looking for help in my area

vince · 11-07-2016, 01:54 PM

Hey fellas I think I am beginning to hear some noise from the cam chains. I bought extenders about a year ago so I have those already. I have spoken with 3 shops in my area and nobody knows what I am talking about. One shop Walk-er-ride in Powder Springs talked about it for 10 minutes and then said no "too risky". Does anyone know of a shop in the in the Atlanta -Marietta area who can do this job? I do not have the tools or the know-how to do it myself but I am willing to watch and learn. Oh, and pay of course. Thanks in advance.

Vince
770-883-0957

cactusjack · 11-07-2016, 06:12 PM

Cam chain extenders are not a dealer part, and I doubt many dealers would have any clue about them. They are pretty much a DIY job.

**nomadtom69** · 11-07-2016, 08:08 PM

Cliff might be able to help with instructions on this

**nomadtom69** · 11-07-2016, 08:10 PM

Vulcan E give him a shout

**goose** · 02-06-2017, 02:02 PM

Vince, I've not did any either but wouldn't be at all apprehensive to try it with you when you're ready?
I'm about 2hours away in S.E.Tennessee area and should be able to supply the tools..

Sent from my LGLS990 using Tapatalk

**canuckrider** · 02-06-2017, 03:53 PM

Vince,
I did mine a year or two ago and didn't find it as intimidating as it first sounded. Gadget's site is very helpful but I found the best instructions (with detailed photos) on Jared's site www.utahmotorcyclist.org. Unfortunately, looks like his site is no longer functioning. Perhaps PM him and he could email you the instructions in a PDF format.

One bit of advice I will give is to take off the LH crankcase cover and make sure that you position each cylinder at TDC when you do that particular cylinder. Yes, guys have done it by just pulling the spark plug and trying to determine when the piston is at TDC, but if you mess up and the cam chain slips on the sprocket, you're in for a real big job that requires splitting the crankcase.

Just my 2 bits worth.

**ringadingh** · 02-06-2017, 04:36 PM

Gadgets Fixit site has a good how to article on them, if the sight is still up somewhere, it will show you how its done.
Its actually easier to do than the way it reads.

**JD Hog** · 02-06-2017, 04:55 PM

Quote:

Originally Posted by ringadingh

Gadgets Fixit site has a good how to article on them, if the sight is still up somewhere, it will show you how its done.
Its actually easier to do than the way it reads.

Here is a link to that
http://www.vulcangadgets.com/files/cc_tensioner.html

Here are two different links to his old information
http://www.vulcangadgets.com/#maintenance

http://gadgetsfixit.com/

**Jared** · 02-06-2017, 05:36 PM

I wrote this years ago. Perhaps it will help you do it yourself.

http://utahmotorcyclist.blogspot.com...tensioner.html

vince · 02-07-2017, 08:41 AM

Thanks for the responses I really appreciate it. Jared that is a great write up thanks for sharing. Vulcan E and I have touched base and the plan is for us to get together in early spring when he has the time.

**MAS Tequila** · 02-08-2017, 06:42 AM

You don't have to split the cases to retime the engine.

Whoever started that BS should be ashamed of themselves.

The extenders are a relatively simple installation.

Don't make it harder than it has to be.

MT

Quote:

Originally Posted by canuckrider

Vince,

One bit of advice I will give is to take off the LH crankcase cover and make sure that you position each cylinder at TDC when you do that particular cylinder. Yes, guys have done it by just pulling the spark plug and trying to determine when the piston is at TDC, but if you mess up and the cam chain slips on the sprocket, you're in for a real big job that requires splitting the crankcase.

Just my 2 bits worth.

