Drive belt robbery

vvbluerider · 10-08-2024, 01:06 PM

My belt failed at 57,000 miles, lost many teeth so new belt required.

Kawi wants $546 for a new belt....ouch! Beyond ridiculous.

My Harley belt went over 100k miles, FYI.

Has anyone found an aftermarket belt that does not rob all the $$$$ out of your wallet? Apparently Kawi has an iron clad monopoly on this part, bow down to the beast?!?

DaPreacha · 10-08-2024, 02:02 PM

You can look on Ebay for a used one with low miles or check some salvage yards. Several on Ebay for around $200. I have 87000 on mine and will probably replace it at 100,000.

redjay · 10-08-2024, 02:11 PM

https://www.vulcanforums.com/threads...uestion.22802/

Maybe something in the link will be helpful.

Also send a PM to GV550 on this forum. He might be able to help. He has put hundreds of thousands of miles on Voyagers and might know a good source for a replacement belt.

redjay · 10-08-2024, 02:21 PM

https://www.denniskirk.com/belt-driv...prd/020540.sku

How wide is the belt on your Voyager ?

vvbluerider · Yesterday, 05:59 PM

I appreciate everyone's help.

The Dennis Kirk belt measures 1.125" and the Voyager belt measures 1.02 "

Not sure if he Dennis Kirk belt's extra width (only .105") will ride too hard on the rear sprocket belt guard?

My Kawasaki belt runs tight with the rear sprocket guard, which might be ok depending on the wheel alignment? For the slight difference in width and the way more reasonable price I think it is worth trying.

Has anyone else bought one of these belts? Comments are welcome always.

DragonLady58 · Today, 03:48 AM

Recently replaced the belt on my Vaquero, I matched one up with a gates belt. Go to a bonafied gates store, look in their catalog. It fits a grain elevator drive system...
GATES 139T , as per the factory service manual, is helluva lot cheaper, is 40% stronger....wear on mine is great....

https://www.amazon.com/Gates-Strengt...ustomerReviews

10-08-2024, 01:06 PM	#1
vvbluerider Jr. Member Join Date: May 2020 Posts: 41	Drive belt robbery My belt failed at 57,000 miles, lost many teeth so new belt required. Kawi wants $546 for a new belt....ouch! Beyond ridiculous. My Harley belt went over 100k miles, FYI. Has anyone found an aftermarket belt that does not rob all the $$$$ out of your wallet? Apparently Kawi has an iron clad monopoly on this part, bow down to the beast?!? Login or Register to Remove Ads
	0

10-08-2024, 02:02 PM	#2
DaPreacha Member Join Date: Aug 2017 Location: Rockingham, NC Posts: 77	You can look on Ebay for a used one with low miles or check some salvage yards. Several on Ebay for around $200. I have 87000 on mine and will probably replace it at 100,000. __________________ Da Preacha 2012 Nomad Went to the darkside Ivan's flash and lots of other stuff "God is good even when we aren't!!"
	0

10-08-2024, 02:11 PM	#3
redjay Top Contributor Join Date: Feb 2008 Location: Ontario Posts: 6,981	https://www.vulcanforums.com/threads...uestion.22802/ Maybe something in the link will be helpful. Also send a PM to GV550 on this forum. He might be able to help. He has put hundreds of thousands of miles on Voyagers and might know a good source for a replacement belt. Last edited by redjay; 10-08-2024 at 02:14 PM.
	0

Yesterday, 05:59 PM	#5
vvbluerider Jr. Member Join Date: May 2020 Posts: 41	I appreciate everyone's help. The Dennis Kirk belt measures 1.125" and the Voyager belt measures 1.02 " Not sure if he Dennis Kirk belt's extra width (only .105") will ride too hard on the rear sprocket belt guard? My Kawasaki belt runs tight with the rear sprocket guard, which might be ok depending on the wheel alignment? For the slight difference in width and the way more reasonable price I think it is worth trying. Has anyone else bought one of these belts? Comments are welcome always. Login or Register to Remove Ads
	0

Today, 03:48 AM	#6
DragonLady58 Sr. Member Join Date: Jul 2016 Location: Somewhere South of Alaska.... Posts: 2,364	Recently replaced the belt on my Vaquero, I matched one up with a gates belt. Go to a bonafied gates store, look in their catalog. It fits a grain elevator drive system... GATES 139T , as per the factory service manual, is helluva lot cheaper, is 40% stronger....wear on mine is great.... https://www.amazon.com/Gates-Strengt...ustomerReviews __________________ --------------------- Don't start no schit, there won't be no schit.... My Sarcasm is directly proportional to the amount of Stupidity involved --------------------- VBA#03239 VROC#37400 VRA --------------------- 2014 Vaquero 2001 Nomad FI 2003 Street Glide (sold) 1500 Meanie, fresh rebuild (sold) 90s BUBF Bobber (sold) 2001 UltraCycle FatPounder (Sold) 1975 HD ElectraGlide (Sold) 1982 Kawasaki Z1 Chopper (Sold) Suck It Up & Ride! Last edited by DragonLady58; Today at 04:08 AM.
	0

10-08-2024, 02:21 PM	#4
redjay Top Contributor Join Date: Feb 2008 Location: Ontario Posts: 6,981	https://www.denniskirk.com/belt-driv...prd/020540.sku How wide is the belt on your Voyager ?
	0