Cam chain tensioner extenders

abbo · 09-03-2011, 12:59 PM

Good day all- just finished installing extenders on my bike - 42500miles- and the results are unbelievable. wasn't as difficult as I thought it would be. Took about 2hrs by myself! Chuckster makes a good product and his turn around time on orders is unheard of. Thanks to all on this forum for posting info on things.

**Jared** · 09-03-2011, 03:45 PM

My bike has about 24K miles on it and I have been thinking about going ahead and doing the extenders. I have the hanging in my garage.

Was the noices from the loose chains obvious? You have 40k+ miles on your bike makes me think I ought to wait a bit longer.

cactusjack · 09-03-2011, 03:56 PM

Quote:

Originally Posted by Utah Motorcyclist

My bike has about 24K miles on it and I have been thinking about going ahead and doing the extenders. I have the hanging in my garage.

Was the noices from the loose chains obvious? You have 40k+ miles on your bike makes me think I ought to wait a bit longer.

24k is a little premature for cam chain extenders. I wouldn't worry about them for at least another 10k, unless you have noise or check them and you are out of travel.

abbo · 09-03-2011, 04:42 PM

:) Yes there was a distinctive metal click (some describe as a bike chain type noise). IT is gone. 24k is probably a little soon but it also depends on your driving style I am told.

AlabamaNomadRider · 09-03-2011, 05:51 PM

Jared I would definitely wait until you are around the 35,000 mile range. Wait until the last possible moment and that way the chain may have stretched as much as it is going to. Then you won't have to worry about doing it again. Just my thought.

**Cajunrider** · 09-03-2011, 07:18 PM

I had 3 teeth of travel left on one and 4 on the other at 25,000 miles. If it's noisy Jared, I would take a look. If not, wait a few more thousand miles. It doesn't get noisy all at once. It's progressive making it less noticeable.

kowboy · 09-03-2011, 07:40 PM

will this cut down on sounds like, valve clatter. i have right at 42k an getting pretty noisey. pleases advise and also do the tentioners come with instuctions.

abbo · 09-03-2011, 08:27 PM

:) Kowboy - Instructions are on Gadgets Fix it page and you can go to page 9 on 1500/1600 garage section(the site you are on with this question There is a thread labeled Know session with good insight and pictures. . ALSO i am only about 3 hrs from your location- know anyone half way or so and I could help you.

**ringadingh** · 09-03-2011, 08:51 PM

I wouldn't do it until it was neccessary, wait until your extenders are at, or almost totally out of travel. Just check them once or twice a season until its time.

usranger74 · 09-03-2011, 09:10 PM

Quote:

Originally Posted by abbo

:)ALSO i am only about 3 hrs from your location- know anyone half way or so and I could help you.

I made a note of this. When I am ready for the service I will offer to by the beer and ride to your shop!!

**Jared** · 09-03-2011, 09:43 PM

Quote:

Originally Posted by Ringadingh

I wouldn't do it until it was neccessary, wait until your extenders are at, or almost totally out of travel. Just check them once or twice a season until its time.

Is checking them as simple as unbolting them and taking a look?

Also, the left side would be easier to look at. You'd assume they wear about the same speed on each cylinder, right?

**ringadingh** · 09-03-2011, 10:34 PM

Both tensioners wear approx the same, you can unscrew the cap and check the depth without having to reset the tensioner. Take a look at Gadgets site, he has an excellent how to on checking and replacing tensioners.

mikeyger · 09-04-2011, 06:25 AM

Ring is right! Gadjet tells how to check them for travel.About a 10 minute job!

**Cajunrider** · 09-04-2011, 08:28 AM

Be careful not to break the big spring when screwing the cap back on. The best method is to pull the cap, check the travel, and then remove the entire assembly and reset it according to the shop manual instructions. A few have heard the spring snap after it binding inside of the cap as it is screwed back on.

medicaldawg · 09-04-2011, 03:54 PM

i waited till 70,000 to change mine your ok

09-03-2011, 12:59 PM	#1
abbo Member Join Date: Apr 2008 Location: Rockwell City, Iowa Posts: 215	Cam chain tensioner extenders Good day all- just finished installing extenders on my bike - 42500miles- and the results are unbelievable. wasn't as difficult as I thought it would be. Took about 2hrs by myself! Chuckster makes a good product and his turn around time on orders is unheard of. Thanks to all on this forum for posting info on things. Login or Register to Remove Ads
	0

09-03-2011, 03:45 PM	#2
Jared Join Date: Mar 2009 Location: Greeley, Colorado Posts: 6,772	Cam chain tensioner extenders My bike has about 24K miles on it and I have been thinking about going ahead and doing the extenders. I have the hanging in my garage. Was the noices from the loose chains obvious? You have 40k+ miles on your bike makes me think I ought to wait a bit longer. __________________ Jared VBA #1051 (Former President)
	0

