|
|
07-27-2013, 11:14 AM
|
#1 |
|
Sr. Member
Join Date: Mar 2009
Location: Newburgh IN
Posts: 3,404
|
spark plug tubes ?
What tool do you use to remove the spark plug tubes??
I did the cam chain tensioner extenders and need to check the tubes. I think I may have oil coming out of one. Bob 2008 Nomad
__________________
VBA #01084
"A well regulated militia being necessary to the security of a free State, the right of the People to keep and bear arms shall not be infringed." Login or Register to Remove Ads |
|
|
07-28-2013, 11:03 AM
|
#2 |
|
Member
Join Date: Feb 2009
Location: Clinton, CT
Posts: 223
|
the hex size is 27mm or 1 & 1/16
If you need new plug sleeves I have a set new in package retail for $26.80 on line I will sell for $50.00 shipped. You will need new O-rings, also if you take one out to look at you will also need O-rings to put it back together. |
|
|
|
07-28-2013, 11:27 AM
|
#3 |
|
Sr. Member
Join Date: Mar 2009
Location: Newburgh IN
Posts: 3,404
|
I did not take them out, I used a flashlight and looked in the hole and did not see any oil so I think I am OK.
Going for a ride in a little while will know for sure when I get home. If I need them I'll contact you. Thanks, Bob
__________________
VBA #01084
"A well regulated militia being necessary to the security of a free State, the right of the People to keep and bear arms shall not be infringed." |
|
|
|
07-28-2013, 11:51 AM
|
#4 |
|
Sr. Contributor
Join Date: Apr 2008
Location: Tamworth New Hampster 06 1600
Posts: 12,484
|
Bob just make sure the tubes are clean, then ride and check. Just past the bottom of the tubes are holes, that are supposed to be there, and are rain/ wash drains. make sure they are clean too. Mud wasps tend to clog mine with nests.
__________________
 06 1600 Nomad Just call me Mac molon labe come and get it |
|
|
Linear Mode
