*SOLD*Chuckster's dual plate air intake system

**Jared** · 09-08-2010, 03:43 PM

I currently have chucksters dual plate intake system on my bike and I'd like to go to the single plate system, mostly for cosmetic reasons.

The dual plate intake system allows you the benefit of a free-flowing intake system, while allowing you to still use the stock "dog bowl" covers.

For more info on the system, check out chuckster's site.
http://www.chucksterscustoms.com/Products

If someone has the single plate and wants to do some sort of trade, let me know.

These plate are in great condition, and as those who have purchased from Joe can testify, his stuff is top notch!

I'll sell them for $65.

**MAS Tequila** · 09-08-2010, 04:09 PM

Can't you just use the inner plate with the K&N or Mr Gasket air cleaner?

I have the single plate, which should be the same as your inner plate, with the Mr G air cleaner attached to it.

But BE WARNED it will be considerably louder than with the dog bowl.

MT

**Jared** · 09-08-2010, 04:13 PM

I too thought, when I bought the dual system, that it would be interchangeable. Not the case. The dual plate system is off center making the KN chrome outer plate unusable.

chuckster131 · 09-08-2010, 04:31 PM

Just retap a hole on center and all is good. You will have to plug off the two holes where the idle tubes are, but that back plate will work.

Quote:

Originally Posted by Utah Motorcyclist

I too thought, when I bought the dual system, that it would be interchangeable. Not the case. The dual plate system is off center making the KN chrome outer plate unusable.

**Jared** · 09-08-2010, 08:05 PM

After chatting with Joe I still decided to sell the plate. *SOLD

chuckster131 · 09-08-2010, 08:19 PM

Looks like I need to get to work then..... ;)

**Top Cat** · 09-09-2010, 11:32 AM

As long as you are getting back to work Joe, how about making me a belt conversion kit for my 800 Drifter. ;)

chuckster131 · 09-09-2010, 08:07 PM

I made one for the wifes 800 Classic, which is now my son's bike... To be honest and hate to say it, but Scoot Works has one that you can purchase.

It was a lot of work to make the one I have on the 800

Quote:

Originally Posted by Top Cat (TC)

As long as you are getting back to work Joe, how about making me a belt conversion kit for my 800 Drifter. ;)

**Top Cat** · 09-09-2010, 11:51 PM

Quote:

Originally Posted by chuckster131

I made one for the wifes 800 Classic, which is now my son's bike... To be honest and hate to say it, but Scoot Works has one that you can purchase.
It was a lot of work to make the one I have on the 800

Quote:

Originally Posted by Top Cat (TC)

As long as you are getting back to work Joe, how about making me a belt conversion kit for my 800 Drifter. ;)

You obviously haven't been following my posts on my scootworks adventure.
I ordered one in June, still waiing.

09-08-2010, 03:43 PM	#1
Jared Join Date: Mar 2009 Location: Greeley, Colorado Posts: 6,772	SOLDChuckster's dual plate air intake system I currently have chucksters dual plate intake system on my bike and I'd like to go to the single plate system, mostly for cosmetic reasons. The dual plate intake system allows you the benefit of a free-flowing intake system, while allowing you to still use the stock "dog bowl" covers. For more info on the system, check out chuckster's site. http://www.chucksterscustoms.com/Products If someone has the single plate and wants to do some sort of trade, let me know. These plate are in great condition, and as those who have purchased from Joe can testify, his stuff is top notch! I'll sell them for $65. __________________ Jared VBA #1051 (Former President) Login or Register to Remove Ads
	0

09-08-2010, 04:09 PM	#2
MAS Tequila Join Date: Jan 2009 Location: Psychiatric Ward FL Posts: 3,429	SOLDChuckster's dual plate air intake system Can't you just use the inner plate with the K&N or Mr Gasket air cleaner? I have the single plate, which should be the same as your inner plate, with the Mr G air cleaner attached to it. But BE WARNED it will be considerably louder than with the dog bowl. MT __________________ MT 2016 FLHP Psychiatric Ward FL VBA 936
	0

09-08-2010, 04:13 PM	#3
Jared Join Date: Mar 2009 Location: Greeley, Colorado Posts: 6,772	SOLDChuckster's dual plate air intake system I too thought, when I bought the dual system, that it would be interchangeable. Not the case. The dual plate system is off center making the KN chrome outer plate unusable. __________________ Jared VBA #1051 (Former President)
	0

09-08-2010, 08:05 PM	#5
Jared Join Date: Mar 2009 Location: Greeley, Colorado Posts: 6,772	SOLDChuckster's dual plate air intake system After chatting with Joe I still decided to sell the plate. *SOLD __________________ Jared VBA #1051 (Former President) Login or Register to Remove Ads
	0

09-08-2010, 08:19 PM	#6
chuckster131 Sr. Member Join Date: Sep 2007 Location: Jackson, Michigan Posts: 1,367	SOLDChuckster's dual plate air intake system Looks like I need to get to work then..... ;) __________________ Joe (Chuckster) Norris Jackson, Michigan 2007 Goldwing 2010 Voyager (Blue/Silver)sold 2001 Nomad (gone, but not forgotten) www.chucksterscustoms.com
	0

09-09-2010, 11:32 AM	#7
Top Cat Join Date: Jul 2007 Location: Peoples Republic of New York State Posts: 15,154	SOLDChuckster's dual plate air intake system As long as you are getting back to work Joe, how about making me a belt conversion kit for my 800 Drifter. ;) __________________ Tim "TC" Conley VBA #9 2011 Victory Kingpin mine 2013 Victory Boardwalk -hers [LEFT][COLOR=#000000] [SIZE=4]
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best air intake system	socwkbiker	1500 & 1600 Nomad	7	11-03-2013 08:44 PM
Chuckster's Dual-Plate Setup - Thoughts	taranis	Vulcan Nomad/Vaquero/Voyager	70	08-06-2012 07:41 PM
Hypercharger versus Chucksters Dual Plate Intake	Hacksaw	1500 & 1600 Nomad	24	08-29-2011 06:18 PM
Arrived! Chuckster's Dual-Plate Intake mod	taranis	1500 & 1600 Nomad	14	01-06-2011 08:38 AM
Chuckster Dual Plate Intake Installation	Cajunrider	Engine	0	11-08-2010 05:43 PM