11-07-2016, 01:54 PM	#1
vince Member Join Date: Jun 2008 Location: Marietta Ga. Posts: 141	looking for help in my area Hey fellas I think I am beginning to hear some noise from the cam chains. I bought extenders about a year ago so I have those already. I have spoken with 3 shops in my area and nobody knows what I am talking about. One shop Walk-er-ride in Powder Springs talked about it for 10 minutes and then said no "too risky". Does anyone know of a shop in the in the Atlanta -Marietta area who can do this job? I do not have the tools or the know-how to do it myself but I am willing to watch and learn. Oh, and pay of course. Thanks in advance. Vince 770-883-0957 Login or Register to Remove Ads
	0

11-07-2016, 06:12 PM	#2
cactusjack Mega-Contributor Join Date: Sep 2007 Location: Where it doesn't snow...ever! Posts: 21,926	Cam chain extenders are not a dealer part, and I doubt many dealers would have any clue about them. They are pretty much a DIY job. __________________ Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08\|Custer '09\|Cortez '10\|Crescent City '11\|Kanab '12\|Antlers '12\|Estes Park '13\|Antlers '13\|Orofino '14\|The Dalles '17
	0

11-07-2016, 08:08 PM	#3
nomadtom69 Join Date: Sep 2010 Location: Maryville, Tn Posts: 2,656	Cliff might be able to help with instructions on this __________________ (NomadTom69)Tom Green Previous bikes - 2004 BMW R1200 CLC 2006 Nomad 1600 Black -1985 BMW K100 RT VBA #001609 Viet-Nam Vet 71-72 Maryville , Tn. Maggie Valley '11-Townsend '12-Estes Park '13- Copperhead fall rally "13- Elkins WV '14- Eureka Springs ' 15- Helen Ga. SE Rally '16
	0

11-07-2016, 08:10 PM	#4
nomadtom69 Join Date: Sep 2010 Location: Maryville, Tn Posts: 2,656	Vulcan E give him a shout __________________ (NomadTom69)Tom Green Previous bikes - 2004 BMW R1200 CLC 2006 Nomad 1600 Black -1985 BMW K100 RT VBA #001609 Viet-Nam Vet 71-72 Maryville , Tn. Maggie Valley '11-Townsend '12-Estes Park '13- Copperhead fall rally "13- Elkins WV '14- Eureka Springs ' 15- Helen Ga. SE Rally '16
	0

02-06-2017, 02:02 PM	#5
goose Join Date: Sep 2008 Location: Cleveland, Tennessee Posts: 1,206	Vince, I've not did any either but wouldn't be at all apprehensive to try it with you when you're ready? I'm about 2hours away in S.E.Tennessee area and should be able to supply the tools.. Sent from my LGLS990 using Tapatalk __________________ 2014 Nomad 1700(Satin Black&White) 2007 Nomad 1600(Black Beauty) 2008 Versys 650 2003 Bandit 1200 CMA GateKeepers, Southern Cruisers#034, Patriot Guard Rider Login or Register to Remove Ads
	0

02-06-2017, 03:53 PM	#6
canuckrider Join Date: Jun 2010 Location: Okotoks, AB, Canada Posts: 1,090	Vince, I did mine a year or two ago and didn't find it as intimidating as it first sounded. Gadget's site is very helpful but I found the best instructions (with detailed photos) on Jared's site www.utahmotorcyclist.org. Unfortunately, looks like his site is no longer functioning. Perhaps PM him and he could email you the instructions in a PDF format. One bit of advice I will give is to take off the LH crankcase cover and make sure that you position each cylinder at TDC when you do that particular cylinder. Yes, guys have done it by just pulling the spark plug and trying to determine when the piston is at TDC, but if you mess up and the cam chain slips on the sprocket, you're in for a real big job that requires splitting the crankcase. Just my 2 bits worth. __________________ "Sun on my face, wind in my hair, sound of my bike in my ears and peace in my soul..." VBA Member #01514 2008 Nomad 1600, Blue & Silver
	0

02-06-2017, 04:36 PM	#7
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Gadgets Fixit site has a good how to article on them, if the sight is still up somewhere, it will show you how its done. Its actually easier to do than the way it reads. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

02-06-2017, 05:36 PM	#9
Jared Join Date: Mar 2009 Location: Greeley, Colorado Posts: 6,772	I wrote this years ago. Perhaps it will help you do it yourself. http://utahmotorcyclist.blogspot.com...tensioner.html __________________ Jared VBA #1051 (Former President)
	0

02-07-2017, 08:41 AM	#10
vince Member Join Date: Jun 2008 Location: Marietta Ga. Posts: 141	Thanks for the responses I really appreciate it. Jared that is a great write up thanks for sharing. Vulcan E and I have touched base and the plan is for us to get together in early spring when he has the time.
	0