|
01-13-2014, 03:45 PM | #1 |
Member
Join Date: Apr 2013
Location: Jefferson City, Missouri
Posts: 372
|
Where do you mount the AVON heated grip controller?
I am trying to install Avon heated grips (Chrome MT-AIR-90-CH-HT) on my 2011 Voyager. I got both grips installed just fine. However, I cannot figure out where to mount the controller/switch. The bolt holes on the controller do not match the screws on the master cylinders, and the back clamp is way too small to mount the controller on the 1" diameter handlebars.
Any ideas? Thanks.
__________________
2011 Voyager 1700, Ebony/Pearl Meteor Gray Bridgestone Exedra Max tires in stock sizes Heated Avon grips with Throttle Mod Cobra Scalloped Slip-ons Thunder Mfg. Intake Gasket DEI Titanium exhaust header wrap Corbin heated seat. Polk Audio db521 speakers Mobil 1 Racing 4T 10W-40 with Mobil 1 M1-110 filter Kuryakyn Longhorn Offset Dually Highway Pegs Chrome passenger running board covers All new fluids and lube. Login or Register to Remove Ads |
|
01-13-2014, 09:58 PM | #2 |
Sr. Member
Join Date: Apr 2012
Location: West Coast, North Island, New Zealand
Posts: 1,375
|
I've been researching the same problem while my own Avon heated grips are in the post from the USA to NZ... Here's what Mike Fay from the Delphi forum showed me...
I'll probably do something similar, although I may just take the Dremel to it first either to make it fit around the bars or to make it a wee bit more "low profile".
__________________
Nothing screams poor workmanship like wrinkles in the duct tape '02 1500 blonde Nomad (Sold) '97 800 burgundy Classic (Sold) |
|
01-14-2014, 10:24 AM | #3 |
Advanced Member
Join Date: Jul 2011
Location: VA
Posts: 566
|
I also was wondering the same thing . . . Have mine in a box ready to put on - just haven't had the time to dig into it yet . . .
__________________
2011 Voyager ABS Thunder Air Kit Power Pro Cobra Tri-Ovals Wrapped Header Pipes Heat Deflectors (from ebay) CB/Rear Speakers Avon grips with Throttle Magic by RACNRAY Shiny Chrome stuff Michelin Commander IIs Kury T/S Mirrors Sagebrush Design tank bib w/pouch Russell Day Long Seat w/Backrest Lots of Miles and Many More Smiles! Blue Knights - Virginia II Ride With Pride |
|
01-14-2014, 10:31 AM | #4 |
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
I made a bracket from a piece of aluminium angle, and mounted it on my mirror stem.
I have posted pics of it here somewhere. I had one made on each side, the other was for my cruise control pad. Once its polished it looks like it was made for the bike.
__________________
2002 Nomad aka Bountyhunter VBA #27 VROC #18951 |
|