Anyone using Chucksters Risers?

jtascone · 05-12-2021, 01:11 PM

After reading a lot on here about risers, I was planning on putting on PhatII risers on my Nomad 1600. But apparently they are out of business. I'm worried about going with Chucksters as there is no pullback to them. Any suggestions on risers with pullback other than Phatrisers that won't require modding anything? Anyone using the 3" Chucksters? I'm only 5'7" and have to reach quite a bit forward with the stock setup. Thanks.

ldhthept · 05-12-2021, 11:57 PM

I have the 3” on mine, love em. You can also roll the bars back to you a little. Sounds like you might need to look at a seat or at least a backrest. Get you closer to the bars.

mick56 · 05-13-2021, 03:43 AM

I bought these. So many postions to set them at. They do 1in to fit the Vulcans too.

https://www.ebay.co.uk/itm/303113629...kAAOSwhV1cobQA

gumboss · 05-14-2021, 02:11 PM

I am about your same height. I bought Chuckster's 3" risers several years ago. A back rest and the risers were money well spent. No more sore shoulder or back after installation.

mick56 · 05-14-2021, 02:45 PM

Get forward pegs on the crash bars,. A back rest will help too.
Leave the gear lever where it is.

Flapjack · 05-17-2021, 03:22 AM

I am 5'10 and went with the 2.5" risers. They have enough pull back to resolve the shoulder/neck/back pain for me. I would imagine the 3" would do the trick. When I ordered them, he was very helpful with information. May want to ask if you can try one size and return for another if needed.

flavor · 05-20-2021, 10:04 AM

I bought Chuckster's risers. I think they're about 2 3/4 in. No change necessary to the break and clutch lines needed. Best investment for bike I've made.

degreaser · 05-21-2021, 07:44 AM

too bad that Aeromach Mfg. in Charlotte NC went out of business, I think they did because their web site page doesn't work, but before they did I installed their 4 up x 2 back risers on my 800, or is it 2 up 4 back, forget, anyways they are great and it's a shame that you can't get them anymore, I think they are the AM-4275C ones

05-12-2021, 01:11 PM	#1
jtascone Member Join Date: Jul 2015 Posts: 282	Anyone using Chucksters Risers? After reading a lot on here about risers, I was planning on putting on PhatII risers on my Nomad 1600. But apparently they are out of business. I'm worried about going with Chucksters as there is no pullback to them. Any suggestions on risers with pullback other than Phatrisers that won't require modding anything? Anyone using the 3" Chucksters? I'm only 5'7" and have to reach quite a bit forward with the stock setup. Thanks. Login or Register to Remove Ads
	0

05-13-2021, 03:43 AM	#3
mick56 Sr. Member Join Date: Nov 2013 Location: The Newforest, England Posts: 4,664	I bought these. So many postions to set them at. They do 1in to fit the Vulcans too. https://www.ebay.co.uk/itm/303113629...kAAOSwhV1cobQA __________________ when this you see, remember me, and bear me in your mind, let all the world say what they may, speak of me as you find. Last edited by mick56; 05-13-2021 at 03:46 AM.
	0

05-14-2021, 02:45 PM	#5
mick56 Sr. Member Join Date: Nov 2013 Location: The Newforest, England Posts: 4,664	Get forward pegs on the crash bars,. A back rest will help too. Leave the gear lever where it is. __________________ when this you see, remember me, and bear me in your mind, let all the world say what they may, speak of me as you find. Login or Register to Remove Ads Last edited by mick56; 05-14-2021 at 02:55 PM.
	0

05-21-2021, 07:44 AM	#8
degreaser Advanced Member Join Date: Mar 2010 Location: Canada Posts: 614	too bad that Aeromach Mfg. in Charlotte NC went out of business, I think they did because their web site page doesn't work, but before they did I installed their 4 up x 2 back risers on my 800, or is it 2 up 4 back, forget, anyways they are great and it's a shame that you can't get them anymore, I think they are the AM-4275C ones __________________ 04 1500 sold, got an 800 now Atlantic Canada
	0

05-12-2021, 11:57 PM	#2
ldhthept Sr. Member Join Date: Mar 2010 Location: Tallahassee FL Posts: 1,041	I have the 3” on mine, love em. You can also roll the bars back to you a little. Sounds like you might need to look at a seat or at least a backrest. Get you closer to the bars.
	0

05-14-2021, 02:11 PM	#4
gumboss Jr. Member Join Date: Apr 2012 Location: New Bern, NC Posts: 10	I am about your same height. I bought Chuckster's 3" risers several years ago. A back rest and the risers were money well spent. No more sore shoulder or back after installation.
	0

05-17-2021, 03:22 AM	#6
Flapjack Member Join Date: Mar 2018 Location: Las Vegas Posts: 116	I am 5'10 and went with the 2.5" risers. They have enough pull back to resolve the shoulder/neck/back pain for me. I would imagine the 3" would do the trick. When I ordered them, he was very helpful with information. May want to ask if you can try one size and return for another if needed.
	0

05-20-2021, 10:04 AM	#7
flavor Sr. Member Join Date: Apr 2008 Location: RI Posts: 1,351	I bought Chuckster's risers. I think they're about 2 3/4 in. No change necessary to the break and clutch lines needed. Best investment for bike I've made.
	1