Arrived! Chuckster's Dual-Plate Intake mod

**taranis** · 12-29-2010, 11:05 PM

Got a very pleasant surprise this morning - one dual-plate intake kit from Joe Norris! Two days from order until arrival - now that's fast! I had already planned on changing the oil, replacing a burned-out lightbar bulb and the dead horn on the bike, so this just got added right to the list.

Since Cajunrider and Gene installed one of these setups on billmac's bike not too long ago during a KNOW session, I was still pretty fresh with how to do it on my own. Total time took about an hour, two if you count the fact that I could NOT find the K&N E-3402 anywhere in the DFW area..nor could I find a suitable replacement.

:(" title="

" border="0"/> Sooo.. one should be arriving on my doorstep tomorrow.

Otherwise, the installation went fine. Excellent fit/finish on the filter plate and had all the parts I would've needed. Incidentally, while billmac didn't need the spacers for his bike, I needed them, and then some, on mine. ??? I have very little clearance between the tank and the stock dog bowl, but it looks like it'll work out.

Thanks for the REALLY fast turn-around, Joe! Can't wait to take it out after I get it all tuned up tomorrow!

AlabamaNomadRider · 12-29-2010, 11:41 PM

Congratulations on what seems like a great job. Can't wait to see what you think about it once you get out and see how it does.

ndbigfish · 12-30-2010, 08:09 PM

I installed one of Chuckster's Dual plate setups on my 03' 1500. I took it for a ride today. This makes all the difference in the world. Joe is making a spacer to keep the stock cover off of the tank on my 1500. Chuckster's products are super and his support is the best! The combination of an intake, fuel processor and V&H exhaust has made this like a different bike.

jasonc32amg · 12-30-2010, 08:33 PM

Good stuff, that's my next DIY project.

**Cajunrider** · 12-30-2010, 08:58 PM

Quote:

Originally Posted by ndbigfish

I installed one of Chuckster's Dual plate setups on my 03' 1500. I took it for a ride today. This makes all the difference in the world. Joe is making a spacer to keep the stock cover off of the tank on my 1500. Chuckster's products are super and his support is the best! The combination of an intake, fuel processor and V&H exhaust has made this like a different bike.

Runs like a scalded dog now..... ;)

roads1 · 12-30-2010, 10:28 PM

how do i find out about chucksters items?

jasonc32amg · 12-30-2010, 10:37 PM

Quote:

Originally Posted by roads1

how do i find out about chucksters items?

If you google "chuckster intake" you'll get some good reading...

ndbigfish · 12-30-2010, 11:02 PM

There is a link on the Kawanow homepage.

OR

http://www.chucksterscustoms.com/

ndbigfish · 12-30-2010, 11:06 PM

Quote:

Originally Posted by Cajunrider

Quote:

Originally Posted by ndbigfish

I installed one of Chuckster's Dual plate setups on my 03' 1500. I took it for a ride today. This makes all the difference in the world. Joe is making a spacer to keep the stock cover off of the tank on my 1500. Chuckster's products are super and his support is the best! The combination of an intake, fuel processor and V&H exhaust has made this like a different bike.

Runs like a scalded dog now..... ;)

Don't know about a scalded dog but it is at least equivalent to a turpentined feline!

**Cajunrider** · 12-31-2010, 12:42 AM

fltekdiver · 01-04-2011, 09:39 PM

On the VTX I had, we removed all the desomg equipment, and blocked off the REED valves with block off plates.

Is this the same thing on the Nomads?

ndbigfish · 01-05-2011, 08:29 AM

Yes. The reed valve ports are covered with coasters.

VulcanE · 01-05-2011, 01:31 PM

Quote:

Originally Posted by fltekdiver

On the VTX I had, we removed all the desomg equipment, and blocked off the REED valves with block off plates.

Is this the same thing on the Nomads?

What they are talking about here is an aftermarket intake. Joe's dual-plate intake kit is a lot more cost effective than buying a Thunder kit, or hypercharge. It does the same, but for a lot less. I've seen his intake kit, and it is very similar to my Thunder Stealth intake.
a lot of us also have removed the reed valves, and blocked off where they were with "coasters", aka block-off plates.

fltekdiver · 01-05-2011, 08:19 PM

Got ya. I did that on a few bikes, didn't know you can do that on this one

On the VTX, it took away any deceleration popping when you added a hyper charger, and pipes.

I removed all the de-smog equipment on it. Now that I know that can be done on this bike, I'll order them both. I'm a big fan of doing this mod

Gadgets page for all this?

ndbigfish · 01-06-2011, 08:38 AM

Gadget for the coasters, but not Chuckster's Dual Plate.

Dual Plate is here:

kawanow.proboards.com/index.cgi?board=engine&action=display&thread=20773 &page=1

12-29-2010, 11:05 PM	#1
taranis Join Date: Aug 2008 Location: Grand Prairie, TX Posts: 802	Arrived! Chuckster's Dual-Plate Intake mod Got a very pleasant surprise this morning - one dual-plate intake kit from Joe Norris! Two days from order until arrival - now that's fast! I had already planned on changing the oil, replacing a burned-out lightbar bulb and the dead horn on the bike, so this just got added right to the list. Since Cajunrider and Gene installed one of these setups on billmac's bike not too long ago during a KNOW session, I was still pretty fresh with how to do it on my own. Total time took about an hour, two if you count the fact that I could NOT find the K&N E-3402 anywhere in the DFW area..nor could I find a suitable replacement. :(" title="" border="0"/> Sooo.. one should be arriving on my doorstep tomorrow. Otherwise, the installation went fine. Excellent fit/finish on the filter plate and had all the parts I would've needed. Incidentally, while billmac didn't need the spacers for his bike, I needed them, and then some, on mine. ??? I have very little clearance between the tank and the stock dog bowl, but it looks like it'll work out. Thanks for the REALLY fast turn-around, Joe! Can't wait to take it out after I get it all tuned up tomorrow! __________________ _______________________ "Taranis" and the Lovely Ann KawaNOW Oldschool #885 His: 2006 Nomad Hers: 2008 VN900 Classic LT Login or Register to Remove Ads
	0

