Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > 1500 & 1600 Nomad

Reply
 
Thread Tools Search this Thread Display Modes
Old 05-24-2021, 04:04 PM   #1
JeeperSean   JeeperSean is offline
Jr. Member
 
Join Date: Sep 2020
Location: Pennsylvania
Posts: 2
Classic and Nomad front forks the same?

I recently put in the Progressive front springs and cut the new spacer to 6" per the directions. Now the bike feels a bit too "twitchy" hitting bumps, and is unnerving particularly in a turn. Now is the spring etc the same as the Classic stock? because the directions show a 5.65" spacer (says re-use stock for Classic) and that is exactly the spacer I took out of the bike to begin with. I feel like i need less pre-load, but i dont want to drop the front end any by doing so... 2006 1600 if it matters.

Thoughts?



Login or Register to Remove Ads
 
Reply With Quote
Old 05-24-2021, 04:34 PM   #2
redjay   redjay is offline
Top Contributor
 
Join Date: Feb 2008
Location: Ontario
Posts: 6,982
You have a 6 inch spacer that you cut and you have a 5.65 spacer that you took out. Put the 5.65 spacer back in and take it for a ride ?
 
Reply With Quote
Old 05-24-2021, 06:13 PM   #3
JeeperSean   JeeperSean is offline
Jr. Member
 
Join Date: Sep 2020
Location: Pennsylvania
Posts: 2
Quote:
Originally Posted by redjay View Post
You have a 6 inch spacer that you cut and you have a 5.65 spacer that you took out. Put the 5.65 spacer back in and take it for a ride ?
Oh for sure, just wondering if someone KNEW for sure, before I did the work, and then possibly have to do it all back again.
 
Reply With Quote
Old 05-24-2021, 08:09 PM   #4
redjay   redjay is offline
Top Contributor
 
Join Date: Feb 2008
Location: Ontario
Posts: 6,982
You have a Nomad, correct ?
 
Reply With Quote
Reply





Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.