|
12-07-2016, 10:58 PM | #1 |
Jr. Member
Join Date: Dec 2016
Location: South Georgia
Posts: 3
|
Led lights
I installed some Kuryakan razor eye led front and rear lights on my bike after I removed the stock front and rear turn signals and when I hit the turn signal all the turnsignals turn on such as in a four way flasher situation. What did I do wrong?
Login or Register to Remove Ads |
|
12-07-2016, 11:06 PM | #2 |
Join Date: May 2009
Location: Montreal QC
Posts: 12,034
|
Did you install load equalizers? If not that is your issue.
__________________
Norm Ward 2008 blue / silver nomad kawanow / VBA #01136 |
|
12-08-2016, 01:02 AM | #3 |
Join Date: May 2015
Location: Marietta, GA
Posts: 838
|
If they are flashing fast, what TipsyTed said is probably correct. If they are flashing at normal speed, just all 4 at once, you may need to install diodes to prevent crossover current. If they are flashing fast and all 4, then both fixes may be needed.
|
|
12-08-2016, 06:12 AM | #4 |
Jr. Member
Join Date: Feb 2012
Location: Albuquerque, NM
Posts: 39
|
Sounds like you need a diode. Had the same be issue on my V2K. Here is a write up on the installation for the VN2000, should be a similar procedure.
https://sites.google.com/site/rodsv2...ng/assignments Sent from my SAMSUNG-SGH-I537 using Tapatalk |
|
12-08-2016, 12:23 PM | #6 |
Sr. Member
Join Date: Jan 2008
Location: Cartersville, Georgia
Posts: 4,838
|
TipsyTed, did you try it with the bike running? When I first did mine, I just tried them out with the switch on, and they flashed like 4 ways. I started the bike, and they worked fine. It's several years later, and it still does like that.
__________________
Cliff "VulcanE" Evans 2005 Blue & Silver 1600 Nomad VBA # 320 VROC # 20381 |
|