Want to install front lights on a 2010 Nomad

**bogatyrs** · 11-17-2010, 05:10 PM

I want to install aftermarket lights on my new 2010 Nomad. I have been told that only the Kawi ones fit.

Has anyone had any experience with this and suggestions.

Bogie

drno · 11-18-2010, 07:31 PM

The Kawa ones fit real nice.

**BudMan** · 11-18-2010, 08:06 PM

Chuckster a member here makes a lightbar.

http://www.chucksterscustoms.com/Products

**BudMan** · 11-18-2010, 08:09 PM

Oops, I notice he doesn't have one for the 2010.

**BudMan** · 11-18-2010, 09:13 PM

One more try :) These are what I have. It took me awhile to find the page.
I don't know if they will fit on a 2010.

http://store.valueaccessories.net/lightbarslightsincludedfornomad160005.aspx

ells · 11-20-2010, 01:53 PM

Those in my sig pic below are $17 at Wally World, complete with wiring kit, 50W each (the headlight is 100W) and install in a few minutes plus the wiring taking maybe an hour.

Sin City Stan · 11-21-2010, 02:50 PM

Quote:

Originally Posted by Bogie

I want to install aftermarket lights on my new 2010 Nomad. I have been told that only the Kawi ones fit.

Has anyone had any experience with this and suggestions.

Bogie

It can be done. But I haven't been real happy with the quality of the product.

ells · 11-21-2010, 04:25 PM

Stan,

Those look like the Burners from WallyW. I eventually had to replace the sockets, which come right out with bulb removed and are a $2 standard hardware store item. Then sealed them up on the backside with some RTV and have been solid since. Front ring is a little tricky/flaky but never had it fall off. Mounting them on one of the lowers bolts saves some original installation effort, but not sure that works on a 1700

Sin City Stan · 11-21-2010, 07:52 PM

Quote:

Originally Posted by Ells

Stan,

Those look like the Burners from WallyW. I eventually had to replace the sockets, which come right out with bulb removed and are a $2 standard hardware store item. Then sealed them up on the backside with some RTV and have been solid since. Front ring is a little tricky/flaky but never had it fall off. Mounting them on one of the lowers bolts saves some original installation effort, but not sure that works on a 1700

I'm on my second set of sockets. In my case the sockets were not water contaminated but just became loose and made poor contact with the lamp. I like the triangular look and am trying to find something a little more reliable.

**bogatyrs** · 11-22-2010, 01:21 PM

Thanks a lot for the info. I may have found a soulution with my dealer who has made me an offer I can't refuse. He has a Kawi light bar and will let me have it for slightly above what I could buy aftermarket bar and installed.

I like to go OEM if the price is right since I don't have the facility to do a lot of self work where I live - not the best garage at my condo...

Bogie ;)

11-17-2010, 05:10 PM	#1
bogatyrs Join Date: Nov 2010 Location: Southern Ontario Posts: 706	Want to install front lights on a 2010 Nomad I want to install aftermarket lights on my new 2010 Nomad. I have been told that only the Kawi ones fit. Has anyone had any experience with this and suggestions. Bogie __________________ Bogie (aka Mike) KawaNOW #01650 Bell City Riders #21 SCRC 329 2010 Nomad (The Beast) Previous Bikes 2008 - 900 Vulcan Classic 1958 HD HydraGlide Login or Register to Remove Ads
	0

11-18-2010, 07:31 PM	#2
drno Member Join Date: May 2009 Location: Lethbridge, Alberta Posts: 294	Want to install front lights on a 2010 Nomad The Kawa ones fit real nice. __________________ Made ya Look
	0

11-18-2010, 08:06 PM	#3
BudMan Join Date: May 2009 Location: Greenwood, Ark. Posts: 4,736	Want to install front lights on a 2010 Nomad Chuckster a member here makes a lightbar. http://www.chucksterscustoms.com/Products __________________ Dave Jesse 2012 1700 Gray/Black Voyager 2006 1600 Nomad Green/Silver Sold VBA #1108 2010- Eureka Springs - Antlers - 2011- Maggie Valley - Antlers 2012- Margaritaville Ride - Van Buren - Antlers - 2013- Estes Park - Antlers 2014- Mountain View - Antlers - 2015- Eureka Springs - Antlers 2016- Salem - Antlers - 2017- Eureka Springs - Lake George - Antlers - 2018- Custer - Antlers
	0

