sidestand switch wiring diagram .....

[Teachme]

hey guys i got a viper pager i am just now getting around to installing id like to tie it into the sidestand switch but not at the ground for sake of wire routing. does anyone have a diagram of the switch or know where it ties into the run circuit higher up on the bike. thanks in advance.

[HwyRider]

[HwyRider]

Looks like it goes in to the junction box.

[Teachme]

Thanks man found my manual finally. i Ordered a tk103b but it wont be here in time for my beach trip.

[Teachme]

and the black/yellow is the common Vulcan ground wire so i'd need to tap the gray and white wire going into the junction box and tie it to a grounded trigger on the viper paging system. Sound right to you?

[cnc]

Originally Posted by Teachme

and the black/yellow is the common Vulcan ground wire so i'd need to tap the gray and white wire going into the junction box and tie it to a grounded trigger on the viper paging system. Sound right to you?

Depends if lifting the kick stand completes the ground or interrupts it. I suspect it completes it because the clutch switch is tied into that grey white wire meaning that should the stand be down the ground is completed when the clutch is pulled in. Easy enough to check with a meter.

[Teachme]

Yeah ill meter it first but i figured ground would kill run not allow but always meter.