Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > 1500 & 1600 Nomad

Reply
 
Thread Tools Search this Thread Display Modes
Old 05-02-2021, 11:06 AM   #1
tbmmbt   tbmmbt is offline
Member
 
Join Date: Dec 2007
Location: Ky
Posts: 234
06 Nomad Quit while turning

Was taking a ride yesterday and came to a place where I was going to make a left turn. Put signal on and proceeded to make my turn. Half way thru the turn the bike quit running. Pulled in clutch hit starter button fired right up and proceeded to where I was going. What caused that?? or just one of those things? Thanks.



Login or Register to Remove Ads
 
Reply With Quote
Old 05-02-2021, 12:29 PM   #2
redjay   redjay is offline
Top Contributor
 
Join Date: Feb 2008
Location: Ontario
Posts: 6,984
One of those things. I almost dumped the bike with my wife on the back when pulling away and turning from a stop sign. It gasped for breath and stumbled and we almost went down. I think it was not long after that I bought a fuel processor, which helped.
 
Reply With Quote
Old 05-04-2021, 11:28 AM   #3
tcat   tcat is offline
Member
 
tcat's Avatar
 
Join Date: Jul 2010
Location: Midlothian, TX
Posts: 94
My 07 would do this when it was hot - you may want to check your idle setting, problem went away after bumping mine up a bit.
__________________
Tom Harrington
07 Black Nomad (totaled 5/5/18)
02 Silver Goldwing / 03 Sliver Bushtec Quantum GL
 
Reply With Quote
Old 05-04-2021, 07:18 PM   #4
tbmmbt   tbmmbt is offline
Member
 
Join Date: Dec 2007
Location: Ky
Posts: 234
Decided to do a throttle cleaning and idled faster after the cleaning so that did some good. Set idle back down. Also my radio would reset itself and turn itself off so checked on that and found the plug connection under the fairing was about to come unplugged as well as one of the wires had vibrated so much it wore the tape and insulation off. Got to thinking that maybe the bare wire was getting a direct short and while messing with it I blew the acc 10amp fuse so replaced that and all seems to be back to normal. Hopefully that is all it was so we will see.
 
Reply With Quote
Old 05-05-2021, 08:32 PM   #5
degreaser   degreaser is offline
Advanced Member
 
degreaser's Avatar
 
Join Date: Mar 2010
Location: Canada
Posts: 614
that's probably all it was, a short in wiring for the radio
__________________
04 1500 sold, got an 800 now
Atlantic Canada



Login or Register to Remove Ads
 
Reply With Quote
Reply





Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.