11-18-2010, 08:09 PM	#4
BudMan Join Date: May 2009 Location: Greenwood, Ark. Posts: 4,736	Want to install front lights on a 2010 Nomad Oops, I notice he doesn't have one for the 2010. __________________ Dave Jesse 2012 1700 Gray/Black Voyager 2006 1600 Nomad Green/Silver Sold VBA #1108 2010- Eureka Springs - Antlers - 2011- Maggie Valley - Antlers 2012- Margaritaville Ride - Van Buren - Antlers - 2013- Estes Park - Antlers 2014- Mountain View - Antlers - 2015- Eureka Springs - Antlers 2016- Salem - Antlers - 2017- Eureka Springs - Lake George - Antlers - 2018- Custer - Antlers
	0

11-18-2010, 09:13 PM	#5
BudMan Join Date: May 2009 Location: Greenwood, Ark. Posts: 4,736	Want to install front lights on a 2010 Nomad One more try :) These are what I have. It took me awhile to find the page. I don't know if they will fit on a 2010. http://store.valueaccessories.net/lightbarslightsincludedfornomad160005.aspx __________________ Dave Jesse 2012 1700 Gray/Black Voyager 2006 1600 Nomad Green/Silver Sold VBA #1108 2010- Eureka Springs - Antlers - 2011- Maggie Valley - Antlers 2012- Margaritaville Ride - Van Buren - Antlers - 2013- Estes Park - Antlers 2014- Mountain View - Antlers - 2015- Eureka Springs - Antlers 2016- Salem - Antlers - 2017- Eureka Springs - Lake George - Antlers - 2018- Custer - Antlers Login or Register to Remove Ads
	0

11-20-2010, 01:53 PM	#6
ells Sr. Member Join Date: Dec 2007 Location: Boulder County, Colorado Posts: 2,014	Want to install front lights on a 2010 Nomad Those in my sig pic below are $17 at Wally World, complete with wiring kit, 50W each (the headlight is 100W) and install in a few minutes plus the wiring taking maybe an hour.
	0

11-21-2010, 04:25 PM	#8
ells Sr. Member Join Date: Dec 2007 Location: Boulder County, Colorado Posts: 2,014	Want to install front lights on a 2010 Nomad Stan, Those look like the Burners from WallyW. I eventually had to replace the sockets, which come right out with bulb removed and are a $2 standard hardware store item. Then sealed them up on the backside with some RTV and have been solid since. Front ring is a little tricky/flaky but never had it fall off. Mounting them on one of the lowers bolts saves some original installation effort, but not sure that works on a 1700
	0

11-22-2010, 01:21 PM	#10
bogatyrs Join Date: Nov 2010 Location: Southern Ontario Posts: 706	Want to install front lights on a 2010 Nomad Thanks a lot for the info. I may have found a soulution with my dealer who has made me an offer I can't refuse. He has a Kawi light bar and will let me have it for slightly above what I could buy aftermarket bar and installed. I like to go OEM if the price is right since I don't have the facility to do a lot of self work where I live - not the best garage at my condo... Bogie ;) __________________ Bogie (aka Mike) KawaNOW #01650 Bell City Riders #21 SCRC 329 2010 Nomad (The Beast) Previous Bikes 2008 - 900 Vulcan Classic 1958 HD HydraGlide
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front Fender Trim for 2010 Nomad	captram1	Parts & Accessories	4	04-07-2011 09:28 PM
1500 Nomad and 2010 Goldwing	cyclecat	Vulcan Nomad/Vaquero/Voyager	54	08-11-2010 07:31 AM
Hopkins 46365 Trailer Lights Converter Install	Cajunrider	Electrical	0	04-17-2010 04:25 PM
Need new mini front amber LED signal lights	mikesth	1500 & 1600 Nomad	1	08-17-2008 01:43 PM
Easiest modulator to install on a Nomad?		Vulcan Nomad/Vaquero/Voyager	2	12-28-2007 05:35 PM