From the Service Manual:

Because of the semi-dry sump lubrication system, the
engine oil level indicated on the dipstick will fluctuate
depending on the motorcycle
__________________
Jim Diebolt
2015 Vulcan 1700 Voyager ABS
The Black Kaw

2005 Vulcan Nomad Sold
2006 Honda 1800 VTX (Freebie) Sold
2008 Harley Ultra Classic Sold
2001 Harley Ultra Classic Sold

Hangtown, Kalifornia



VBA #2625
 
Reply With Quote
Old 10-21-2024, 09:25 PM   #3
DLK   DLK is offline
Jr. Member
 
Join Date: May 2024
Location: Cincinnati
Posts: 9
It is a semi dry sump system. If you let it sit overnight it will all go into the crankcase or trans , I don't remember, and you will be a quart or more low on the dipstick.. Run it, wait 3 minutes check, not a big deal.
 
Reply With Quote
Old 10-23-2024, 01:02 AM   #4
DragonLady58   DragonLady58 is offline
Sr. Member
 
DragonLady58's Avatar
 
Join Date: Jul 2016
Location: Somewhere South of Alaska....
Posts: 2,368
As JD said, diff. bikes are diff. On the Vaquero, let the bike sit for about 35 minutes, all the oil will settle to where its supposed to be.....then check it when the bike is vertical.
Do it the same way everytime. I check it before every ride, then if riding hard for 1/2 day, I'll check it at the gas station when I get a snack and a drink.....


Don't fret about it, unless your 1/2 a quart low, then look to see if its smoking or leaking somewhere.
My bigbore stroked 1500 will jiggle shit loose unless it lock-tited in good....even on my left hand side cases....I've had that bolt fall out that your supposed to take the engine mounts loose and raise the engine up about a inch or so, on the alternators cover....
Damnest thing I ever saw.....theres not enough clearance for it to fall out, unless your really flexing the motor mounts....but that leak was caused by the screw falling out....
I lost the thing for the last time last year, I helicoiled the hole, then lock-tite'ed it in, hasn't come out since....
Don't sweat the small stuff....
__________________

---------------------
Don't start no schit,
there won't be no schit....
*My Sarcasm is directly proportional
to the amount of Stupidity involved*
---------------------
VBA#03239
VROC#37400

VRA
---------------------
2014 Vaquero
2001 Nomad FI
2003 Street Glide (sold)
1500 Meanie, fresh rebuild (sold)
90s BUBF Bobber (sold)
2001 UltraCycle FatPounder (Sold)
1975 HD ElectraGlide (Sold)
1982 Kawasaki Z1 Chopper (Sold)
Suck It Up & Ride!
 
Reply With Quote
Reply





Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.