Ideas needed - Updated! - Page 2

**ringadingh** · 05-25-2008, 08:45 PM

Lookin good CJ, now you need the rear fender bumper to go with the rails.

cactusjack · 05-26-2008, 12:21 AM

Quote:

Originally Posted by Ringadingh

Lookin good CJ, now you need the rear fender bumper to go with the rails.

Yeah, I'm trying to find one of those.

misunderstood · 05-26-2008, 06:52 AM

Quote:

Originally Posted by cactusjack

Quote:

Originally Posted by Ringadingh

Lookin good CJ, now you need the rear fender bumper to go with the rails.

Yeah, I'm trying to find one of those.

Hard to find used. New about $150 + shipping

http://www.powersportspartsonline.co...d/0/rid/126370

cactusjack · 05-26-2008, 09:46 AM

Quote:

Originally Posted by Misunderstood

Quote:

Originally Posted by cactusjack

Yeah, I'm trying to find one of those.

Hard to find used. New about $150 + shipping

http://www.powersportspartsonline.co...d/0/rid/126370

Thanks Dave. I assume 1500/1600 Nomad = interchangeable? I see a lot of parts online for the 1500 Nomad, and not the 1600. I always assumed the vendors need to update their content.

radco · 05-26-2008, 09:53 AM

Before you BUY Check w/SAM at Smithe Bros,,,,
She averaes 20% over Cost her
E mail is doodledogsmom@aol.com If you Call SMITHs YOU must ASK for SAM for the Discount!!!
http://www.smithbrothersoneonta.com/
I have been REAL Happy with HER prices, Hope it works out...Rich

ruruson1 · 05-26-2008, 10:35 AM

IF you want womething different check out VIP trunks, yours looks very similar and they have an LED spoiler thet may fit it. you can find it by googling VIP motorcycle trucks.

cactusjack · 05-27-2008, 10:36 AM

Quote:

Originally Posted by ruruson1 #483

IF you want womething different check out VIP trunks, yours looks very similar and they have an LED spoiler thet may fit it. you can find it by googling VIP motorcycle trucks.

I have the Mutazu DMY trunk, which is the same thing. It had a VIP badge on it, which I promptly removed. I didn't care for the spoiler look, so I didn't order one.

cactusjack · 05-28-2008, 09:43 AM

I found a thread discussing the rear fender trim on the Delphi Vulcan Forum. The 1500 trim will not interchange with the 1600 fender without some "creative engineering". Nobody makes a 1600-specific unit. The issue, apparently is how the upper end of the rail attaches to the fender struts. Also, the 1600 fender is wider and the clearance between the rail and the fender edge is only the width of a couple of sheets of paper.

I'm posting this in case anyone is thinking of ordering the fender trim that Misunderstood posted the link to, expecting it to bolt right on.

**ringadingh** · 05-28-2008, 05:00 PM

Quote:

Originally Posted by cactusjack

I found a thread discussing the rear fender trim on the Delphi Vulcan Forum. The 1500 trim will not interchange with the 1600 fender without some "creative engineering". Nobody makes a 1600-specific unit. The issue, apparently is how the upper end of the rail attaches to the fender struts. Also, the 1600 fender is wider and the clearance between the rail and the fender edge is only the width of a couple of sheets of paper.

I'm posting this in case anyone is thinking of ordering the fender trim that Misunderstood posted the link to, expecting it to bolt right on.

Get creative and put one on, Im sure you can do it CJ. ;)

tomk · 06-12-2008, 08:09 PM

Quote:

Originally Posted by cactusjack

I found a thread discussing the rear fender trim on the Delphi Vulcan Forum. The 1500 trim will not interchange with the 1600 fender without some "creative engineering". Nobody makes a 1600-specific unit. The issue, apparently is how the upper end of the rail attaches to the fender struts. Also, the 1600 fender is wider and the clearance between the rail and the fender edge is only the width of a couple of sheets of paper.

I'm posting this in case anyone is thinking of ordering the fender trim that Misunderstood posted the link to, expecting it to bolt right on.

I have read the same thing. They don't make one for the 1600. I purchased the trim for the rear fender and it just doesn't fit. So for now, I have bag rails and a kind of empty spot under the fender.

macmac · 06-15-2008, 06:43 PM

NO !!!!!!! Jack the fenders are not nearly the same between the 1500 and the 1600....

If you can get a pic up of that led lamp I'ld like a look.

05-25-2008, 08:45 PM	#16
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Ideas needed - Updated! Lookin good CJ, now you need the rear fender bumper to go with the rails. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951 Login or Register to Remove Ads
	0

05-26-2008, 09:53 AM	#20
radco Sr. Member Join Date: Oct 2007 Location: Dedham Maine Posts: 4,199	Ideas needed - Updated! Before you BUY Check w/SAM at Smithe Bros,,,, She averaes 20% over Cost her E mail is doodledogsmom@aol.com If you Call SMITHs YOU must ASK for SAM for the Discount!!! http://www.smithbrothersoneonta.com/ I have been REAL Happy with HER prices, Hope it works out...Rich __________________ Login or Register to Remove Ads
	0

05-26-2008, 10:35 AM	#21
ruruson1 Member Join Date: Apr 2008 Location: Harrison, Arkansas Posts: 195	Ideas needed - Updated! IF you want womething different check out VIP trunks, yours looks very similar and they have an LED spoiler thet may fit it. you can find it by googling VIP motorcycle trucks.
	0

05-28-2008, 09:43 AM	#23
cactusjack Mega-Contributor Join Date: Sep 2007 Location: Where it doesn't snow...ever! Posts: 21,926	Ideas needed - Updated! I found a thread discussing the rear fender trim on the Delphi Vulcan Forum. The 1500 trim will not interchange with the 1600 fender without some "creative engineering". Nobody makes a 1600-specific unit. The issue, apparently is how the upper end of the rail attaches to the fender struts. Also, the 1600 fender is wider and the clearance between the rail and the fender edge is only the width of a couple of sheets of paper. I'm posting this in case anyone is thinking of ordering the fender trim that Misunderstood posted the link to, expecting it to bolt right on. __________________ Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08\|Custer '09\|Cortez '10\|Crescent City '11\|Kanab '12\|Antlers '12\|Estes Park '13\|Antlers '13\|Orofino '14\|The Dalles '17
	0

06-15-2008, 06:43 PM	#26
macmac Sr. Contributor Join Date: Apr 2008 Location: Tamworth New Hampster 06 1600 Posts: 12,484	Ideas needed - Updated! NO !!!!!!! Jack the fenders are not nearly the same between the 1500 and the 1600.... If you can get a pic up of that led lamp I'ld like a look. __________________ 06 1600 Nomad Just call me Mac molon labe come and get it
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
looking for ideas	bugman	Vulcan Nomad/Vaquero/Voyager	15	11-16-2009 08:22 PM
ideas please	ffron69	1500 & 1600 Nomad	18	08-13-2009 02:55 PM
Any ideas along this route?	Jared	Rides/Trip Reports/Travel Information	3	05-18-2009 04:54 PM
Any Ideas?	Top Cat	1500 & 1600 Nomad	10	05-17-2009 04:46 PM
Any Ideas On How TO Not Get Ran Over?	zoom45	Vulcan Nomad/Vaquero/Voyager	53	09-16-2008 12:49 PM