12-29-2010, 11:41 PM	#2
AlabamaNomadRider Sr. Contributor Join Date: Jul 2009 Location: Boaz, Alabama Posts: 13,742	Arrived! Chuckster's Dual-Plate Intake mod Congratulations on what seems like a great job. Can't wait to see what you think about it once you get out and see how it does. __________________ Gene Cross, Jr. Boaz, Alabama KawaNOW/VBA #1181
	0

12-30-2010, 08:09 PM	#3
ndbigfish Sr. Member Join Date: Mar 2009 Location: New Braunfels, Texas Posts: 1,162	Arrived! Chuckster's Dual-Plate Intake mod I installed one of Chuckster's Dual plate setups on my 03' 1500. I took it for a ride today. This makes all the difference in the world. Joe is making a spacer to keep the stock cover off of the tank on my 1500. Chuckster's products are super and his support is the best! The combination of an intake, fuel processor and V&H exhaust has made this like a different bike. __________________ Brik VBA #1047 07 Electra Glide Ultra (43,300 & counting) 03 Nomad - 37,972 (traded 5/6/13) 99 Nomad - Only a memory since 4/27/13
	0

12-30-2010, 08:33 PM	#4
jasonc32amg Member Join Date: Dec 2010 Location: Vero Beach, FL Posts: 105	Arrived! Chuckster's Dual-Plate Intake mod Good stuff, that's my next DIY project.
	0

12-30-2010, 10:28 PM	#6
roads1 Member Join Date: Feb 2008 Location: Pensacola, Florida Posts: 76	Arrived! Chuckster's Dual-Plate Intake mod how do i find out about chucksters items?
	0

12-30-2010, 11:02 PM	#8
ndbigfish Sr. Member Join Date: Mar 2009 Location: New Braunfels, Texas Posts: 1,162	Arrived! Chuckster's Dual-Plate Intake mod There is a link on the Kawanow homepage. OR http://www.chucksterscustoms.com/ __________________ Brik VBA #1047 07 Electra Glide Ultra (43,300 & counting) 03 Nomad - 37,972 (traded 5/6/13) 99 Nomad - Only a memory since 4/27/13
	0

12-31-2010, 12:42 AM	#10
Cajunrider Join Date: Apr 2008 Location: (SE Louisiana) Posts: 8,340	Arrived! Chuckster's Dual-Plate Intake mod __________________ 2016 Electra Glide Ultra Limited CVO Palladium Silver / Phantom Blue 110 cu in SE 2012 Electra Glide Ultra Limited (Traded 6/22/16) Tequila Sunrise / HD Orange Vance & Hines true dual headers Rinehart 4" slip ons Screamin Eagle Super Tuner Screamin Eagle Stage 1 intake Dyno tuned H.O.G.# 4514015 2007 Nomad 1600 (Traded 6/23/12) VBA #482
	0

01-04-2011, 09:39 PM	#11
fltekdiver Member Join Date: Dec 2010 Posts: 341	Arrived! Chuckster's Dual-Plate Intake mod On the VTX I had, we removed all the desomg equipment, and blocked off the REED valves with block off plates. Is this the same thing on the Nomads?
	0

01-05-2011, 08:29 AM	#12
ndbigfish Sr. Member Join Date: Mar 2009 Location: New Braunfels, Texas Posts: 1,162	Arrived! Chuckster's Dual-Plate Intake mod Yes. The reed valve ports are covered with coasters. __________________ Brik VBA #1047 07 Electra Glide Ultra (43,300 & counting) 03 Nomad - 37,972 (traded 5/6/13) 99 Nomad - Only a memory since 4/27/13
	0

01-05-2011, 08:19 PM	#14
fltekdiver Member Join Date: Dec 2010 Posts: 341	Arrived! Chuckster's Dual-Plate Intake mod Got ya. I did that on a few bikes, didn't know you can do that on this one On the VTX, it took away any deceleration popping when you added a hyper charger, and pipes. I removed all the de-smog equipment on it. Now that I know that can be done on this bike, I'll order them both. I'm a big fan of doing this mod Gadgets page for all this?
	0

01-06-2011, 08:38 AM	#15
ndbigfish Sr. Member Join Date: Mar 2009 Location: New Braunfels, Texas Posts: 1,162	Arrived! Chuckster's Dual-Plate Intake mod Gadget for the coasters, but not Chuckster's Dual Plate. Dual Plate is here: kawanow.proboards.com/index.cgi?board=engine&action=display&thread=20773 &page=1 __________________ Brik VBA #1047 07 Electra Glide Ultra (43,300 & counting) 03 Nomad - 37,972 (traded 5/6/13) 99 Nomad - Only a memory since 4/27/13
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Chuckster's Dual-Plate Setup - Thoughts	taranis	Vulcan Nomad/Vaquero/Voyager	70	08-06-2012 07:41 PM
Hypercharger versus Chucksters Dual Plate Intake	Hacksaw	1500 & 1600 Nomad	24	08-29-2011 06:18 PM
Chuckster Dual Plate Intake Installation	Cajunrider	Engine	0	11-08-2010 05:43 PM
SOLDChuckster's dual plate air intake system	Jared	Parts & Accessories	8	09-09-2010 11:51 PM
I'm doing the CaddmanQ dual air intake mod...DONE!	ds06nomad	Vulcan Nomad/Vaquero/Voyager	14	01-02-2008 11:03 PM