09-03-2011, 04:42 PM	#4
abbo Member Join Date: Apr 2008 Location: Rockwell City, Iowa Posts: 215	Cam chain tensioner extenders :) Yes there was a distinctive metal click (some describe as a bike chain type noise). IT is gone. 24k is probably a little soon but it also depends on your driving style I am told.
	0

09-03-2011, 05:51 PM	#5
AlabamaNomadRider Sr. Contributor Join Date: Jul 2009 Location: Boaz, Alabama Posts: 13,742	Cam chain tensioner extenders Jared I would definitely wait until you are around the 35,000 mile range. Wait until the last possible moment and that way the chain may have stretched as much as it is going to. Then you won't have to worry about doing it again. Just my thought. __________________ Gene Cross, Jr. Boaz, Alabama KawaNOW/VBA #1181 Login or Register to Remove Ads
	0

09-03-2011, 07:18 PM	#6
Cajunrider Join Date: Apr 2008 Location: (SE Louisiana) Posts: 8,340	Cam chain tensioner extenders I had 3 teeth of travel left on one and 4 on the other at 25,000 miles. If it's noisy Jared, I would take a look. If not, wait a few more thousand miles. It doesn't get noisy all at once. It's progressive making it less noticeable. __________________ 2016 Electra Glide Ultra Limited CVO Palladium Silver / Phantom Blue 110 cu in SE 2012 Electra Glide Ultra Limited (Traded 6/22/16) Tequila Sunrise / HD Orange Vance & Hines true dual headers Rinehart 4" slip ons Screamin Eagle Super Tuner Screamin Eagle Stage 1 intake Dyno tuned H.O.G.# 4514015 2007 Nomad 1600 (Traded 6/23/12) VBA #482
	0

09-03-2011, 07:40 PM	#7
kowboy Member Join Date: Sep 2010 Location: ralston nebr Posts: 86	Cam chain tensioner extenders will this cut down on sounds like, valve clatter. i have right at 42k an getting pretty noisey. pleases advise and also do the tentioners come with instuctions.
	0

09-03-2011, 08:27 PM	#8
abbo Member Join Date: Apr 2008 Location: Rockwell City, Iowa Posts: 215	Cam chain tensioner extenders :) Kowboy - Instructions are on Gadgets Fix it page and you can go to page 9 on 1500/1600 garage section(the site you are on with this question There is a thread labeled Know session with good insight and pictures. . ALSO i am only about 3 hrs from your location- know anyone half way or so and I could help you.
	0

09-03-2011, 08:51 PM	#9
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Cam chain tensioner extenders I wouldn't do it until it was neccessary, wait until your extenders are at, or almost totally out of travel. Just check them once or twice a season until its time. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

09-03-2011, 10:34 PM	#12
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Cam chain tensioner extenders Both tensioners wear approx the same, you can unscrew the cap and check the depth without having to reset the tensioner. Take a look at Gadgets site, he has an excellent how to on checking and replacing tensioners. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

09-04-2011, 06:25 AM	#13
mikeyger Member Join Date: Aug 2010 Location: hermitage tenn Posts: 410	Cam chain tensioner extenders Ring is right! Gadjet tells how to check them for travel.About a 10 minute job!
	0

09-04-2011, 08:28 AM	#14
Cajunrider Join Date: Apr 2008 Location: (SE Louisiana) Posts: 8,340	Cam chain tensioner extenders Be careful not to break the big spring when screwing the cap back on. The best method is to pull the cap, check the travel, and then remove the entire assembly and reset it according to the shop manual instructions. A few have heard the spring snap after it binding inside of the cap as it is screwed back on. __________________ 2016 Electra Glide Ultra Limited CVO Palladium Silver / Phantom Blue 110 cu in SE 2012 Electra Glide Ultra Limited (Traded 6/22/16) Tequila Sunrise / HD Orange Vance & Hines true dual headers Rinehart 4" slip ons Screamin Eagle Super Tuner Screamin Eagle Stage 1 intake Dyno tuned H.O.G.# 4514015 2007 Nomad 1600 (Traded 6/23/12) VBA #482
	0

09-04-2011, 03:54 PM	#15
medicaldawg Member Join Date: Aug 2009 Location: rockmart ga. Posts: 240	Cam chain tensioner extenders i waited till 70,000 to change mine your ok __________________ 99 1500
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cam Chain Tensioner Extenders Installation	Cajunrider	Engine	1	04-26-2012 11:33 PM
Cam Chain tensioner extenders	blackdogbrian	Vulcan Nomad/Vaquero/Voyager	83	05-24-2011 07:03 PM
cam chain tensioner	medicaldawg	1500 & 1600 Nomad	21	08-13-2010 11:07 AM
Cam chain tensioner extenders installed!!	phred	1500 & 1600 Nomad	27	02-24-2010 10:34 PM
Front cam chain tensioner	zoom45	1500 & 1600 Nomad	13	05-20-2009 10:28 AM